Availability
ZROADZ front roof LED brackets are laser-cut from 3/16 in. mild steel and finished in a low-gloss textured black finish to complement your vehicle with strength and style. The brackets are available to mount LED light bars or pods (both sold separately) and feature ZROADZ's patented single through-bolt attachment and include a heavy-duty solid rubber gasket for a watertight seal. The patented thru-bolt fasteners provide a secure mount with minimal exterior penetration and a convenient method to run wires into vehicle cab without the worry of weatherstripping wind noise and leaks, or other subpar wire routing methods. Order the brackets designed to fit your application.
( 1 )
$334.50
—
$424.50
ARB offers slimline roof rack lights that are for use with their base roof racks. Complementing the sleek design and mounting system of the ARB base rack, these roof rack light bars utilize the simple mounting system of the bar rack, allowing them to be quickly and easily setup. Sitting at 36 in. wide, the mounting system will provide provisions for the light bar to be installed either in the front of the rack or neatly tucked up underneath. Upgrade your vehicles utility with these slimline roof rack lights by ARB. Additional features and benefits: * Extruded aluminum body with stealth black powdercoat finish * Includes 304 stainless hardware * Brackets included allow two mounting options dependent on roof rack * Virtually indestructible polycarbonate lens * Unique reflector design provides optimum distance and width for highway driving, limiting light reflection off hood or bumper * Combo beam technology provides excellent mid-to long-range spread as well as distance down the road * Mounts suitable for base rack and ARB Trade and Touring racks * Offers reverse polarity protection * Breather with pressure-tested seal, and vibration and UV tested * Dust and waterproof to IP68 * Two-pin, over-molded, waterproof plug * Suitable for use with ARB driving light loom (sold separately)
Not Yet Reviewed
$499.95
Clearance
ZROADZ front roof LED light kits come complete with light, mounting brackets, wiring harness with fusible link, relay, switch, and all necessary hardware. The kits are offered with curved light bars, straight light bars, or roof top side-mounted pods. Packages are also available that combo light bars with top side-mount or A-pillar/hinge-mount pods for extreme auxiliary illumination. All ZROADZ light bars and pods have CREE LED chips, premium optics, and clean, crisp light output set in IP67/68/69 rated housings to provide extreme waterproof protection in off-road environments. ZROADZ front roof light kits feature laser-cut mild steel mounting brackets and a heavy-duty solid rubber gasket for a secure, watertight installation. Many of the roof brackets feature a patented through-bolt fastener that provides minimal exterior penetration and a convenient method to run wires into the cab without the worry of weatherstripping wind noise and leaks or other subpar wire routing methods. Choose the style and fit for your vehicle and order today from Summit Racing™.
Not Yet Reviewed
$974.50
$469.50
—
$489.50
Own the night with Rigid Industries roof mount brackets. Each bracket is designed to make installation of a light bar easy, giving you a high light to light up the trails. Designed to be tough, Rigid uses laser-cut stainless steel then applies an abrasion- and UV-resistant black powdercoat finish to make sure they look great and last. Don't drive blind, light up the darkness with Rigid Industries roof mount brackets.
Not Yet Reviewed
$403.99
On Sale
Add extra-bright light to your ride on the fly with our Summit Racing™ LED light bars. They employ quality LED chips with a tempered glass lens, all surrounded with an aluminum housing for durability and excellent heat dissipation. These auxiliary lights are IP67 rated for dust and moisture sealing to offer lasting service—and include wiring harness, relay and light switch, and mounting brackets to facilitate an easy installation. The light bars provide multiple uses: driving lights, reverse lights, bed lights, etc.; and they offer versatile mounting options on your rig, such as the roof, the front or rear bumpers—just about anywhere! Order the length and wattage needed for your vehicle.
( 32 )
$339.99
—
$389.99
$305.99
—
$350.99
Rough Country LED upper windshield light bar kits are easy-to-install and present the ultimate solution for adding an aggressive looking, forward-facing lighting system to your Jeep. With modern, stylistic design and superior strength, the included powdercoated mounts securely hold the 50 in. light bar between the top of your Jeep's windshield and roof, spanning the entire width of the roof and providing a killer look. Kits include: * Premium, flat-wound wiring harness with on/off switch * Brackets with laser-cut RC logo * Hardware
Not Yet Reviewed
$299.95
—
$439.95
Hella LED 470 light bars were developed for the special requirements of off-road vehicles, and for aerodynamic installation on the roof of truck cabins, but their slim design enables them to be mounted in various spaces on heavy-duty trucks, pickups, and cars. With 16 brilliant LEDs and 1,900 lumens, Hella 470 light bars will provide added radiance to the road ahead of you. The housing is made of thermo-conductive plastic, allowing for effective heat dissipation from the LED electronics. The rear of the housing is an innovative ribbed designed, and the lights include stainless steel mounting brackets that allow for flexible positioning. Hella LED 470 light bars are IP 6K7 and IP 6K9K rated for protection against dust, temporary water immersion, and high-pressure/steam jet cleaning.
