Availability
Showing In Stock Items. Show All 36 Items.
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 314 )
$273.99
Tera Pump offers electric telescopic drum pumps for a variety of drum sizes and fluid applications. They also have different telescoping suction tubes in different lengths. Compare the options and order the model best suited for your pump needs.
Not Yet Reviewed
$309.99
Mr. Gasket electric transfer pumps eliminate the need for hand cranks. They're electrically powered, so just plug one into any 120 V outlet—or you can use the bonus harness with clips for connection to a 12 V battery. The suction pipe telescopes from 33.5 in. to 49 in., allowing one pump to be used on metal or plastic drums from 15 to 55 gallons. These transfer pumps are compatible with ethanol, methanol, DEF, washer fluid, detergent, water based media, agricultural chemicals, and light oils. These electric transfer pumps are not just for getting alcohol fuels into a race car; they can be used at the shop, on the farm, or in the yard. The included discharge hose is 6 1/2 ft. long and has a full control nozzle with easy on/off. Instructions are also included with the electric transfer pump.
( 7 )
$299.95
Weldon 9000 Series fluid transfer pumps are completely rebuildable, self-priming, and have internal components made from 100 percent metal—not plastics or composite. The pumps also feature an internal relief valve to prevent any future system damage. Rated flow for oil is 30 gph at 300 degrees F, while the units draw only 5.5 amps.
Not Yet Reviewed
$453.20
The Tilton transmission and differential oil cooler pumps are ideal for pumping oil through oil coolers. They feature an internal bypass valve and are self-priming up to several feet above the source from which it draws. Tilton cooler pumps are a positive displacement type of pump, so their output is directly proportional to the motor speed. For example, if a lighter load increases the motor speed by 25 percent, then the flow rate increases by 25 percent as well. The Buna cooler pumps are designed for use with standard oils and coolants, while the Viton® models are designed for use with corrosive fluids such as alcohol. Intermittent duty pumps are designed for applications where the pump does not need to be used continuously, such as being turned on/off by the driver or a relay at established temperatures. Order the model for your application needs.
( 22 )
$250.75
K Tool 19.2 V rechargeable drum pumps are great for transferring large quantities of fluids quickly and efficiently. Designed with mobility in mind, they include a rechargeable battery and quick charger, allowing you access to all the power of an electric pump without the limited range of a cord and electrical outlet. The powerful battery is designed to focus on performance with a maximum transfer rate of 28 lpm (7.4 gpm) and endurance with a maximum transfer volume of 410 liters per charge (110 gallons). Key features and benefits: * Drum pump has a compact and lightweight polyacetal body to make it easy to move around, but provides flexibility, tensile strength, and formidable resistance to most chemicals * Designed for use with DEF, diesel, antifreeze, water (please do not use with drinking water), herbicides, pesticides, kerosene, light oils and more; however, drum pump will not effectively work with corrosive substances such as stronger acids or highly viscous liquids such as heavy oils * Telescopic pump tube is equipped with a built-in 2 in. bung but also includes a bung converter for 2.5 in. x 5 in. buttress threads--so you can work with any container from 55-gallon drums to 275 to 330-gallon drums, even plastic drums and IBCs Note: You can use replacement battery (P/N: 72214) Ni Cd 18.5V (peak voltage 19.2 V) or Li Ion 19.2 V (P/N: 73975) battery with this product. Both batteries are compatible. Covered by a 1-year manufacturer warranty.
Not Yet Reviewed
$327.99
Moroso has developed alternator mount kits and drive kits for small and big block Chevrolets using electric water pumps or water pump drive kits. They include all hardware needed to mount old-style Delco alternators to the driver side of the engine, are crankshaft-mounted, and designed with spacers that can be replaced with pulleys to drive other accessories, such as external oil pumps.
Not Yet Reviewed
$298.99
When it comes time to replace your worn-out or failed 4WD differential actuator, look no further than Dorman. These replacement front axle actuators are available in the original vacuum or electric-style, just like OEM. Trust Dorman for the trouble-free engagement of your 4WD system.
