Free Shipping on Orders Over $109 at Summit Racing

Speedhut SPEEDBOX

Speedhut's SPEEDBOX is the ultimate solution for effortlessly upgrading your cable-driven mechanical speedometer. Supporting GPS and modern transmission signals, it's the simplest and most versatile speedometer conversion for any vehicle. Requiring only 12-volts and ground, this unit offers a hassle-free plug-n-play solution that eliminates the need for tedious calibration or subscription services. With a drive output thread of 7/8 in.-18 and a square of 0.112 inches, the SPEEDBOX offers flexibility, and its calibration range from 170-1,650 turns per mile ensures precision for diverse speedometers. The versatile design of the box can be efficiently installed in the dashboard or under the hood. Default calibrated for US speedometers at 1,000 turns per mile—the box adapts effortlessly to signals from GPS or VSS automatically calibrating with the included GPS antenna. Speedhut SPEEDBOX is available with or without the cable (please specify your needed requirements when placing order). Quick Product Overview: * Requires only 12-volts and ground * Plug-n-Play installation * Drive Output Thread is 7/8 in.-18 * Drive Output Square is 0.112 in. * Can be calibrated to 170-1,650 turns/mile * Default calibrated for US speedometers @ 1,000 turns/mile Drive your mechanical speedometer using any of the following signals: -- GPS (automatically calibrates using the included GPS antenna) -- VSS (Vehicle Speed Sensor)

5.0 out of 5 stars ( 4 )

$370.66

—

$411.27

Dakota Digital Electronic Signal to Mechanical Cable Drive Adapters

Dakota Digital presents the missing link between your cable-driven speedometer and late model electronic transmission! Measuring 5 1/2 in. x 3 1/2 in. x 2 in., these adapters allow a mechanical-cable speedometer to be used in conjunction with a modern drivetrain which provides only an electronic output. The units use PID control of the cable speed to provide quick, smooth operation, as well as prevent overdriving or damage to the speedometer needle. Consider these adapters as the most precise and easiest to use cable-drive units on the market. Additional features of Dakota Digital electronic signal to mechanical cable drive adapters: * 36 in. cable available for GM thread-on, GM clip-on, and Ford clip-on style speedometers (select preferred model) * Powerful motor is quiet enough to mount the module inside the cabin * Waterproof case can also be mounted under the hood, or even inside a fenderwell * Bluetooth-enabled to sync with available mobile app for stone-simple set up * Supplied programming switch and LED readout make setup easy * For OBD-II equipped vehicles; the supplied pigtail will easily plug into the DLC, simplifying the wiring connections

4.82 out of 5 stars ( 17 )

$380.00

On Sale

XS Power XP Flex Power Cables

These XS Power XP flex power cables offer you extreme performance. They feature a 10 percent oxygen-free, copper-clad aluminum cable with a 5,250-strand count, which exceeds the industry cabling standards and makes them true AWG cables. They are also super-flexible and easy to use in any installation. If you've bought an XS Power battery or charger before, then you already know that XS Power will bring you the highest quality cables on the market with these XP flex power cables.

4.5 out of 5 stars ( 6 )

$279.99

$251.99

Bowler Performance Tru-Shift Throttle Correction Systems

Are you tired of the trial and error method of adjusting your TV cable on your 700-R4 and 200-4R transmission? Bowler Performance Tru-Shift throttle correction systems will solve your problems. These are the easiest and best functioning TV cable adjusting systems available, and they are easy to install. Simply bolt on the supplied bracket and carburetor cam assembly, install the Bowler TV cable, then run the accelerator to wide open throttle. The cable will automatically adjust itself and you're done. With Bowler Performance Tru-Shift systems there is no need to remove the carburetor, adjust cams, drop the transmission pan, or install a pressure gauge to check the pressures, but best of all—there isn't any more guessing. Bowler even includes different throttle cable brackets to cover Lokar, Gennie, GM square, and early round hole styles. Each one attaches neatly to the supplied bracket. Choose the kit designed for your carburetor.

4.75 out of 5 stars ( 4 )

$312.99

—

$314.99

Warn Spydura Synthetic Winch Ropes

Warn Spydura Synthetic winch rope is constructed of a unique high molecular weight polyethylene material and offers high abrasion resistance and tremendous tensile strength. Spydura synthetic rope is coated with high temperature urethane for increased UV and chemical resistance. The rope also features a temperature resistant sleeve on the first layer as well as a ballistic nylon sliding sleeve that provides extreme protection against wear and abrasion. The unique self-tightening rope attachment is designed to hold the rope secure on the winch drum and makes the Spydura winch rope ideal for pushing the limits on the trail. Warn Spydura Synthetic rope winch rope is designed for winches with 10,000 lb. pull rating or less.

