Availability
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1972 )
$699.95
$255.55
—
$454.95
On Sale
MSD Race Tailored Super Conductor sleeved spark plug wire sets are equipped for the harshest race conditions. These ultimate performance 8.5mm wires combine extremely low resistance with the ability to suppress electromagnetic interference. They now come outfitted with high-temperature, silicone-fiberglass sleeving that protects wires up to 1,000 degrees F! MSD offers their Race Tailored Super Conductors with socket-type or HEI ends for routing under exhaust or over valve covers. Order the set recommended for your vehicle and engine application.
( 13 )
$261.95
On Sale
MSD 8.5mm Super Conductor wire has a special helically wound core that has just 40 to 50 ohms of resistance per foot--but with the RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 ft. of tightly wound copper for superior conductivity. A tough 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs.
( 30 )
$349.95
$314.95
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 131 )
$330.95
$297.85
—
$435.95
On Sale
MSD Hemi tubes are molded from Rynite for incredible strength and high-spark isolation properties. For easy assembly and disassembly, MSD has incorporated a new twist-lock cap at the base.
( 3 )
$262.95
On Sale
MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.
( 20 )
$526.95
$359.95
—
$499.95
On Sale
MSD single-channel ignition testers allow you to check the entire ignition system while it is in the car. Once the ignition tests good, you can continue troubleshooting and find the culprit. The testing units produce a simulated trigger signal that fires the ignition just as if the engine were running. A special load-producing, clip-on spark plug is included to connect to the coil wire. If the spark is unable to jump the gap of the tester, there is an ignition problem and you can trace it down. The testers operate on 4, 6, or 8-cylinder engines and will simulate up to 10,000 rpm.
( 9 )
$499.95
$448.95
On Sale
MSD Digital 6 off-road ignition controllers deliver a fully potted design that provides the ruggedness and reliability needed to get your 4WD to any destination. These units multi-spark below 3,000 rpm on V8s—ensuring clean, crisp throttle response and complete fuel burn when crawling at low speeds. Above 3,000 rpm, a powerful capacitive discharge spark keeps the fire lit until you let off the skinny pedal. The smooth, accurate rev-limiter will protect your engine from over-rev damage due to drivetrain failure or a slick spot on the trail. Whether you're crawling rocks, high-speed desert racing, or playing in any kind of harsh terrain, your off-road rig can benefit from an MSD Digital 6 off-road ignition controller. Features include: * MSD's smoothest rev limiter yet! Easy on your engine * Fully potted design provides reliability even in high-vibration and wet circumstances * Large, easy-to-read LED display * Simple setup of features, such as the rev limiter, with three rotary dials on the face of the unit * Built-in Start Retard adjustable in 0, 10, or 20 degree increments for quick, easy starts and extended starter life * LED displays rev limit, highest RPM turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Rugged housing to stand up to demanding off-road and race conditions * Single plug-in connector for clean wiring * Works on 4, 6, and 8-cylinder engines * Reverse polarity and overheat protection provide ultimate reliability
( 7 )
$549.95
$493.95
On Sale
These MSD 6TN and 6ALN ignitions are the ultimate choices for superior performance in harsh racing conditions. With sturdy vibration mounts and CD circuits encased in a clear 2-part silicone elastomer, they are virtually vibration-proof. A specially designed, weathertight, 6-pin connector meets NASCAR's 20-6.1 ignition wiring rule and provides a tight, positive-locking connection with individual seals to keep dirt and moisture from each connection. The 6TNs are equipped with a special 4-pin connector that plugs directly into an MSD soft touch rev control, while the 6ALNs have a built-in rev control. These rev controls are adjustable with plug-in modules and will save your engine from overrev damage caused by missed shifts or driveline failures. They'll work with virtually any 4, 6 (even-fire V6 only), or 8-cylinder engines.
( 6 )
$522.95
$469.95
On Sale
Small but potent, MSD Atomic EFI TBI power modules handle the high current loads! The modules supply power to the fuel pump (no need for an external relay), and they have two activation wires so you can set temperatures for dual electric cooling fans. The Atomic TBI power modules easily plug into the throttle body-mounted engine control unit with a single, clean connection--thanks to MSD's CAN-Bus technology. Then, simply plug in the handheld monitor and you're ready to go! The right modules supply the right power … Atomic power for your MSD EFI TBI systems.
( 1 )
$549.95
$493.95
On Sale
MSD Digital 6CT ignition controllers are hardcore ignitions that work as hard as you do at the track. Their superior design is packed with a slew of features, including a large, easy-to-read LED display and a simple setup utilizing three rotatory dials. MSD Digital 6CT ignition controllers offer the smoothest performance ever that comes in a fully potted, tamper-proof housing that uses a single connector to keep wiring tidy. MSD Digital 6CT ignition controllers feature: * Built-in start retard adjustable in 0, 10, or 20-degree increments for quick, easy starts and extended starter life * LED displays rev limit, highest rpm turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Single plug-in connector for clean wiring * Tamper-proof screws to prevent modification of unit * Records highest rpm the engine turned for last 20 minutes of run time * Works on 4, 6, and 8-cylinder engines * Reverse polarity and overheat protection provide ultimate reliability
( 4 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
MSD Cap-A-Dapts have HEI-style posts, an adjustable rotor to allow proper phasing (Chevy and Mallory YL only), and wider post spacing to prevent crossfire and ionization. The kits include a high-quality cap with brass terminals, a rotor, and a cap spacer.
( 44 )
$320.95
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$299.95
$269.95
—
$330.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
