Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
326 Results Found For "JET"
Showing In Stock Items. Show All 426 Items.
NOS Flare Jet Packs
The importance of properly jetting a nitrous system cannot be overemphasized! To properly adjust the power level of street-type kits, you need to have the right jets on hand. These are the most common type of jets and are typically used in most nitrous kits. Manufactured for dealers that want a large selection of jets for various applications, or racers looking for the widest range of tuning options, these kits contain a variety of sizes to suit virtually any need.
( 11 )
$275.95
—
$434.95
NOS Sportsman Fogger Nitrous Flare Jet Packs
NOS Sportsman Fogger nitrous flare jet packs enable you to properly jet—to harness and control more power. These kits have been carefully assembled to give you a wide range of tuning alternatives for maximum propulsion. They include a supply of stainless steel flare jets in sizes ranging from 0.018 in. to 0.032 in. Whichever Fogger system you use, you'll always have the jets on-hand to effectively utilize the power of nitrous oxide.
Not Yet Reviewed
$399.95
Pro-X Racing Parts Mikuni Main Jet Assortment Kits
Whether you're rejetting for altitude changes, adjusting for aftermarket modifications, or optimizing your bike's fuel-air ratio, Pro-X main jets deliver precision sizing, consistent fuel metering, and race-proven reliability. With strict quality control and precision machining, these jets eliminate bogging, improve fuel efficiency, and enhance overall engine responsiveness, making them the go-to choice for racers, mechanics, and performance enthusiasts seeking peak power and throttle precision. Pro-X Racing Mikuni main jets will fit many Mikuni carburetors, like Mikuni VM Roundslide and TMX, RS carbs, and they offer a wide range of jets for 4/042, N100.604, N102/221 and VM11/22 Series Mikuni carburetors. Pro-X main jets are manufactured in Japan to exact OEM specifications and are offered as a cost efficient alternative for the relative expensive original parts. Fine-tune your carburetor using Pro-X jets. Select the jet sizes needed for your off-road ride.
Not Yet Reviewed
$255.99
Pro-X Racing Parts Mikuni Pilot Jet Assortment Kits
Whether you're rejetting for altitude changes, optimizing your air-fuel ratio, or upgrading for better performance, Pro-X pilot jets offer precise sizing, uniform flow rates, and race-proven reliability. With strict quality control and precision machining, these jets eliminate hesitation, improve fuel efficiency, and ensure crisp throttle transitions, making them the perfect choice for riders, mechanics, and tuners looking to maximize engine performance. Pro-X Racing Mikuni pilot jets will fit many Mikuni carburetors, like Mikuni VM Roundslide and TMX, RS carbs, and they offer a wide range of jets for M28/1001, N224.103 and VM22/210 Series carburetors. Pro-X pilot jets are manufactured in Japan to exact OEM specifications and are offered as a cost efficient alternative for the relative expensive original parts. Fine-tune your carburetor for altitude changes, aftermarket modifications, and peak performance tuning using Pro-X jets. Select the jet sizes needed for your off-road ride.
Not Yet Reviewed
$305.99
Nitrous Express Nitrous Jet Packs
Nitrous Express nitrous jet packs are precision-made and guaranteed to be within .0005 in. of the specified jet size. NX brass jets can outflow the competition by 35 percent. How? They are crafted on CNC equipment with contoured inlets and multi-stepped outlets, which results in an unrestricted, turbulent-free flow of go-juice. Feed your system for powerful performance with Nitrous Express nitrous jet packs.
( 6 )
$274.28
—
$380.95
Nitrous Outlet Flare Jet Packs
If you're big into performance, we can't stress enough the major importance of jetting your nitrous system. Many racers casually assume that a jet is a jet--that all are created equally. However, Nitrous Outlet suggests that precision manufacturing and the jet design can make a huge difference in performance. These flare jet packs are the most common type. They're offered in many configurations to accommodate virtually every nitrous system; plus, each jet is stamped with the orifice size for easy identification and selection. To meet your power and tuning needs, use Nitrous Outlet jets!
