Availability
Showing In Stock Items. Show All 47 Items.
Bowler Performance T-56 Magnum NightStick shifters are available in several offsets for applications requiring a specific shifter placement, no offset for OE replacement of worn out or leaking originals, and the Tremec mid-shift position should you need to move the shift location even further forward. Bowler's T-56 Magnum NightStick (OE) retains the factory Tremec shift stub location and can be used in the forward or rear position. The NightStick offset shifters are shipped with a predetermined shift lever location set. If you should need or want the shifter in a different location, you can easily adjust the settings. The upright for the shift lever is held on with a nut and interference fit similar to that of a ball joint that can be rotated 360 degrees and locked back down in any position. The holes that attach the shift lever are threaded all the way through so you can mount your shift lever from either side. The offset base bracket also has an octagonal pattern machined into the attachment point to allow full 360 degree rotation as well. Simply unbolt and rotate to whichever position is best for your application. All the Bowler T-56 Magnum NightSticks are finished in a sleek midnight black anodize with the unmistakable Bowler "B" logo etched on top. The design combines the ball and socket shift stub found on the Viper Spec 6-speed with a completely new base plate configuration utilizing snap-ring retention to keep constant pressure on the ball socket enclosure, eliminating the ability for fluid to leak up past the shift stub. The composite ball used on the shift stub creates a smooth feel with no rattle. Bowler caps the top with a dust boot to keep out debris. Choose the ideal NightStick shifter for your Tremec.
Not Yet Reviewed
$499.99
Quick shifting by Steeda Tri-Ax shifters for the Tremec T56 transmission! Get smooth and precise shifts. They are manufactured from CNC-machined billet aluminum to ensure performance and durability. The offset tension coil springs and high-ratio pivot mechanism eliminate sloppiness and make power shifting easy.
Not Yet Reviewed
$256.14
American Powertrain Maglink adapter kits are designed for uniquely adapting GM Magnum, LT T56, LS T56, and Viper T56 transmissions to GM TKO, Muncie, or T-10 bellhousings. They include a CNC-machined aluminum Maglink adapter plate, extended bell housing dowel pins, conversion pilot bearing, Muncie-spec bearing retainer, hardware, and instructions. Save money and replace only your bellhousing internal parts with American Powertrain Maglink adapter kits.
( 1 )
$410.95
—
$425.95
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 37 )
$378.95
—
$449.95
Tilton's 6100-Series hydraulic release bearings feature race-proven Tilton reliability for the street. These hydraulic release bearings have been designed for ease of installation and maximum reliability, at a very competitive price. 6100-Series hydraulic release bearings are designed to mount onto the transmission input shaft bearing retainer, and are compatible with a variety of transmission types.
( 47 )
$382.50
—
$442.00
These McLeod manual transmission adapters are designed to mount your factory bellhousing to an aftermarket transmission. They are made of billet aluminum for strength, and their pre-drilled bolt holes make installation simple.
( 7 )
$296.40
Avoid messy modifications and awkward shift angles; get moving faster with Sikky Manufacturing relocation short-throw shifters! They are designed and manufactured using base plates CNC-machined from 6061 billet aluminum, and then clear anodized for increased durability and corrosion resistance. Their heavy-duty shift rods and linkages are CNC-machined from stainless steel, and the shifters incorporate a boot on the bottom side of the front rod to eliminate any worries of leaking. Whether your vehicle is for the street or track, Sikky Manufacturing short throw shifters are the way to go for the best fit with smooth crisp shifts. Features include: * Works with a variety of engine and transmission swaps * Relocates shift rod location back from standard configuration * Reduces shift throw by 44 percent for faster shifts * Please confirm transmission fitment before ordering
Not Yet Reviewed
$531.99
Silver Sport front shift kits allow you to move the shifter from the stock rear location to the front at a more bench seat friendly 13.5 in. behind the clutch housing on specific 6-speed transmissions. They feature SST's short throw, billet shift tower with a compact and efficient design and accepts popular 2-bolt style handles. They include detailed instructions to walk you through the conversion.
( 2 )
$399.95
—
$439.95
Get your transmission in gear with one of these American Powertrain White Lightning shifters. They feature a billet aluminum base plate and tower with billet steel center core, plus an independent bias adjustment—an industry exclusive that significantly improves 2-3 shift action and overall shift feel with the simple turn of a screw. Their low-profile design is perfect for increased tunnel clearance, and the short throw action provides for accurate shifts. Dozens of models are available, for universal or transmission-specific applications.
( 9 )
$350.95
—
$399.95
On Sale
Hurst Blackjack shifters locate the shifter handle in the proper location for your application. The Blackjack housings are CNC-machined from billet 6061 aluminum, anodized with a tough black MIL-spec finish, and finally engraved with the Hurst logo in the top plate. Each setup includes a zinc-plated and hardened chromoly steel stick adapter, dual stick centering springs, hardened chromoly pivot pins, and a durable Delrin pivot ball for positive, quiet operation. The classic Hurst chrome flat bar stick and white shift ball for the specified application completes the Hurst Blackjack shifters.
( 20 )
$749.95
$412.95
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
Clearance
American Powertrain manual transmission bellhousings are designed to properly mate your transmission to the engine block. They feature all-new CNC-machined aluminum castings for tight tolerances and a precision fit. The bellhousings are available for different engines and transmission styles. Order the model recommended for your application.
