Availability
Lucas Synthetic transmission oil is designed for use in heavy-duty truck transmissions, but it can also be used in many other applications. This oil contains an exclusive additive concentrate derived from synthetic oil that lowers operating temperatures and offers lubrication that's superior to conventional fluids, especially for the upper bearings and gears. Lucas Synthetic transmission oil contains no harmful additives, such as sulfur or phosphorus. This long lasting fluid is far superior to conventional synthetic fluids and contains nothing that could be harmful. This product meets or exceeds API MT-1, Eaton Transmission Div., 164 rev 7, Mack Truck TO-A Plus, International Truck TMS 6816, and other applications requiring non-EP lubricants.
( 4 )
$259.99
Lucas Diesel Deep Clean fuel system cleaner reduces the cost and hassle of particulate filter maintenance, and is an excellent preventative maintenance product. It causes the fuel to burn much cleaner, thus eliminating a lot of particulate matter that would otherwise go into the exhaust system causing "regens". It also cleans out much of the matter already trapped in the filter, eliminating exhaust backpressure allowing the engine to run easier and cooler, as well as lowering the aggravation and down time associated with particulate filters. Lucas Diesel Deep Clean benefits include: * Reduces particulate matter in filters * Cleans fuel injectors * Restores power loss * Improves acceleration
( 1 )
$299.99
Lucas racing only gear oil has been tested on a gear box dyno and was developed with feedback from a major IRL team. Its lightweight, friction-free design is perfect for super speedways, increasing usable horsepower to the ground by reducing drag and friction. Lucas racing only gear oil combines special anti-wear ad lubricity agents with special synthetic base stocks to form a thermally stable product.
( 5 )
$294.99
—
$459.99
Lucas High Performance motorcycle oils are the result of technology gained through years of blending motor oils and gear oils for the racing, industrial, and agricultural industries. Lucas Oil is trusted by professionals throughout the world to protect their race cars, trucks, and machinery—and now you can trust them to protect your motorcycles and ATVs. They offer a full line of motorcycle oils that far exceed all OEM specifications. Lucas motorcycle oil will lower oil temperature, extend the life of your vital components, reduce noise and leaks, and increase performance. On top of all of that, it will outlast other oils by up to four times! These oils can be used in any air-cooled or water-cooled motorcycle or ATV engine. Choose from synthetic, semi-synthetic, and mineral oil in the weight recommended for your application.
( 78 )
$304.99
Lucas S1/S2 racing suspension fluid was originally designed to guarantee a narrow, consistent rebound range for Indy cars. After multiple wins there, it has been proven equally superior in many other forms of racing, including NASCAR and off-road. It will provide superior dampening, control heat and lower operating temperatures, and eliminate shock fade. Lucas S1/S2 racing suspension fluid's synthetic formula also contains special anti-wear and lubricity agents that produce excellent thermal stability.
( 1 )
$289.72
—
$392.82
Lucas Extreme Duty Bore Solvent & Ultrasonic Gun Cleaner was also designed to thoroughly and efficiently clean firearms using an ultrasonic cleaner; and its high flash point makes it ideal for heated tank units. The special formulation can be used straight from the bottle in ultrasonic cleaners without any messy mixing and without having to use a rinsing agent or lubrication dip, saving you time and money. After ultrasonic cleaning, simply remove your firearm, allow it to drip dry or used compressed air; and lubricate per manufacturer's instructions and reassemble. Your firearm is clean, protected from corrosion inside and out, lubricated and ready for storage, carry, or use. Key benefits: * Cleans and protects your firearms; provides excellent rust protection * Low odor, pleasant grape scent, contains no ammonia, kerosene or water * Great for use in ultrasonic cleaners; solvent-based formula requires no mixing, rinsing or oil dip after ultrasonic use, saving time and money * Ideal in heated units, flash point of 210 degrees F is much safer than other products * Available in different sizes, individually or in container sets
Not Yet Reviewed
$259.99
Lucas Extreme Duty Gun Oil is a special blend of oil and petroleum-extracted additives—producing a lubrication specially formulated for high volume, high heat, and friction firearms. It is designed for semi-auto rifles, shotguns, and pistols, as well as full auto firearms and suppressors. The oil offers superior burn-off resistance. Its polymeric film protects metal from rust and moisture—and dramatically reduces wear during all shooting conditions. Applying Lucas Extreme Duty Gun Oil to bores, bolt carriers, and gas pistons makes clean-up of powder residue, copper, and carbon fouling a much easier task. It neutralizes acids from fingerprints and resists drying for long-term storage use. Lucas Extreme Duty Gun Oil is great for lubrication on all high-heat, high-use firearms. It is sold in a variety of sizes and quantities.