( 1 )
$329.99
—
$456.99
Hella LED 350 light bars are aerodynamically designed, a mere 1.7 in. tall, and their brackets allow flexible mounting for even better airflow. These fully sealed and submersible light bars dissipate heat through their thermo-conductive plastic housings to keep the high performance LEDs from overheating. Ideal for long-range, off-road use, they come with wire leads, instructions, and are available in several styles to fit your lighting needs. For lightweight performance, you need Hella LED 350 light bars. Additional features include: * Developed for the special requirements of off-road vehicles and for installation on the roofs of truck cabs * Slim design allows mounting on heavy-duty trucks, pickups, SUVs, and cars * The rear of the housing features an innovative ribbed design * Effective heat dissipation from the LEDs * Suitable for horizontal mounting * Stainless steel mounting brackets * Two intensity light settings for wide and narrow beam versions * Available beam patterns: driving, pencil, wide, and narrow * Driving and pencil beams are ECE-approved
Not Yet Reviewed
$255.99
—
$360.99
Rigid Industries' A-Pillar Mount kit with D-SS PRO-Series Lights is designed for specific vehicles—and allows for a clean install of Rigid's high-output LED lighting. The kit includes mounting brackets, 40 in. SR-Series PRO single-row LED light bar with combination spot/flood optics, and a wiring harness. Professional installation recommended. Additional details: * Complete LED Light Roof Mount LED Light Bar Mount Kit * Stainless Steel Construction * UV and Abrasion-Resistant Powdercoat * 40 in. SR-Series LED Light Bar Included * Wiring Harness and Switch Included
Not Yet Reviewed
$508.99
—
$550.99
If you want the best performance from your LED light bar, you'll need a pair of Anzo LED light bar brackets. Anzo is an emerging leader in performance lighting technology and offers affordable products designed and tested to adhere to international quality standards. These LED light bar brackets are quality components that add a reliable mounting system to any vehicle—and are available for roof, hood, windshield frame, and tube mounting. They're offered in a variety of styles and for different vehicles and light bar sizes. Additional product details: * Laser-cut designs * Available in aluminum and steel * Natural and black powdercoat finishes * Designed and built for strength and durability * Weatherproof * One-year manufacturer warranty
Not Yet Reviewed
$299.99
LED lights brighten the night to incredible degrees, but mounting them where they're needed isn't so simple. ZROADZ auxiliary light mounting brackets have are available in vehicle-specific and universal designs for optimum placement, coolness, and style. These laser-cut steel brackets are pressed, formed, drilled, and powdercoated with a black finish. Most units are bolt-on, while longer roof mounts require a single hole for routing wiring (includes a rubber grommet). ZROADZ auxiliary light mounting brackets put the glow where it's needed. Features include: * Configurable with available forward, side, and rear-facing mounts * Allows customized and adaptable modular accessory mounting * Lifetime product warranty
( 2 )
$414.50
Dee Zee's innovative Hex Series designs have expanded to roof racks for select 2- and 4-door Jeep Wrangler and Gladiator models. These 24 in. racks are designed to cover the front or rear doors, or you can purchase two racks to cover both sets of doors. Mounting is easy by installing onto the existing drip rails, no drilling required! The cross-bars move forward and backward for the perfect mounting location of light accessories, bikes, sailing gear, watercraft such as canoes, kayaks, or paddle boards, roof top tents and more! Features, specs, and benefits: * Durable aluminum construction with black textured powdercoat finish * Extruded hex tubes offer angular style * 24 in. roof rack can be fitted either above the front or rear doors * Adjustable (can be moved forward or backwards) * 24 in. wide x 60 in. long roof rack * 200 lb. weight limit (per rack) * Adapters included
( 2 )
$310.99
—
$506.99
Smittybilt offers Defender roof rack mounts for a variety of applications, including many Ford, Jeep, Subaru, and Toyota trucks from 2007 and up. Defender Platform Racks are made from 2.8mm extruded aluminum, finished in a light textured black powdercoat. Aerodynamic styling blends well with today's vehicle designs. Integrated cross bar flooring maximizes functionality. Multiple mounting options offer a secure attachment to any vehicle. The Defender Platform Rack line is produced to exacting standards, and built for years of trouble-free use. Ease of installation is always at the forefront of Smittybilt designs. These are the bolt-on MOUNT KITS ONLY. Racks sold separately.
