Availability
OEM Automotive tools manual bushing installation and removal tool sets are a comprehensive kit that allows the technician to service a wide range of bushings, seals, and bearings without removing components from the vehicle. Works on silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bushings, and more. The sets come with 20 cups and receivers for hundreds of combinations. Plates and sleeves can be also be used in a standard workshop press when on-site access is not possible.
( 2 )
$279.99
Most old and new suspension bushings are pressed in and out with old bearing shells, sockets or just anything you can find. This creates a safety issue, given that heat-treated steel will shatter under stress. The assortment of sleeves that make up the Whiteline bushing and bearing press tool kit are made from mild steel to allow distortion or crush when over-pressed. These newly designed tools provide an easy way to install and remove Whiteline polyurethane bushings and aid in other workshop pressing requirements. These kits are ideal for use on bearings, bushings, spherical joints, or other applications. They can be used on a workshop press or directly on a vehicle. Less force is required to remove / install bushings, bearing and joints—making use easy even without power tools. Kit contents: * 18 x sleeves: 28mm-113mm diameter (5mm increments) * 4 press plates * 4 pulling spindles covering these bolt sizes (M10, M12, M14, M16) * Rolled thread on spindles * Nuts with double washers and encapsulated lubricated ball bearings for strength and longevity (stops nut from binding and stripping thread)
Not Yet Reviewed
$499.88
OTC upper control arm bushing service sets allow you to easily replace press-in type upper control arm bushings on most rear-wheel drive Chrysler, Ford, and GM vehicles. A mechanical screw power easily removes the worn bushing and installs the new one without damaging the control arm. These service sets include a C-frame, screw assembly, and the adapters/inserts necessary for you to do the job correctly.
Not Yet Reviewed
$274.99
Rusted or seized bushings are not match for these OTC pullers. This OTC tool works on any angle OEM bushing, removing it quickly and without damage. Includes the adapters to pull most aftermarket bushings having removable retaining rings.
Not Yet Reviewed
$444.99
OTC truck brake anchor pin and bushing service sets are less complicated and less time-consuming. With these sets, there is no need to remove the bearing hub assembly just to replace the pins and bushings on 16 1/2 in. S-cam trailer and tractor "Q" brake systems. The special tooling and OTC C-frame press gets you past the hub assembly, so you can do the job quickly and professionally without damaging other parts. Everything needed is included for removal and replacement. OTC truck brake anchor pin and bushing service sets include a C-frame press and tooling in a plastic storage case; however, tooling is available separately for the tech who already owns the 7248 C-frame press.
( 1 )
$360.99
Mueller Kueps C-clamps are specifically made to be used with impact tools, increasing force and speed when removing or installing bearings, bushings, shaft seals, etc., and are excellent for use in confined areas. Designed as a supplementary tool, these C-clamps can also be used with a 12-ton hydraulic spindle (Mueller 609-210, not included) or with an impact wrench for greater application of force. Includes spindle TR27 with press discs from press adapters with ball bearings to fit step and pull sleeve kits (sold separately).
Not Yet Reviewed
$543.25
Milwaukee 1/0 AWG-750 MCM Cu THHN/XHHW bushing kits are individually engineered to give safer and cleaner strips on all sizes specific to each cable. They protect against knife injuries on the job—and have a jacket ejection slot that prevents jamming and allows for easy material removal. Every cable stripper bushing features industry-standard colors to indicate wire size. Additionally, the wire size, material, and jacket type are clearly marked on each bushing for easier identification. These quick-change bushings are compatible with both Milwaukee's M18 and M12 cable strippers, allowing them to perform faster stripping on either battery platform. Milwaukee 1/0 AWG-750 MCM Cu THHN/XHHW bushing kits have replaceable cutting blades for easy in-field changes. Kit includes: * 1/0 AWG Cu THHN/XHHW bushing * 2/0 AWG Cu THHN/XHHW bushing * 3/0 AWG Cu THHN/XHHW bushing * 4/0 AWG Cu THHN/XHHW bushing * 250 MCM Cu THHN/XHHW bushing * 300 MCM Cu THHN/XHHW bushing * 350 MCM Cu THHN/XHHW bushing * 400 MCM Cu THHN/XHHW bushing * 500 MCM Cu THHN/XHHW bushing * 600 MCM Cu THHN/XHHW bushing * 750 MCM Cu THHN/XHHW bushing * Carrying case
Not Yet Reviewed
$459.99
Milwaukee 1/0 AWG-750 MCM AI THHN/XHHW bushing kits are individually engineered to give safer and cleaner strips on all sizes specific to each cable. They protect against knife injuries on the job and have a jacket ejection slot that allows for easy material removal and prevents jamming. Every cable stripper bushing features industry-standard colors to indicate wire size. Additionally, the wire size, material, and jacket type are clearly marked on each bushing for easier identification. These quick-change bushings are compatible with both Milwaukee's M18 and M12 cable strippers, allowing them to perform faster stripping on either battery platform. Milwaukee 1/0 AWG-750 MCM AI THHN/XHHW bushing kits have replaceable cutting blades for easy in-field changes. Kit includes: * 1/0 AWG AI THHN/XHHW bushing * 2/0 AWG AI THHN/XHHW bushing * 3/0 AWG AI THHN/XHHW bushing * 4/0 AWG AI THHN/XHHW bushing * 250 MCM AI THHN/XHHW bushing * 300 MCM AI THHN/XHHW bushing * 350 MCM AI THHN/XHHW bushing * 400 MCM AI THHN/XHHW bushing * 500 MCM AI THHN/XHHW bushing * 600 MCM AI THHN/XHHW bushing * 750 MCM AI THHN/XHHW bushing * Carrying case
