Availability
TCI trans-brake kits allow you to achieve maximum torque converter stall for quicker and more consistent reaction and 60 ft. times. They work like this: When the trans-brake is engaged, the vehicle can roll neither forward nor backward, and as you press on the accelerator, the engine can rev as high as the torque converter stall. Once the brake is released, power is immediately transferred to the rear tires, with less parts breakage than with a manual transmission.
( 21 )
$570.95
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch, and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 99 )
$400.35
—
$496.71
Get maximum performance and quicker ETs with these TCI full manual valve bodies. They're engineered to allow full manual control of the valve body, for quicker shift timing and higher line pressures. You get less clutch slippage under high load, so that more power gets to the ground. They're a great choice for bracket cars, monster trucks, and virtually any off-road competition vehicle where a transbrake is either illegal or undesirable.
( 59 )
$302.95
—
$338.95
ATI Super Pump front pumps are CNC-machined from billet aluminum or permanent-mold aluminum castings for precision and durability. Re-engineered lubrication circuits allow for increased flow volume in all critical areas. ATI increased the thickness of the pumps to improve oil pressure and volume at low rpm, resulting in a cooler-running transmission and converter. Features: * Superior pressure * Improved trans-brake hold * Prevents stator tube spinout
( 4 )
$331.99
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * LS Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * LS Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 10 )
$500.44
—
$556.04
Hughes Performance full manual valve bodies from are a must for competition applications. They provide full manual control over all shifts and deliver them without delay or time-costly overlap. These valve bodies are used for events where a trans-brake is not needed, such as in tractor pull, monster truck, and other track applications. They're available in both standard shift and reverse-pattern manual valve bodies.
( 6 )
$291.99
—
$356.99
TCI's new gearotor front pumps offer several design advantages over OEM-style involute pumps, including low rpm flow and reduced horsepower consumption. Other features include longer life, low noise, reduced cavitation, a positive trans-brake application, and a reduced occurrence of slipping reverse clutches when backing or at idle speed. Their gears are created with the latest in powder metal technology for strength and are then coated for wear resistance. A redesigned, bolt-in style stator support eliminates the possibility of spinning. A hardened steel sleeve yields greater wear resistance from input shaft sealing rings, and to top it off, a TH-350/400-style input shaft bushing makes swaps easy.
( 1 )
$479.95
No matter which automatic transmission your street rod or race car has, TCI Diablo shifters have you covered. Using TCI patent pending Diablo technology, the shifters have a fully configurable design that allows the user to set them up to utilize either a front or rear exit cable—and configure them for 2-, 3-, 4-, or even 6-speed transmissions in both forward and reverse shift patterns. There is no longer a need to buy and replace parts if you are changing shift order/configuration, or changing transmissions entirely. The TCI Diablo shifters are also available with an optional 2-button die-cast aluminum handle for controlling nitrous, transbrake, or shift points.
( 17 )
$452.95
—
$597.95
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 32 )
$437.99
All Hughes Performance Pro Competition 45 Series converters have a full needle bearing replacement of fiber washers. Special silicon spot brazing on top and bottom adds strength and reliability. Hughes installs a premium-built sprag assembly and a specially machined stator in these converters, giving you the performance edge you need off the line.
( 3 )
$437.99
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$437.99
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$529.95
Hughes knows that the most important factor in performance driving is how your car leaves the starting line. These Competition 40 Series converters are exclusively designed for the serious racer. The replacement of the fiber thrust washers with heavy-duty needle bearing packages enables these converters to be run on the street, but they're recommended just for strip use. They'll get you the torque you need, when you need it, to get you off the line and on your way to the winner's circle.
( 3 )
$437.99
Shifnoid electric shifter solenoid kits provide hands-free automated shifting for accurate and consistent shifts points. They are designed to wire into any rpm activated switch, timer, or push button. The Shifnoid electric shifter solenoid kits are available for B&M, Hurst, or TCI shifters, and include the required aluminum bracket to mount the solenoids. Now with the help from the Shifnoid electric shifter solenoid kits, you can make hundreds of runs down the race track and ensure reliable, consistent shifting.
( 53 )
$304.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