( 2 )
$442.99
JET Powr-Flo Throttle Bodies
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 111 )
$334.99
—
$489.99
JET Powr-Flo Mass Airflow Sensors
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$262.99
—
$393.99
JET Rochester 2G Stage 1 Carburetors
JET Rochester 2G Stage 1 carburetors are perfect for use in Circle Track racing. JET begins with a .130 in. needle and seat assembly for adequate fuel supply, and a small diameter float for maximum float blow volume. The cluster is then modified, based on engine and vehicle specs, to keep the fuel curve correct throughout the rpm range. Idle, transition, and accelerator pump circuits are modified for each specific application. The 2Gs are then tapped to accept Holley jets for ease of tuning, and finished with a 3/8 in. fuel inlet. Only the highest quality components are used throughout the assembly process as the 2Gs are returned to factory color and condition.
( 14 )
$429.99
JET Dynamic Spectrum Tuners
Designed for the performance enthusiast who wants total control of their vehicle's programming, JET Dynamic Spectrum Tuners are powerful tuning packages. Their DST software provides you with the tools needed for precise ECU performance tuning, using your laptop or PC. Use of this software will give you the ability to modify virtually every aspect of the vehicle's programming. The stock programming from the vehicle is initially downloaded and saved to your PC with the supplied JET interface cable that connects to the vehicle's diagnostic port. The stock programming can be reloaded to the computer at any time, to return the vehicle's ECU to its original state. The comprehensive, easy-to-use software allows extensive modification of the vehicle's software. This allows control of fuel and spark tables, speed and rev limiters, transmission functions, torque management tables, and many other functions. Modifications are made using detailed table and graph views for easy and accurate parameter editing. Your modifications are saved as a new file, and downloaded to the vehicle's computer.
( 23 )
$499.99
On Sale
PRW Q-Jet Carburetors
PRW Q-Jet carburetors are manufactured with all new components. They are a significant upgrade to stock GM carburetors for most GM automotive applications. Every carburetor is designed with precision engineering and cutting-edge features and are equipped with PRW's industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. They are available in 750 cfm for GM cars and trucks with engine sizes ranging from 283-350 cu. in. and 800 cfm for GM vehicles with engine sizes ranging from 350-455 cu. in.—both applications work well with a mild cam or headers for optimum street performance. Choose the PRW Q-Jet carburetor designed for your application needs. Key features: * All new—not rebuilt, or remanufactured * Available for 750 and 800 cfm applications * Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment to allow for precise tuning with ease * Universal replacement for most GM automotive applications * Includes most required vacuum ports * Complete with a one-wire electric choke * Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA * Compatible with "C" and "U" style throttle linkages suitable for stock intake manifolds
( 2 )
$699.89
$499.95
JET Stage 2 Computer Chips/Modules
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 112 )
$332.99
—
$341.99
JET Ford Computer Modules
These performance modules from JET will improve the performance of your Ford car or truck with very little work. Perfect for vehicles with little or no modifications, they're programmed for power increases under hard throttle conditions such as towing and wide-open throttle. They offer a full range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno-tested to ensure the most possible power without affecting drivability or fuel economy.
( 46 )
$334.99
JET Stage 1 Computer Chips/Modules
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$317.99
—
$340.99
MOMO Racing Jet Steering Wheels
MOMO Racing Jet steering wheels are engineered with track knowledge so you can pilot the streets. Aerospace-inspired carbon fiber details deliver a sporting attitude to the glossy accents of the MOMO Jet steering wheels. Perforated air leather covers in the handle's middle section help improve grip. To offset Jet's total black look, MOMO logos appear both stamped on the spoke and on the center horn button. A glossy carbon fiber-style ring surrounds the horn button. Available in 320mm and 350mm diameters, the MOMO Jet steering wheel gives you more options to fit your driving needs.
( 1 )
$308.99
JET Underdrive Pulley Kits
JET underdrive pulley sets reclaim lost horsepower and mileage by reducing the drag placed on the engine to drive the accessories, such as the air conditioning, power steering, and water pump. The pulleys slow down these accessories to allow the engine to turn with less effort without any adverse effect on the operation of A/C, power steering, charging, or cooling systems. Installation consists of simple bolt-on replacement of the stock pulleys. Kits include pulleys, hardware, complete instructions, and part number for new serpentine belt as most kits will require use of smaller size belt. Belt is not included with kit. The number and type of pulleys will vary per application.