( 17 )
$347.99
$261.50
Lakewood manual transmission installation kits allow you to complete your LT engine swap with a fun-to-drive T56 manual transmission. Specially prepped to fit your vehicle, these kits include all necessary fasteners and spacers needed to install a GM T56 Magnum or 1998 to 2002 GM LS T56 transmission to the popular L83-L84 Gen V engine. The spacers provided in the kit retain OE specs when using a single disc clutch. These kits include the bellhousing spacer, hydraulic release bearing spacer, transmission dowels, pilot bearing, bellhousing bolts, and hydraulic release bearing bolts.
Not Yet Reviewed
$292.95
Hays hydraulic release bearing kits will convert your favorite factory hydraulic-equipped car from a mechanical-style to hydraulic-style release bearing. Hays throwout bearings offer full adjustability, reduced pedal effort, and an easy set-up with most single or dual disc clutches. These kits are designed to fit various manual transmissions; order the model recommended for your vehicle and tranny application. Features and benefits include: * Improved clutch engagement and disengagement * Adjustable design provides increased travel over stock release bearing * Retrofit kits offer a simple way to add easy-effort hydraulic clutch actuation * Floating design bearing with large O-rings and PTFE backup rings to eliminate fluid leakage * Kits include bearing assembly, bearing retainer (where required), mounting hardware, adjustment shims, and -3 AN feed line
( 4 )
$312.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$320.95
—
$399.95
Silver Sport manual transmission bellhousings offer aluminum construction and an ideal match for your street or strip tranny. SST bellhousings are available for popular GM, Ford, and Mopar applications, and are perfect for powertrain builds, restorations, and swaps.
( 7 )
$359.95
—
$480.95
P-Ayr Replica transmissions are designed to bolt on to the engine for test fitting any fabrication you may need to make to the frame or chassis. They include mounting points to OEM specifications to ensure accuracy, and are made from durable polyurethane foam for long life.
( 30 )
$369.99
UMI Performance transmission crossmembers are designed for late model F-bodies. These crossmembers are built using 0.120 in. rectangular tubing, 0.188 in. mild steel mounting plates, and a 0.375 in. thick transmission mount. These crossmembers are powdercoated bright red or gloss black and include new mounting hardware.
( 5 )
$279.99
—
$349.99
Tilton 6000-Series hydraulic throwout bearings feature race-proven reliability for the street! They have been designed for easy installation and maximum reliability at a very competitive price. The bearings feature a stainless steel threaded bearing retainer-mount sleeve that offers nearly 1.25 in. of adjustability, enabling them to be used with most 8.5 to 10.5 in. bent-finger, diaphragm-type clutches. The Tilton 6000-Series hydraulic throwout bearings include a -4AN stainless steel braided line supply line, a bleed line and fittings, a stainless steel threaded adjustment sleeve, and a special bearing retainer bolt.
( 2 )
$442.00
Whether you're installing a traditional 4-speed or a modern 5- or 6-speed, getting the clutch to operate properly is always a big step. With American Powertrain Hydramax hydraulic throwout bearings you can skip the clunky old mechanical linkage. They easily install in almost any rear-drive vehicle. The bearings are designed to work with original and aftermarket pedals, and are available for most vintage 4-speeds, along with TREMEC T-5, TKO, Richmond, T56, and Magnum 6-speed transmissions.
( 14 )
$345.45
—
$399.95
Hinson Motorsports short-throw shifters have no internal centering springs (thus eliminating missing gears due to wear) and narrow gates for quick, responsive control. Life's too short to deal with shift throws that are so long you end up hitting your funny bone on the center console. Avoid that and the pitfalls of missing a gear due to long, unruly handles by slamming through them with Hinson Motorsports short throw shifters instead! Please verify the fitment for your application when ordering. These high-quality shifters feature: * Available without or with various types of knobs * CNC-machined, anodized aluminum base with internal seals * Heavy-duty, hardened steel shifter handle to smoothly pound through gears * Grade 10, black oxide coated oversized hardware * Designed to handle extreme stress * 7/16 in. hardened studs
( 42 )
$385.00
Style is about details in looks and fit. Clayton Machine Works adjustable truss-style shifter arms offer great details for your interior. Machined from strong billet aluminum and coated with a fabulous gray powdercoated finish, these Clayton truss-style arms are adjustable in 10 degree increments to provide you with a custom fit and feel. Plus, their unique triangular framework design is ready to support smooth shifts with an abundance of smooth style. Yep, it's all about the details, and Clayton Machine Works adjustable truss-style shifter arms have all the elements of great style.
Not Yet Reviewed
$316.95
Level 7 Motorsports 1967-72 C10 extended high hump transmission tunnels feature a stock replacement design but extended further back to completely cover a Tremec T-56 Magnum 6-speed transmission. You will also gain room to get the transmission high enough for correct pinion angles on a significantly lowered truck. Take your vintage truck to the next level with Level 7 Motorsports 1967-72 C10 extended high hump transmission tunnels. Other product features and items include: * All necessary hardware * Rigid fiberglass construction * Detailed instructions
Not Yet Reviewed
$494.99
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$470.95
—
$471.95
$259.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