Not Yet Reviewed

$414.99

—

$460.99

Summit Racing™ Throttle Cable and Kickdown Cable Pro Packs

These Summit Racing™ throttle cable and kickdown cable Pro Packs have been put together to save you time and money when installing a throttle cable. They include a new Lokar braided stainless steel throttle cable, a throttle cable bracket, and a return spring, and they are also available with an automatic transmission kickdown cable. Don't worry--whether you're working on a Ford, GM, or Mopar, we will have you covered with one of these Summit Racing™ throttle cable and kickdown cable Pro Packs.

4.81 out of 5 stars ( 42 )

$262.85

—

$430.47

Taylor Battery Cables

When resistance gets tough, the tough get Taylor battery cables. These 1-gauge cables are made from 980 strands of premium 30-gauge copper wire to deliver more cranking power with less voltage drop than most battery cables. They feature crimped tin plated brass post terminals that are less corrosive and three times more conducive than lead. Copper ring terminals for starter and ground connections are included, along with P-clip cable mounts and shrink sleeve tubing for a professional finish.

4.87 out of 5 stars ( 23 )

$257.25

—

$266.25

Scott Drake Clutch Cable Kits

If hard shifting and minor gear grinding have you worried about a complete transmission rebuild, relax—Scott Drake clutch cable kits might be all you need to resolve the problem. With these kits, there's no need to remove the clutch pedal; simply install the adjustable bracket that bolts to the pedal, along with a firewall support plate and "tool free" cable adjuster. No welding is needed; Scott Drake clutch cable kits also require less maintenance and are easier to install than hydraulic systems

4.33 out of 5 stars ( 9 )

$382.95

—

$460.95

Lokar Throttle Cable Brackets

Lokar throttle cable brackets provide a performance-grade mounting option to match your fuel system. They're offered in a wide range of designs and finishes to assure proper fit, form, and function. The brackets are offered as individual components, or in kits with as little/much as you need. They're available in universal or application-specific options.

4.56 out of 5 stars ( 490 )

$257.95

Hybrid Racing Performance Shifter Cables

Hybrid Racing offers shifter cables for a variety of applications, including many Honda© and Acura© models. They're a performance upgrade replacement for OEM cables. The solid rod ends and spherical bearings give these cables a firmer, tighter feel over stock cables, resulting in fewer missed shifts and a more connected feel to the chassis. Hybrid cables deliver peace of mind and improved driving performance—even when shifting hard or during demanding racing scenarios. Other notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (OEM are plastic and known to break on the factory cables). All of the rod ends and mounting bushings are CNC-machined 6061 aluminum that have been heat-treated and hard-anodized black before being laser-etched with the Hybrid Racing logo and flair. Aside from two shifter cables, each set includes cotter pins, and other components relevant to your application. Select the kit designed for your vehicle.

Not Yet Reviewed

$378.09

—

$398.99

Lokar Throttle Plate & Spring Return Bracket System I

Lokar throttle plate and spring return bracket systems are designed for Morse-style cables and/or a single-cylinder throttle stop. These Lokar throttle bracket systems feature two stainless steel return springs with dual wound ends for safety (eliminates single-hook ends opening up), an adjustable-angle throttle cable mount for obtaining the correct angle and creating less strain on the throttle cable, and an adjustable spring tensioner. When you're using a throttle stop, this clever design allows the cylinder to hang below and remain in-line, eliminating typical top mount "flopping." These Lokar throttle bracket systems are also drilled for the included stainless scoop tray studs.

5.0 out of 5 stars ( 1 )