( 51 )
$256.99
—
$350.99
John Dow low-profile oil drains offer easier options for oil changes on HD trucks, buses, RVs, and other low-profile heavy-duty equipment. They're available in a variety of materials and capacities—all of which can stand up to the toughest shop conditions. Each oil drain features expanded metal shields to reduce splash and long-reach T-handles that make positioning the drain under your vehicle easier; plus, the handles fold for compact storage. 17 gallon capacity models feature: * Heavy-duty steel—or lightweight polyethylene or polypropylene construction * Steel has 10 in. ground clearance * Polyethylene model has 7 3/4 in. clearance * 6 in. industrial casters on steel drains; front casters swivel, rear are fixed * 4 in. casters on polyethylene * Steel 17 gallon has enclosed reservoir to prevent spillage during transport and includes a gate valve for gravity draining * Polyethylene has recessed drain valve for optimal protection and rib-reinforced reservoir for added support 25 gallon capacity models feature: * Rugged steel construction * 10 in. ground clearance * High-capacity drain for high-volume vehicles * Self-contained 110 V electric pump evacuation system * 10 ft. of quick-disconnect evacuation hose * Reservoir with internal baffles to prevent splashing during transport * 6 in. industrial casters; front casters swivel, rear are fixed
( 2 )
$487.99
Tired of wasting time moving vehicles with a jack and dolly? It's time to GoJak! Their clever Model 6313 self-loading automotive dollies enable vehicles to be jacked up and go mobile quickly and easily—without air, oil, or electricity! The strongest option in GoJak's lineup, these dollies are equipped with steel rollers, wider axles, and two heavy-duty 5 in. and two 4 in. diameter double-ball raceway casters. It's a combination that makes rolling heavier loads (up to 6,300 lbs.) much easier. The 6313 models feature a 5 degree offset foot pedal for additional foot-to-tire clearance, plus additional frame clearance, which can be very useful when pulling cars up onto flatbed trucks. The dollies are available in right hand and left hand jacks, or a pair packaged together. No shop should be without this incredible equipment. Move cars by yourself, effortlessly, with GoJak 6313 dollies—the faster caster system.
( 97 )
$278.99
—
$442.99
MSD Pro-Billet distributor plugs with cam sync are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a Hall-effect cam sync signal needed for the EFI system to reference the #1 cylinder. For wet sump applications, the plug also drives the oil pump. MSD cam syncs are plug-and-play with Holley EFI systems, and can easily interface with most aftermarket EFI systems. MSD cam sync plugs feature: * Built-in LED makes set-up and indexing quick and easy * Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal * CNC-machined billet housing with black anodized cap provides good looks and excellent durability * Available with cast melonized, steel, or bronze distributor gear, depending on the application * Chevrolet version is supplied with an adjustable slip collar for blocks with a non-standard deck height
( 8 )
$349.95
—
$435.95
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$482.95
GoJak Model 6520 wheel dollies enable you to jack up and move your vehicle around the shop or other venues—without air, oil, or electricity. They are rated to handle up to 1,625 lbs. per wheel, or a 6,500 lb. max vehicle load. The dollies can accommodate up to 20 in. tire tread widths (racing slicks or performance tires). The strongest model in GoJak's lineup, these dollies are equipped with steel rollers, wider axles, and two heavy-duty double-ball raceway casters—a combination that makes rolling heavier loads much easier.
( 3 )
$387.99
Schaeffer's Ultra Red Supreme is a multi-purpose, extra tacky, aluminum complex, waterproof grease made from severely hydrotreated polyalphaolefin (PAO) synthetic base fluids and a high viscosity index solvent refined, severely hydro-finished 100 percent paraffin base oils. Designed for durability, Ultra Supreme withstands the demands of heavy-duty automotive, industrial, and off-road equipment. Ultra Red Supreme quickly plates to metal surfaces, offering solid, reliable protection that lasts longer than conventional greases. During periods of excessive pressure, increased heat and high-shock loads, this grease resists breaking down and shields bearings from wear and tear. Fortified with moly, which allows the grease to act as a backstop, Ultra Red Supreme significantly reduces friction, which reduces wear and contact area temperature. This in turn leads to increased equipment life, less downtime, and extended lubrication cycles. Ultra Red Supreme is red grease for use where a clean grease is needed. It is not recommended for use in passenger car automotive wheel bearings and electric motor bearings. Performance benefits: * Waterproof grease resists emulsifying, washing out and spraying off when exposed to moisture * 100 percent reversibility; grease retains consistency during intense pressure and severe mechanical action * Excellent shear and mechanical stability: grease stays in place, resists separating and running off components * Increased oxidation stability * Withstands pressures up to 500,000 psi, while protecting against wear * High dropping point * Protects against rust and corrosion * Excellent pump-ability and flow-ability in low temperatures
Not Yet Reviewed
$251.91
Homak parts washers are ideal tools for getting grease and oils off of parts. These sturdy units feature 1.5mm thick legs with a 1.0mm frame for strength and rigidity, large one-piece tanks, a flexible nozzle, and work surface trays. An on/off switch is included with the electric pump, while injuries from fire are reduced thanks to a fusible linked lid arm. Clean parts without all the mess using Homak parts washers.