Not Yet Reviewed
$399.00
Get longer wear from your existing BuildPro table with Strong Hand Tools BuildPro MAX welding table plates! Strong Hand Tools BuildPro MAX welding table plates are self-locating! Patented bushing design (U.S. PAT. 9636786) will allow you to remove, re-position, re-align, and reverse the table plates. When the surface of your Strong Hand Tools BuildPro table plates show signs of wear, simply turn the BuildPro MAX welding plate over to provide a new work surface! These individual steel BuildPro MAX welding table top plates are offered in different widths, lengths, and finishes. The mounting hardware is sold separately. Select the table top plate designed for your application needs. How to reverse your plates—prep by removing spatter around mounting hole area before reversing plates. Step 1: Remove all flush mount socket head cap screws from one table plate. Step 2: Remove all locating bushings. Step 3: Lift plate, turn over, and place over the counterbore, aligning with mounting holes. Step 4: Working from the two plate holes at one end of the plate, insert locating bushings—repeat on other end of the plate. Step 5: Insert all remaining locating bushings. Step 6: Insert socket head cap screws, starting at the center of the plate. Tighten. Step 7: Insert all remaining socket head cap screws. Tighten. Step 8: Repeat this process for all table plates. Your new work surface is now ready for use!
Not Yet Reviewed
$260.10
—
$483.55
Steeda offers spherical control arm bushings for dozens of Ford vehicles from 1979 and up. These replacements are available in different styles and are a perfect addition to your racing suspension system. The bushings eliminate binding and allow super high-horsepower applications to retain their "stock type" suspension systems.
( 16 )
$269.95
Whiteline front and rear essential vehicle kits contain vital bushings needed for your ride to activate more grip—conveniently gathered in one package. These comprehensive kits are available for hundreds of vehicles from 1990 and up, enabling you to easily rebuild, maintain, or upgrade the support components on a variety of key steering and suspension areas.
Not Yet Reviewed
$411.88
—
$549.88
Whiteline offers radius arms for a wide range of vehicles. These heavy-duty adjustable control arm kits are designed to allow for increased range of camber adjustment. Low compliance bushings are used to minimize NVH and maximize longevity; and left/right hand thread adjustment turn-buckle nuts allow for easy on-car adjustment. Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints (if applicable). Additional details: * The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering * Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life * Designed with the installer in mind by reducing the need of specialized skills, tools and equipment * Engineered to alter/ optimize caster alignment to maximize tire contact patch during roll, improve turn-in response and increase directional stability * Protective E-coat powdercoating acts as a hard skin that is much tougher than conventional paint, allowing this product to withstand the toughest conditions and resist corrosion for years to come * Install guide included, providing detailed instructions on how to install your new purchase
Not Yet Reviewed
$575.88
Most would agree that the time and stress to remove and replace trailing arm bushings is hard to justify. Finding the correct size press adapters, purchasing specialty tools, and potentially damaging the trailing arms are just a few problems one can encounter. Why put yourself through the stress? Nolathane offers complete trailing arms, already fitted with superior Nolathane bushings, for a simple, direct bolt-on installation. They're available in different configurations for a wide range of applications, from the 1990s and up.
Not Yet Reviewed
$269.87
—
$399.87
Most would agree that the time and stress to remove and replace control arm bushings is hard to justify. Finding the correct size press adapters, purchasing specialty tools, and potentially damaging the control arms are just a few problems one can encounter. Why put yourself through the stress? Nolathane offers complete control arms, already fitted with superior Nolathane bushings, for a simple, direct bolt-on installation.
( 2 )
$489.87
—
$499.87
Made from heat-treated 4140 chromoly spring steel, these Hellwig anti-sway bars reduce body roll, even during tight cornering. They come with high-durometer polyurethane bushings to ensure superior performance—and install easily with basic hand tools. Mounting hardware is included.
( 569 )
$277.17
—
$461.63
If being able to adjust your cam timing quickly and easily is a top priority, then COMP Cams Ultimate Adjustable billet timing sets could be the answer. They have 2-piece billet steel cam sprockets, which let you change cam timing without removing the degree wheel or releasing the valvetrain load, and there's no cam bushing to break. Timing can be varied from 6 degrees retarded to 6 degrees advanced. Chains are heavy-duty, double-row types with hefty 0.250 in. rollers. A one-piece roller thrust bearing handles unwanted end loads.
( 7 )
$271.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