$353.95

MustangSteve Clutch Cable Conversion Kits

MustangSteve's cable clutch conversion kits will make your classic feel like a modern car with a smoothly operating clutch. The conversion kits will allow you to modify your clutch pedal to a later model type quadrant setup for use in installation of a cable operated clutch, especially useful when installing a late model T-5 or Tremec manual transmission. Yes, it takes a bit more effort to install this conversion, but you already know that the easiest stuff is seldom the best. This setup requires you to remove the clutch pedal and pedal support for installation of the quadrant. You will need to take the pedal out to replace bushings and get rid of those big springs anyway when converting to cable operation. But you will be rewarded by enjoying years of trouble-free service, as well as simple cable replacement access should you ever need to replace the cable. Unlike any other aftermarket cable clutch conversion, this fully welded quadrant kit offers several advantages: * Welding the quadrant to the stock clutch pedal will never allow it to come loose from constant use * No under designed clevis or other small parts to wear out or break (cable attachment points) * Pulls the cable with a constant radius, unlike the single lever type—keeps cable pulling straight from cable housing * Transfers forces to the cable directly in line with the clutch pedal—no twisting motion to bend the arm * A whole lot cheaper to install, the do-it-yourselfer can build it for the price of a quadrant, plus the cost of a new cable * Fits with the MustangSteve power brake conversion * Fits with MustangSteve ball bearing clutch pedal shaft conversion * Virtually eliminates clutch chatter caused by loose clutch actuation linkage Info for using this conversion kit with a Toploader or T10 Transmission: The quadrant kits are designed to be used with a T-5 or Tremec conversion and a cable clutch. If you want to use the cable clutch with an original Mustang standard transmission, you will have to do a little fabrication. In order to make the cable clutch work with the original type bellhousing, you must install a cable type release arm and a new pivot bolt (fulcrum) in the bellhousing. You'll need a Mr. Gasket replacement fulcrum bolt and a Ford release arm from a 1987-1993 5.0 Mustang originally equipped with a T5. The aluminum plate will need to be welded into the bellhousing and then you will need to thread a 1/2 in. hole in the plate for the new fulcrum bolt. You will also need to fabricate a cable housing stop to go outside the bellhousing.

Not Yet Reviewed

$263.99

—

$267.99

Classic Instruments Speedbox 2.0 Speedometer Interfaces

Classic Instruments Speedbox 2.0 speedometer interfaces are the ultimate solutions for effortlessly upgrading your cable-driven mechanical speedometer. They are designed to operate a cable-driven mechanical speedometer using an electric speed signal from GPS, CAN-bus speed data through the OBD-II, or vehicle speed sensor (VSS). Assembled with high-quality components, each CI SpeedBox 2.0 interface requires only a 12 V and ground for a hassle-free, plug-n-play install that eliminates the need for tedious calibration or subscription services. Features: * Fits Ford, GM, and Chrysler speedometers only * Easy plug-and-play connections to make the conversion painless * Can retain factory speedometer look for specific barrel type speedos * Can be installed in the dash or under the hood, but is not waterproof * Converts cable-driven mechanical speedometers to support electronic inputs

Not Yet Reviewed

$460.95

The Right Stuff Parking Brake Cables

The Right Stuff produces some of the best fitting, most exact reproduction brake lines available in today's market. They use CNC benders, laser measuring, and automated end-forming that flares lines with incredible accuracy, so you know you'll be able to trust these parking brake cables manufactured by The Right Stuff. Their cables are available in quality steel or strong stainless steel for corrosion resistance and unfailing reliability. From single lines to complete kits, The Right Stuff replacement cables are available for fitment in numerous emergency brake locations on countless makes and models.

4.62 out of 5 stars ( 61 )

$251.99

—

$304.99

Smittybilt Spectra Synthetic Winch Ropes

Your winch rope is a wearable item, yet extremely vital piece of your rig and needs to be replaced over time. Kink, fray, and other visible wear are signs that it's time to replace your winch rope. Smittybilt Spectra synthetic winch ropes are replacements for safe, easy trail recovery. They are strong and made to last with100 percent Spectra engineered fiber, and they are tested under the toughest conditions so that you can be confident out on the trail. Smittybilt Spectra synthetic winch ropes are available in 8,000, 10,000, 12,000, and 15,000 lb. weight ratings, providing options for a variety of uses and applications. Additional features: * Reinforced stainless steel thimble for added strength and resistance to the elements * 16 ft. heat-resistant braided sleeve protecting rope from abrasion and heat * Red braided sleeve provides visual indicator of the last 16 ft. of rope * 4 1/4 ft. durable polyester sliding sleeve on hook end for improved abrasion resistance and wear protection * Removable clevis hook for quick accessory changes * Compatible with most winch applications

Not Yet Reviewed

$359.99

—

$399.99

Lokar Floor Mount Emergency Brake Cables

Lokar floor mount emergency brake cables are designed for use with Lokar's floor mount emergency hand brakes. The kits come equipped with quality one-piece aluminum adjusters and aluminum ferrules. Available in numerous lengths for dozens of axle models, these parking brake cables are cut-to-fit with a PTFE-lined outer housing for smooth operation, and the stainless inner cable resists moisture.

