Availability
Showing In Stock Items. Show All 26 Items.
Advance with the digital power of your popular favorite--MSD 6AL ignitions. With less power draw and higher output, MSD moves you with "the fire to drive" in a digital powerhouse! Inside microprocessors, updated circuits and efficient components monitor and handle every firing and rev limit to produce more power while pulling less current. Don't worry; features that made their 6AL boxes your first choice remain but with improved output--more than135mJ of spark energy for every firing with 530+ volts to the coil! And, to go with the new power, a new look. These digital 6AL ignition controllers are sleek with a lower profile. Wiring is routed out one end through a sealed and locked connector and two rotary dials to set rpm limit are positioned right on top--easier installation, super easy access and a clean, neat appearance under the hood. Controllers are supplied with wiring harness and components you need for install plus, vibration mounts. Increased output and proven multiple-spark power--MSD digital 6AL ignition controllers are a definite win-win!
( 425 )
$339.95
—
$344.95
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 328 )
$649.95
$357.95
—
$499.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 239 )
$641.95
$302.21
—
$499.95
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 640 )
$499.95
$276.95
—
$513.95
MSD engineers drew upon their experience with Top Fuel cars and created these new HVC-2 coils for use with the MSD 6 Series Ignition Controls. These coils utilize an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 and wound specifically to create an effective coil with incredible voltage capabilities, lightning quick rise time, and lengthy spark duration. The housing, also molded from Rynite material, features far-spaced brass primary terminals and a well-protected secondary tower for increased spark isolation. The housing is completely potted with an epoxy compound for vibration resistance and installs with sturdy vibration mounts. They're designed for use with MSD 6 Series ignitions.
( 52 )
$349.95
MSD is excited to announce the next generation of 6-Series ignition controls--the 6AL-2! These all-new ignition controls combine a new housing, new digital controls, and more power in a sleek package. You still receive the 20 degree duration of multiple sparks, combined with higher output to ensure complete combustion. There is a 2-Step rev control built into the housing, but there are no rpm modules! Adjustments are made via four rotary dials for 100 rpm increment control! The all-new capacitive discharge ignition will easily connect to nearly any 12 V negative ground distributor system, even Hall-effect pickups. They offer higher output, with up to 135mJ and 535 V, and accept points and mag pickup triggers.
( 95 )
$449.95
MSD HVC III coils utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material, which has incredible dielectric capabilities at high temperatures. MSD also incorporated a cutting-edge winding material that has improved insulation and is also capable of enduring extreme voltages. Together, these materials create a durable coil with incredible voltage capabilities, lightning-quick rise time, and longer spark duration. The MSD HVC-3 coils are equipped with an industry-first third terminal to allow secondary current sensing, for each spark, when used in conjunction with the MSD 8001 Pro 600 Single Channel ignition. Product details: * Designed for racing applications with an MSD 7 or 8 Series ignition control or Pro 600 single channel * New U-Core winding design produces more voltage and current * 70:1 turns ratio and lower primary resistant compound for vibration resistance * Windings are encased in fracture resistant compound for vibration resistance * Dupont Rynite housing with isolated tower and brass primary terminals * Supplied with mounting hardware and rubber shock mounts * Built-in current sensing (when used in conjunction with MSD Pro 600 single channel)
( 1 )
$349.95
—
$381.95
MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.
( 92 )
$499.95
—
$525.95
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 51 )
$699.95
$384.95
—
$524.95
MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.
( 20 )
$399.95
—
$526.95
MSD HVC-2 coils utilize an iron U-core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material. That means it has incredible dielectric capabilities at high temperatures. The housing features far-spaced brass primary terminals, and a well-protected secondary tower for increased spark isolation. HVC-2 coils are designed for use with MSD 7 Series ignitions.
( 28 )
$334.95
—
$364.95
Change your vehicle's ignition timing without leaving the driver's seat with one of these MSD adjustable timing controls. They're designed to fit virtually all vehicles with a 12 V negative-ground ignition, a distributor, and an externally mounted coil. They feature a knob that mounts to the dash for easy and accurate timing adjustments, allowing you to adjust timing up to 15 degrees to compensate for bad gas, altitude changes, and heavy loads.
( 18 )
$299.95
These MSD 6TN and 6ALN ignitions are the ultimate choices for superior performance in harsh racing conditions. With sturdy vibration mounts and CD circuits encased in a clear 2-part silicone elastomer, they are virtually vibration-proof. A specially designed, weathertight, 6-pin connector meets NASCAR's 20-6.1 ignition wiring rule and provides a tight, positive-locking connection with individual seals to keep dirt and moisture from each connection. The 6TNs are equipped with a special 4-pin connector that plugs directly into an MSD soft touch rev control, while the 6ALNs have a built-in rev control. These rev controls are adjustable with plug-in modules and will save your engine from overrev damage caused by missed shifts or driveline failures. They'll work with virtually any 4, 6 (even-fire V6 only), or 8-cylinder engines.
