Availability
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 364 )
$291.99
—
$439.99
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
Allstar Performance torque converters offer power and economy for your moderate drag racing, factory, or street stock machines. These Allstar converters are completely remanufactured with new pump drive hubs and thrust washers. Choose from several stall speeds for your GM, Chrysler, or Ford transmission. Exact stall speeds will vary, depending upon displacement, torque, and vehicle weight. Transfer your engine torque with value-priced Allstar Performance torque converters.
( 9 )
$319.99
—
$339.99
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$437.99
Boss Hog Night Stalker Series torque converters can take you from towing to rock crawling. They're offered in four levels to perfect your performance needs and designed to handle as much as 500 hp. The Boss Hogs use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. From stock to mildly modified vehicles, the Stalker Series torque converters offer performance that is tough and reliable. Over a hundred models are available; order the converter recommended for your transmission application.
( 135 )
$348.58
—
$498.57
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch, and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 101 )
$400.35
—
$496.71
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$517.95
$465.95
Boss Hog LS Night Stalker Series torque converters can take you from towing to rock crawling. They're offered in four levels to perfect your performance needs and designed to handle as much as 500 hp. The Boss Hogs use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. From stock to mildly modified LS-based engine equipped vehicles, the Stalker Series torque converters offer performance that is tough and reliable. With multiple models available, order the converter recommended for your transmission application.
( 30 )
$390.05
—
$458.68
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$399.95
—
$549.95
$359.95
—
$493.95
With the largest selection of remanufactured torque converters in the world to fit any transmission, model, or vehicle application, all VEGE remanufactured torque converters are built with parts that are of equal quality or higher quality than OEM (Original Equipment Manufacturer) parts, including VEGE's heavy-duty remanufactured torque converters. You can expect the best with VEGE! Specializing in reliable, yet affordable, sealed torque converters, VEGE torque converters are among the most popular in the industry. Their unique process combines the skillful experience of bench craftsman with the industrial engineering production line. Choose the torque converter model suited to your application needs.
( 10 )
$288.99
—
$298.99
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$382.99
—
$415.99
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 52 )
$292.99
—
$348.99
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$424.95
—
$441.95
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 235 )
$416.99
—
$437.99
These TCI Fast-Lap torque converters provide the best of all benefits, including great acceleration when you need it. Utilizing an extremely low stall speed, these torque converters also provide more engine braking going into the corners and faster acceleration coming out of the turns. The Fast-Lap torque converters are the ideal solution for racers looking for better performance at a reasonable price. Combining 35 plus years of torque converter technology and on-track testing, the engineers at TCI selected the optimum stall speed for dirt and pavement Circle Track competition. These reduced stall speed torque converters incorporate heavy-duty oversized bearings for increased load capacity and less drag to deliver a product that is far superior to stock and other aftermarket converters currently available. Like every TCI torque converter, these units feature the exclusive HDT Coating for improved temperature transfer and are triple tested to ensure durability and on-track performance.
( 14 )
$364.95
—
$374.95
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 47 )
$371.95
—
$397.95
Designed especially for classes where a functional torque converter is required, these Circle Track converters are built to maximize efficiency and reduce slippage. These converters can reduce lap times by over a tenth of a second when compared to a stock converter. Other benefits include a rotating weight reduction of several pounds (all removed from the outside diameter, and thus improving engine braking in corners) and reduced transmission operating temperatures.
( 4 )
$439.95
—
$487.95
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$429.99
—
$488.99
ACC Performance has built the ultimate low-stall Circle Track converter for you--Boss Hog Chevy Direct Drive Dummy converters. They give you the hard in and out to the corner performance that you need and expect. Boss Hog Chevy Direct Drive Dummy converters are built track-tough with the finest heavy-duty materials; Industrial bearings--not light-duty--give these converters the ability to handle large torque, and aircraft aluminum washers are used, putting more horsepower and torque to the ground, where you need it. Boss Hog converters are welded to eliminate erosion after time, unlike brazing that will erode and ruin your stators and other rotating parts of your transmission.
Not Yet Reviewed
$410.87
—
$441.31
Summit Racing™ Head Bolt drill jigs are dual-use tools you will want to add to your tool arsenal for engine machine work, especially when boring and honing cylinder bores. The drilling template also serves as a torque plate when converting from M11 studs to 1/2 in. head studs. Our torque plate drill jigs are crafted from aluminum and anodized red. Features, specs, and notes: * Torque plate works with M11 and 1/2 in. bolt sizes * Ten stepped drill bushings included for enlarging head bolts to 1/2 in. * Torque the studs or bolts to manufacturer's specs with recommended lube * A few 7/16 in. or 1/2 in. washers may be required on top depending on the exposed threads of the fastener * See suggested or required items for solid dowels if using plate as a drilling template.
Not Yet Reviewed
$349.99
The economical TCI Street Rodder transmission is ideal for small block powered vehicles, producing up to 400 hp—perfect for a mild daily driver or street rod. Equipped with a TCI automatic valve body and valve body improver kit, the Street Rodder allows you to achieve a firmer, yet not too harsh shift in the vehicle while remaining fully automatic. These torque converters are available in a variety of size options for nearly a dozen Chevy, Ford, and Mopar transmission models.
( 16 )
$343.95
ACC Performance Boss Hog Chevy dirt track converters are designed and built to perform under the harsh conditions and stresses of dirt track racing. They are made with industrial bearings, aircraft-quality aluminum washers, high-tech welded seams, and are hand-built and tested. ACC has improved and removed the weak spots on these converters so that they can take more abuse for serious racing. Don't give up power on the track. These converters have modified fins to produce an ultra-low stall--1,600-1,800 rpm for better engine braking into the corners and acceleration off of the corners.
Not Yet Reviewed
$410.87
—
$479.27
Detroit Speed EXO Brace fixes a notorious failure point on the Fox Body platform--the point where the upper links mount to the chassis. The factory torque boxes weaken over time and are known to tear or even rip completely out of the vehicle and losing an upper link mount can result in unpredictable handling and is dangerous--at any speed. DSE developed an effective bolt-on (or weld-in) solution that improves the rigidity of the torque box, prevents damage to the chassis, and improves the safety of the vehicle. It ties the link pockets into the frame and floor pan on both sides and connects the two boxes side-to-side with a telescoping feature. The Detroit Speed EXO Brace kit is a highly recommended addition to any Fox Body Mustang--especially those that are driven hard with higher horsepower. Additional features: * A bolt-on kit with weld-in capability; welding the kit in supports torque boxes in cars 400+hp * Ties link pockets into the frame and floor pan on both sides of the frame rail, as well as connecting the two boxes side-to-side with a telescoping feature * Provides second adjustment hole for upper link to help correct instant center on lowered cars * Works with factory links in both hole positions
Not Yet Reviewed
$451.95
If your starter is no longer engaging your Harley's® engine, get it involved with All Balls Racing high-torque starters. They're manufactured with all-new components fine-tuned for starting your Harley-Davidson® V-Twin engine. Make it the perfect performance union with All Balls Racing starters. The high-torque starters feature: * Clutches with 20 percent oversize rollers * Idler gears manufactured from cold-headed steel * End-frames which are cold-chamber die-cast and precision-machined * Armature hairpins resistance-fused to the commutator * A 10/32 in. threaded output shaft * Conversion bolt for the earlier 1/4 in.-20 threaded output shafts * Choice of finish, including chrome or black powdercoat
( 3 )
$364.21
—
$472.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