4.87 out of 5 stars ( 111 )

$333.95

Klein Tools Communications Cable Cutters

Klein's communication cable cutters are lightweight, yet efficient shear-type tools. They're designed to cut up to 900-pair soft copper and aluminum cable, as well as lead or rubber-covered communications cable. Forged steel jaws make a clean, even cut for ease in fitting lugs and terminals. Additional details: * Replaceable hook-jaw blades grab and hold cable while shear-cutting action makes clean cuts * Exceptionally strong fiberglass handles with heavy vinyl grips for comfort and slip resistance * Heavy-duty pins in head serve as blade-stops * Jaws are forged tool steel with black oxide finish for long life * Not designed for cutting steel or ACSR

Not Yet Reviewed

$272.45

Moroso Battery Cable Kits

Moroso battery cable kits are just what you need if you are relocating your battery. Their high-grade copper cable provides unrestricted current flow and comes in the famous Moroso blue. Their rugged PVC insulation resists underhood and undercar fuels, oils, and debris. The kits include a cable, terminals, 12-gauge leads, grommets, insulated clamps, and shrink sleeving.

Not Yet Reviewed

$265.99

Warn Wire Ropes

If the wire rope on your Warn winch is damaged, replace it with these quality replacements from Warn to provide for the safe operation of your Warn winch. These wire rope replacements feature a swaged loop on one end and a wire rope terminal on the other end for an easy hookup. They're constructed from aircraft steel, are galvanized to prevent corrosion, and come in various diameters and lengths. Protective gloves must be worn when handling wire ropes or operating your winch to avoid injury.

4.92 out of 5 stars ( 13 )

$257.99

California Pony Cars Clutch Cable Conversion Kits

California Pony Cars clutch cable conversion kits are "naturals" for performance. To be used in conjunction with late model T5-type bellhousings and throw-out arms, these strong CPC systems have no moving parts to wear out; and they will maintain a constant length over the lever arm, as the clutch pedal and quadrant move through their travel. They are ideal for mid-1960s Mustang applications. CPC takes pride in the cable conversion systems they manufacture and offer a limited lifetime warranty. Kits include: * Quadrant * Cable stop/firewall reinforcement bracket * Cable

Not Yet Reviewed

$264.95

On Sale

XS Power XS Flex Power Cables

These XS flex power cables are XS Power's flagship power cables. They are available in blue, clear, and black and come on 50 ft. spools. They are 100 percent pure oxygen-free tinned copper cables with a massive 4,704-strand count. These cables are far superior to other cables on the market and, like all other XS Power cables, meet and exceed industry standards. If you've bought a battery or charger from XS Power, then you know that XS Power has a reputation of manufacturing the highest quality batteries on the market. So, when you need cabling, make sure that you get these XS Power XS flex power cables.

5.0 out of 5 stars ( 1 )

$305.99

—

$349.99

$275.39

—

$314.99

Dorman Automatic Transmission Shifter Cables

Are you looking to replace your shifter cable? Get one of these Dorman automatic transmission shifter cables for reliable shifting performance. They are manufactured from quality materials and have been designed to fit your OEM shifter assembly and install in the stock location. Don't take chances with damaged or worn shifter cables--Dorman automatic transmission shifter cables won't leave you stranded.

3.0 out of 5 stars ( 2 )

$259.99

Lokar Transmission Mount Emergency Brake Cables

These Lokar transmission mount emergency brake cables are designed for use with Lokars transmission mount emergency hand brakes. Kits include the bracket for mounting to the hand brake, quality one-piece aluminum adjusters and aluminum ferrules. The cables are cut-to-fit with a PTFE lined outer housing for smooth operation and the stainless inner cable resists moisture.

4.86 out of 5 stars ( 14 )

$333.95

Bubba Rope Synthetic Winch Lines

Bubba Rope synthetic winch lines are stronger, lighter, and safer. The lines are 3/8 in. plasma rope with a breaking strength of 17,000 lbs. They are armored with a Gator-ize vinyl polymer coating, marked with red bands every 10 ft., and fitted with rigid non-metal thimbles. These Bubba Rope features deliver better protection against abrasion, sand, and ultraviolet light. They are a visual gauge for the amount of rope you have out, and have the strength of steel without the weight. They are also repairable and include their super-robust Gator-Jaw synthetic shackle and removable Bubba Rope Life Guard for added rope protection. Bubba Rope synthetic winch lines offer you a better, safer way to successfully perform vehicle recovery.

Not Yet Reviewed

$274.99

—

$359.99

375 Results Found For "cable"