( 2 )
$279.99
—
$417.99
Lucas Red "N" Tacky Grease is smooth, tacky, red lithium 12-OH grease fortified with rust and oxidation inhibitors. It has good water resistance and washout properties, as well as excellent mechanical stability and storage life. It is able to withstand heavy loads for extended periods of time and is a great grease for sliding surfaces and open gears.. It can be used in many agricultural, automotive, and industrial applications.
( 44 )
$391.99
Lucas Oil Bag In A Box oil program is specifically designed to be used by dealerships, auto repair shops, and quick lubes for their ability to carry multiple oil grades. This oil storage rack occupies a small 2 ft. x 2 ft. area of floor space, and will hold up to 6 oil containers and 6 oil dispensing jugs.
Not Yet Reviewed
$429.99
This Lucas metal polish cleans, polishes, and protects aluminum and other metals. It features built-in enhancement elements that help to prolong and protect the treated surface from fading, oxidation or tarnishing. The Lucas metal polish contains no acid, no ammonia, so it's safe for use on all metals.
Not Yet Reviewed
$309.99
Lucas SxS/UTV Transmission Fluid is blended from premium synthetic base oils only (API Groups III and V), combined with shear stable synthetic polymers—a high-quality additive package that includes anti-wear, anti-oxidants, and corrosion inhibitors to produce a truly superior side-by-side transmission fluid. This lubricant was designed specifically to meet the requirements of Polaris vehicles' transmissions/gear cases, including ACE, Sportsman, Ranger and RZR; and may be used safely as a substitute for AGL. It will not permanently shear thin, ensuring that viscosity remains constant over the life of the fluid. Key benefits: * Contains EP additives for extreme shock and wear protection over a range of temperature and speeds * Premium anti-wear formula provides total chain and gear wear protection * Reduces the effects of shock-loading * Expect smooth consistent operation * For use in 4-stroke off-road vehicle transmissions and gear cases * Prevents rust, oxidation, foam and corrosion of internal components * Will hold up under heat and stress Primary application: * Polaris side-by-side (SxS) and ATV transmissions * SxS/UTV Product Application Chart
Not Yet Reviewed
$319.99
Lucas synthetic racing gear oil is designed for heavy-duty applications facing high-horsepower, high-torque conditions. Developed with desert racers in mind, it is made from the highest-quality heavy synthetic base oils, along with a proprietary package of additives and extreme-pressure lubricants. The formula is specially engineered for shear stability and the severe demands of racing conditions. Lucas synthetic racing gear oil is great for use in trophy trucks and pulling tractors to protect the rear differential during heavy shock loads and extreme temperatures. It provides a barrier cushion between metal surfaces and absorbs impact for protection against wear, pitting, and scoring.
( 1 )
$612.99
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 207 )
$255.65
—
$272.10
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$280.10
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 998 )
$335.25
—
$402.10
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$255.65
—
$446.65
Get more giddy-up! Ron Francis Wiring Bare Bonz wiring systems are fully customized to match your application. The wiring panel features relays, fused circuits, plenty of color-coded and printed wires to complete the installation, and a full set of instructions. They include wiring and circuits to take care of your basic engine, dash, lighting, gauges, some accessories, and are built well enough to be compatible with electronic fuel injection. Get your Ron Francis Bare Bonz wiring system today.
( 2 )
$529.15
HEL Performance braided stainless steel brake hoses provide the feel and response that gives you the confidence you need on the road. They are assembled in-house from the finest quality stainless steel fittings swaged directly to hard-drawn tensile stainless steel braided hose. These lines feature a variety of outer shell color options for a truly custom look. Don't risk using inferior brake lines when you can trust HEL Performance braided stainless steel brake hose assemblies to improve braking reliability and performance on your ride.