( 6 )
$522.95
On Sale
MSD Atomic EFI billet fuel rails are the perfect complement for your Atomic AirForce intake manifold. Whether you're looking for just rails, or complete kits with all the necessary plumbing--these fuel rails will have you looking for any excuse to pop the hood. They feature a bright dip, black anodized finish with laser-etched logos and a 5/8 in. diameter fuel passage flow capacity for high-horsepower applications. Make your engine look as good as it performs with MSD Atomic EFI fuel rails. Features, specs, and parts may include: * Fuel rails are machined to accept large -8 (3/4 in.-16) O-ring fittings * Includes mounting brackets and hardware * Includes four -6 to 3/4 in.-16 O-ring adapters
( 1 )
$368.95
—
$399.95
On Sale
Get your race car going faster with MSD DynaForce high-speed starters! With 25 percent more cranking speed and extreme durability, they will reliably start your stubborn race engine. Designed for engines requiring higher cranking rpm to start, these starters offer 3.73:1 gear reduction. They also feature a heavy-duty, high-temp solenoid for 12 to 16 V systems, a plated disc and contacts to reduce arcing, and an adjustable billet aluminum mounting block. When you need higher cranking speed at the track for your blown alcohol engine or magneto ignition, MSD DynaForce high-speed starters will get you movin'--fast!
( 12 )
$749.95
$412.95
MSD replacement crank trigger wheels are designed to fit the flying wheel crank trigger kits from MSD. They include four magnets and mounting instructions. These aluminum wheels are available in different diameters for big block and small block harmonic damper applications, in red or black anodized finishes. Order the model recommended for your vehicle.
( 3 )
$316.95
—
$368.95
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$368.95
On Sale
These Pro-Billet dual pickup distributors from MSD are specifically designed for Circle Track racing. Not only do they feature a strong, CNC-machined billet 6061-T6 aluminum housing and a large steel shaft, but they also feature two magnetic pickups for a complete redundant ignition system that can be activated at the flip of a switch. The pickups are triggered as a precision reluctor, mounted to the oversized shaft, spins past. The pickups are placed precisely 180 degrees apart so that when you switch to the secondary ignition, the timing remains constant. Guiding the distributor shaft is the responsibility of two sealed ball bearings for incredible endurance and high-end stability. The shaft also receives a QPQ coating for corrosion resistance and friction reduction. Additional features include a fully adjustable mechanical advance consisting of a hardened advance cam, chromoly weights, and weight pins that are TIG-welded to the advance plate. The entire assembly is welded to the polished steel. The advance assembly can also be easily locked out for quick tuning changes. The Chevrolet model features two O-ring grooves at the base of the CNC-machined housing to prevent oil in the lifter valley from leaking through the oil passage. If the engine deck, heads, or intake have been modified, there is an adjustable slip collar that allows you to set the correct installation depth. All dual pickup distributors include a cap and rotor.
Not Yet Reviewed
$649.95
$357.95
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1950 )
$699.95
$276.95
—
$454.95
MSD Street Fire EFI distributors are ready to drop in your V8 engine and replace the worn-out OEM piece. They feature a factory-style ignition module, along with a durable new cap and rotor. The distributors use a cast housing, making them more affordable, but are much stronger than standard OEM distributors. The MSD Street Fire EFI distributors are available for both Ford and Chevy EFI engines.
( 26 )
$381.95
On Sale
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 115 )
$525.95
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$849.95
$399.95
—
$523.95
Trick Flow® crank trigger distributors get the juice flowing for your valve cover mounted ignition system. Specifically designed for use with Trick Flow® Twisted Wedge® and Twisted Wedge Track Heat® cylinder heads for the 4.6L 2V valve cover mount ignition system, these distributors are driven off of the driver's side camshaft. The Trick Flow®/MSD crank trigger distributors are CNC-machined from billet aluminum and offer accurate timing for your next race.
Not Yet Reviewed
$335.99
Trick Flow® dual pickup distributors get the juice flowing for your valve cover mounted ignition system. Specifically designed for use with Trick Flow® Twisted Wedge® and Twisted Wedge Track Heat® cylinder heads for the 4.6L 2V valve cover mount ignition system, these dual pickup distributors are driven off of the driver side camshaft. The Trick Flow®/MSD dual pickup distributors are CNC-machined from billet aluminum and feature two magnetic pickups.
Not Yet Reviewed
$456.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