Not Yet Reviewed
$359.99
—
$387.99
Tired of lifting each wheel with a floor jack to insert a dolly? You need to GoJak! These self-loading automotive dollies roll up to your tire—and let you jack and go without air, without oil, without electricity! The workhorse in GoJak's lineup, Model 5000 features four heavy-duty 4 in. diameter double-ball raceway casters and uses a bi-directional linear ratchet for the jack portion. It is a proven and reliable product that can accommodate a large percentage of passenger cars and small trucks. Move, store, or position show cars or disabled cars effortlessly—even in confined spaces—with a GoJak Model 5000 self-loading dolly … the faster caster system. (Also available in a left-handed model.)
( 18 )
$262.99
Painless Performance 28-circuit universal harnesses include most of the power accessory circuits you have been looking to add to your vehicle. The versatility of these harnesses will allow them to be easily adapted to almost any vehicle. The GM column-mounted harnesses include ignition switch plugs and turn signal switch plugs, pre-terminated and ready to install. They also have pre-wired plugs for the headlights and dimmer switch. The dash mounted units do not include the GM column-mounted ignition switch plugs, but do include the GM column-mounted turn signal switch plugs and terminals. Each harness includes circuits for: * Air conditioning/heat * Accessory * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers
( 74 )
$339.99
—
$365.99
Painless Performance 28-circuit universal GM truck harnesses can be used in just about any pickup where basic-or-more wiring is needed. Ample wire lengths make these kits especially suited for everything, including long beds and extra cabs. GM column-mounted kits include GM (column-mounted) ignition switch plugs and the GM (column-mounted) turn signal switch plugs pre-terminated and ready to install. Painless Performance 28-circuit universal truck harnesses use GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory * Backup lights * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers
( 15 )
$395.99
Painless Performance 28-circuit universal muscle car harnesses are a perfect solution to your wiring needs. They are designed to fit 1960s, 70s, or 80s GM, Ford, and Chrysler muscle cars where a bulkhead connector is required. These harnesses use the highest quality thermal-crossed linked (TXL) polyethylene wire rated to 275 degrees at 600 V--twice the voltage load of standard GPT wire. That's power on demand! Some minor bulkhead modification may be required. Please be sure to check the fitment of this harness, as there may be a more direct fit harness available for your vehicle. Includes circuits for: * Air conditioning/heat * Accessory * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers
( 3 )
$539.99
If you want to keep your race car streetable and want to use all of your factory switches instead of a switch panel, Painless Performance 21-circuit Pro Street chassis harnesses are for you. Each wire is labeled and is pre-terminated at the fuse block for easy installation. They also include an optional connector if you want to use a GM column mounted ignition switch. Also, with each harness is a terminal assortment kit, with the necessary connectors for your turn signal switch, headlights, and alternator. Each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 * Accessory #2 * Brake Lights * Charging * Dome light * Electric fuel pump #1 * Electric fuel pump #2 * Electric water pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Park lights * Radio and gauges B+ * Starting * Taillights * Third brake light * Turn signals * Wipers
( 6 )
$327.99
The Ranger E1.2B3F1 hydraulic power units are a compact tank that offers enough juice to lift a 10,000-lb. truck or SUV. The 1.5 hp motor is powerful enough to handle lifting applications on all of Ranger's low-rise lifts, as well as some of their full-sized lifts. Plus, the single-phase, 50/60 Hz design is super-efficient; when used on a low-rise car lift, your car will be lifted to the lift's max capacity in just 30 seconds. The crowning achievement of the E1.2B3F1's design is the fixed-volume hydraulic circuit with an optimized pressure-sensitive relief valve. When the system pressure exceeds 2,500 psi, the valve opens and allows fluid to bypass rapidly and