( 2 )
$418.60
The legendary TEN platform was known around the world as one of the toughest platforms on the planet. Taking on any terrain, these trucks and buggies threw the gauntlet down on off-road excitement. The Losi Tenacity DB Pro 1:10 scale 4WD desert buggies are a continuation of that dominance. The Tenacity DB Pro includes a full metric hardware package and aluminum features the competition sells as optional parts. These desert buggies feature all the technological advances drivers demand including the Spektrum Smart 130A brushless ESC and Spektrum Firma 4-pole 3150KV 550 motor allowing you to hit 50 plus mph with a 3 cell LiPo battery. Of course, the ESC is waterproof, completely programmable and comes pre-wired with a high-current IC5 connector. Drivers stay in control with a DX2E Active transmitter, a Spektrum AVC receiver with steering priority, along with scale-to-size Falken Wildpeak MT tires and Method wheels. Finally, the Tenacity DB has a scale-inspired desert buggy body along with a new wing and off-road buggy inspired wheel design that looks good in the backyard and out in the desert blasting berms. You get all this and more from the Tenacity DB Pro 1:10 scale 4WD desert buggies.
( 1 )
$499.99
Replace your worn out Lucas 35D distributor with a Pertronix Flame-Thrower performance cast Rover V8 distributor that will deliver the performance you demand. These Flame-Thrower performance distributors are the perfect solution for Rover V8 engine swaps. Available with integrated Ignitor or Ignitor II technology increases energy levels and provides maintenance free operation. Installation is simple with only two wires to attach. These distributors are made from all new castings and modeled after the original Lucas 35D housing. Each distributor is then precision machined for an exact fit. Additional features include: * All new lightweight cast aluminum housing * Integrated electronic ignition delivers more voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life * Rotating cobalt magnets trigger the Hall Effect integrated circuit which provides precise timing * High dielectric strength distributor cap * Balanced rotor with overmolded brass contacts * Legal in all 50 states carrying CARB EO# D-57-23
( 8 )
$272.57
—
$383.00
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Performance powdercoated brake calipers are made specifically with the enthusiast in mind. They bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are treated with an electrostatic high-temperature powdercoating. The easy-to-clean powdercoating helps to resist rust and corrosion, thus extending their life. They are 100 percent pressure-tested to verify piston operation and prevent any possible leaks from occurring, ensuring that every caliper is inspected for quality and safety. Calipers are expertly assembled using new pistons, seals, slide pins (where applicable), dust boots, bleeder screws, and stainless-steel brake pad abutment clips. High-temperature EPDM rubber dust boots and premium silicone lubricant are used for a smoother operation and an extended life in extreme conditions.
( 736 )
$432.00
If you've stepped beyond the ability of your stock brakes, then DBA HD Series 4000XS brake rotors are perfect for you. These rotors contain many of the features that make DBA brake rotors so great. Their patented Kangaroo Paw ventilation, XG150 iron alloy, and TSP process work together to allow these rotors to handle high-heat situations. Their non-directional, XS cross-drilled, slot design eliminates the need for different left and right discs and provides a consistent, strong brake feel. To top off these awesome rotors, DBA applies a protective paint to all non-friction surfaces and adds heat marks so you can monitor your peak brake heat. Have more confidence in your brakes with these DBA HD Series 4000XS brake rotors, available to fit a variety of specific applications.
( 7 )
$263.12
Hawk Performance Talon rotors are balanced with precision-milled slots, allowing for a reduction in harmonic resonance issues, a cleaner pad surface, and debris evacuation. The rotors' cross-drilled design optimizes thermal efficiency, heat dissipation, and strength—as well as improves wet braking. In addition, a Magni coating barrier helps to maintain corrosion resistance and ensures a quick and simple bed-in that resists galling. For drivers looking for quality products for their brake system, the obvious choice should be Hawk's Talon rotors! Order the size recommended for your vehicle. Additional features of Hawk Talon brake rotors: * Various styles include solid or vented, and slotted surface (only) * OE fitment, weight and production process * DTC-curved slot design * Reduction in noise * Manufactured in ISO-certified facilities with G3000 metallurgy automotive casting material
( 3 )
$337.59
Hawk Performance's DTC 60 brake pads feature high torque with less initial bite than their DTC 70 pads. Featuring superior release and torque control characteristics, the pad compound is designed for cars with high deceleration rates with or without downforce. This model is recommended for use with DTC 70 when split friction between front and rear axle is desired. Order the universal or application-specific replacement pad set designed for your caliper type.
( 17 )
$255.59
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