Not Yet Reviewed
$299.99
Rhino-Rack USA Vortex SX roof racks are designed specifically for use with vehicle roofs that feature rails. Easy to install and remove, each system comes with the security hardware to protect your rack against theft. Engineered for ultimate cargo versatility, the stylish application-specific roof racks with sleek aerodynamics minimize wind noise and drag. These premium systems provide the additional hauling space you so often need. All aluminum bars include the VGS rubber strip, which adds protection for your roof racks and load. Many optional roof rack accessories can be added onto this system. Be sure to check out everything Rhino-Rack USA has to offer that can be added to crossbars to provide even further versatility for your Vortex SX Roof Rack. Select the model recommended for your vehicle. Key features: * Constructed from premium materials—strong and built to last * Quick and easy installation and removal * Comes with security hardware to protect against theft * Easy access to bar channel allows quick accessory installation * Suitable for light off-road use * Black powdercoat finish * Tested and approved to Australian AS1235-2000 standards
Not Yet Reviewed
$513.97
—
$533.99
Off-road adventures require serious gear, and flimsy racks just don't cut it, especially for Polaris ADV 5 models. Rough Country's Xpedition roof racks are the solution. These heavy-duty racks boast features like adjustable cross rails, light bar compatibility, and a durable powdercoat finish. The slotted cross rails feature tracks that let you slide your mounts and accessories anywhere for a perfect, custom fit. For the adventurer who wants to navigate uncharted territory in the dark, the Xpedition roof racks have a beefy front section that can handle the addition of an LED light bar (sold separately). These all-steel roof racks also feature a tough powdercoat finish that protects against scratches, fading, and rust and uses top-quality stainless steel hardware to keep your rack looking sharp for years to come. In addition, the Rough Country Xpedition roof racks utilize existing attachment points for a stress-free, bolt-on installation that gets you trail-ready in no time. So ditch the flimsy racks and level up your Xpedition's game with a Rough Country roof rack—the ultimate partner for your off-road excursions that will let you conquer trails, blaze new paths, and look good doing it! Select the preferred model for your UTV.
Not Yet Reviewed
$399.95
Rhino-Rack USA Heavy-Duty RL110 Roof Racks are the system of choice for vehicles that have protruding side gutters. Easy to install and remove, they're ideal as a non-permanent solution—yet offer great strength and durability. Utilizing tough, heavy-duty aluminum bars, these systems offer you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a traveler, cyclist, surfer or tradesperson, the RL110 roof rack systems have you covered. They're available in 1, 2, 3, or 4-bar kits for a wide range of applications. Additional notes: * Bars are available with a black powdercoat or clear anodized finish * Comes with security hardware * Strong and built to last * Suitable for light off-road use * Tested and approved to meet Australian Standards AS1235-2000
Not Yet Reviewed
$497.96
—
$509.96
Whether you're traveling down a lonely trail or setting up camp at night, extra lights come in handy. Go Rhino SR20 roof racks come with 2 pre-cut squares on the included aerodynamic fairing for mounting 3 in. LED cubes (lights not included). These tubular steel racks feature a powdercoat finish for corrosion resistance, multiple tie-down points, and an easy installation on factory or aftermarket cross bars. Haul the gear you need with Go Rhino SR20 roof racks. Order the length preferred for your vehicle.
( 4 )
$404.99
—
$469.99
CA offers rear roof panels for a variety of Chevrolet Corvette coupe models from the 1960s, '70s, '80s, and '90s. These molded ABS plastic replacements are manufactured in accordance with factory specifications to ensure proper fitment and appearance. They're available in more than 30 color shades. Order the pair recommended for your vehicle.
Not Yet Reviewed
$251.99
With pre-configured mounting holes, KC HiLiTES Xross overhead light mount bars can securely hold anywhere from two to nine 4 in. lights with ease. Slotted holes allow for extra customization and to accommodate a variety of light sizes. Xross bars feature a recessed channel and series of R-Clips for an integrated wire management system. Simply attach your lights and run wiring underneath through the recessed channel for a quick, clean, and easy install. No messy wires and zip-ties here; KC has taken the headache out of wiring multiple lights to get you on the road quickly. The 50 in. bars feature a low-profile aerodynamic design constructed from high-quality 6063 T6 extruded aluminum in an attractive satin black powdercoat finish. This makes the KC Xross bars lighter than steel bar options on the market, while being highly durable with their resistance to corrosion and rust.