safely. The valve automatically closes when the pressure levels return to normal. A hydraulic power unit with an optimized relief valve is essential for shops that need to operate heavy loads worry-free. Don't let the lighter tank on the Ranger E1.2B3F1 fool you into thinking this hydraulic power unit is weak. In fact, many prefer smaller tank sizes for one simple reason—they get the job done safely and very efficiently. Features and specifications: * Pumps feature high mechanical and volumetric efficiency, low noise level * End head prepared for lift-hold-lower applications using our standard manual lowering valve or solenoid cartridge valves * Totally enclosed motors are suitable for use in humid environments or dusty, contaminated atmospheres—UL Recognized and CSA Certified * AC electric motors feature heavy-gauge steel frame and base and high-quality ball bearings * Torque load remains constant throughout the range of operation * Power up, gravity down function * Heavy-duty start switches with a high IP-protection class and silver-plated contacts meet tough demands for a long service life * Cartridge-style relief valves meet tough demands for dependability and life expectancy * Equipped with black plastic and steel reservoirs * Vertical mounting * Equipped with oil level dipstick * High performance cartridge check valve is standard * Most premium grade petroleum-based fluids can be used—optimum operating viscosity range is 15-68 centistokes * Minimum recommended temp is -25 degrees C (-1 degrees F) * Maximum recommended temp is +80 degrees C (+175 degrees F)
Not Yet Reviewed
$525.00
ATI Super Damper Serpentine Series harmonic balancers are patented and feature grooves for serpentine belts machined into the outer damper shell. The dampers come with six outer grooves for standard OEM drive systems—but eight and 10 grooves are available for supercharger or turbo applications. Serpentine dampers are offered in a variety of diameters, and crank hubs may be fitted with a 6-groove serpentine pulley to drive external oil pumps or vehicle accessories. The Serpentine Series Super Dampers fit all ATI GM-front crank hubs and can be adapted to many engine combinations, providing maximum flexibility. They're available in steel or lightweight, hardcoated aluminum. Features and benefits: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * Tunable, rebuildable, and extremely efficient at all rpms * Laser-engraved 360 degree timing marks
( 237 )
$412.70
Compressors are the heart of the A/C system, having a heavy responsibility to pump refrigerant throughout your automobile's air conditioning system. That's why UAC takes the upmost care when developing new compressors. Universal Air Conditioner carries a vast line of compressor kits to cover whatever application you need. Their compressors meet exact OE specifications and are manufactured at a Tier 1 facility, providing you with a high-quality product at price that is very affordable. Included in their compressor replacement kits is the compressor, accumulator/drier, expansion valve, a Rapid Seal O-ring kit, and premium synthetic R134a lubricant oil. Kits are available with or without a condenser. Each Universal Air Conditioner compressor kit will contain the correct component styles specific to the vehicle. Take advantage of UAC's unbeatable quality and restore the cool in your vehicle; choose the kit designed for your vehicle.
( 27 )
$251.99
—
$450.99
Gain serious firepower with GM Street/Strip D.U.I. distributors from Performance Distributors. These fire sticks have everything you need for your ignition in one simple, but strong unit. They offer an easy, one-wire hookup--no external coils or spark boxes, just one 12 V hot wire hookup for 50,000 V of pure spark energy and a cleaner, crisper, more powerful-running engine. Their Dyna-Module, along with the high-voltage coil, allows spark plug gaps to be opened up, increased dwell for longer-duration spark, and the most complete combustion of your fuel mixture for increased horsepower and torque. Plus, the caps have brass terminals for optimum conductivity and are available in several colors, including clear, so you can see the firepower at work. Feel the power; experience Performance Distributors GM Street/Strip D.U.I. distributors.
( 143 )
$459.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