( 1 )
$324.99
Whether off-roading or camping, transform your campsite in seconds with a Touring retractable awning from ARB. Each awning is constructed from tough PU coated 300gsm poly/cotton canvas to prevent rips and tears; has a UVP 50+ rating to block harmful UV rays; is fully waterproof; and comes with anodized aluminum telescoping legs to make adjustments quick and easy. Featuring a slim LED light strip, these awnings ensure you have light where you need it most. Packed with high-quality LEDs, the strip provides up to 1,200 Lumens. It's sealed in a waterproof housing and can switch between cool white or amber modes. The light strip is also adjustable via a waterproof dimmer switch, comes with an aluminum track for heat dissipation, and rolls up with the awning roof for easy storage. Every awning comes with pegs and rope for securing the legs to the ground, along with stainless steel mounting hardware, a storage bag, and step-by-step instructions. Each LED light includes a 12V adapter and 13 ft. of insulated waterproof wire.
Not Yet Reviewed
$299.00
If you want a roof rack that's adaptable, easy to use, strong and lightweight, then the Rhino-Rack USA Vortex 2500 roof racks are the ideal solution. No need for specialist fitment, you can install the Vortex 2500 roof rack to your vehicle at home in a few quick, easy steps. By utilizing black powdercoated aluminum bars, this system offers you compatibility with a wide selection of Rhino-Rack accessories. With special molded pads and custom-fit clamps tailored to fit your vehicle's door jamb curves, Vortex 2500 roof racks are secure, strong, and efficient—so you can really relax behind the wheel knowing that your gear is safe. Choose the roof rack model designed for fitment on your vehicle. Key features: * Stylish look for your vehicle * Santoprene rubber pads won't rub off onto your vehicle * Incredible strength due to glass-reinforced nylon legs * Specifically molded to fit the contours of your vehicle's roof * MasterKey compatible * Lockable legs for added security * Simple and effective leg clamp attachment is easy to install and remove * 2500 features Rhino-Rack Vortex bars with wind noise-reducing VGS strips * Suitable for light off-road use and offers long-term performance * Easy to install and remove * Tested and approved to Australian Standards AS1235-2000
Not Yet Reviewed
$302.97
—
$550.96
Traveler, cyclist, or surfer, Rhino-Rack USA Vortex Stealthbar roof racks will meet your needs. These low-profile roof rack systems sit a mere 1 1/2 in. (35mm) above factory raised rails. Easy to install and remove, they are ideal as a non-permanent solution, yet offer great strength and durability. The flush-style Vortex bars are cut to an exact length as determined by the width of your vehicle's roof, creating a stylish looking roof rack for your vehicle that is compatible with a wide selection of accessories. Features: * Ideal for low clearance * 50mm of adjustability per side * Removable * Easy to install/remove * Stylish * VGS bar strip greatly reduces wind noise * Strong and built to last * Suitable for light off-road use
Not Yet Reviewed
$503.97
Rhino-Rack USA Heavy-Duty 2500 roof racks are matched to fit the contours of your vehicle's roof. They're easy to install and remove—ideal as a non-permanent solution, yet offering great strength and durability. With special molded pads and custom-fit clamps tailored to fit your vehicle's door jamb curves, the HD 2500 roof rack is secure, strong and efficient. You can really relax behind the wheel knowing that your gear is safe. The 2500 roof racks are available in 1-bar and 2-bar versions for a wide range of specific applications. Additional details: * Santoprene rubber pads won't rub off onto your vehicle * Incredible strength due to glass-reinforced nylon legs * Aluminum racks are black powdercoated or clear anodized * MasterKey compatible * Lockable legs for added security * Simple and effective leg clamp attachment is easy to install and remove * 2500 features Rhino-Rack Heavy-Duty bars with wind noise-reducing VGS strips * Offers long-term performance * Suitable for light off-road use * Compatible with a wide range of accessories * Tested and approved to Australian Standards AS1235-2000
Not Yet Reviewed
$302.97
—
$567.98
Rhino-Rack USA Heavy-Duty RL150 Roof Racks are the system of choice for vehicles that have protruding side gutters. Easy to install and remove, they're ideal as a non-permanent solution—yet provide great strength and durability. Utilizing tough, heavy-duty aluminum bars, these systems offer you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a traveler, cyclist, surfer or contractor, the RL150 roof rack systems have you covered. They're available in 2, 3, and 4-bar kits for a broad range of specific applications. Additional notes: * Bars are available with a black powdercoat or clear anodized finish * Comes with security hardware * Strong and built to last * Suitable for light off-road use * Tested and approved to meet Australian Standards AS1235-2000
Not Yet Reviewed
$509.96
—
$567.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