( 12 )
$262.99
—
$358.99
JET Performance Programmers
JET Performance programmers let you take control and program your own vehicle computer to match your driving style. JET's exclusive Tri-Power tuning allows you to program for performance using lower cost regular octane fuel, or for optimal performance gains you can program for mid-grade or premium fuels. All three tuning modes are designed to operate the engine at peak efficiency based on the octane level being used to improve horsepower and mileage. The programmer will also correct your speedometer and turn off the ABS system trouble light if you change tire size or gear ratios. JET Performance programmers include a built-in scan tool to read and clear diagnostic trouble codes when your check engine light comes on saving you a costly trip to the dealer. The programmer simply plugs into the vehicle's diagnostic port under the dash and then the easy to use installation software allows you to make your changes by answering simple yes or no questions.
( 13 )
$395.99
—
$412.99
JET Xcelerator Throttle Enhancers
JET Xcelerator throttle enhancers are easy to install devices that modify the signal to your electronic throttle. This allow much quicker throttle response and removes that dreaded "throttle lag". No more slow response, you hit the pedal the vehicle responds! Multiple performance settings are available so you can adjust the throttle response for your driving style or upgrades. Also featuring a valet setting that restricts throttle response, and a security setting that removes the throttle signal all together.
( 29 )
$329.99
JET Air/Fuel Monitors
JET air/fuel monitors are available for any vehicle equipped with an oxygen sensor. They are designed for the driver who wants to monitor engine efficiency and fuel mileage. The JET air/fuel monitors feature a backlit LCD screen and eight different monitoring screens to choose from. This information can be used to fine-tune the vehicle for the best performance and mileage.
( 1 )
$267.99
JET Six Pack Performance Chips
Are you looking for a new performance chip but aren't sure which one to get? Now you don't have to worry--JET has taken away the guesswork with their Six Pack performance chips. They allow the driver to select from six different levels of performance with the push of a button. They include programs for economy, towing, Stage 1 and Stage 2 performance, valet mode, and security.
( 10 )
$288.99
—
$367.99
JET Bench Grinders
You won't believe how smoothly these JET bench grinders run! They are great power tools that show tremendous attention to detail. Well-built, with a powerful motor, these bench grinders are more than capable of handling any job that the average homeowner would encounter, as well as withstand the high-volume demands of even the busiest shops. These high-quality machines are designed to grind, sharpen, and smooth out rough material surfaces—delivering work power and pristine finishes! Additional features: * UL listed * Totally enclosed pre-lubricated ball bearings * Rubber mounts prevent movement * Cast iron wheel guards and dust vents * Includes aluminum oxide grinding wheel * One-piece quick-adjusting spark guards * Large eye shields with quick adjustment * Adjustable tool rests * Fine and coarse vitrified grinding wheels included
( 4 )
$307.99
—
$472.99
JET V-Force Plus Power Control Modules
These V-Force Plus power control modules are designed for the performance enthusiast who wants improved performance, acceleration, and the ability to monitor vehicle information. V-Force Plus power control modules are designed around a 20 MHz RISC processor. V-Force Plus power control modules optimize ignition advance and fuel maps for optimum horsepower and drivability. In addition, the software in the program allows you to select from 14 different screens to monitor throttle position, mass airflow, manifold pressure, fuel economy, and air/fuel ratio. This allows you to monitor your driving habits for the best fuel economy and performance.
( 12 )
$342.99
JET Lathe Chuck Sets
To complement JET's extensive line of wood-turning lathes, they offer a nickel-plated chuck with five unique sets of jaws, to keep projects securely on your lathe. The chuck set fits models JWL-1015, JWL-1221, JWL1440, or any lathe with a 1 in. x 8 TPI spindle thread. To fit JWL-1640 and JWL-1840 (or any 1 1/4 in. spindle thread) use the JET lathe chuck adaptor (part number: 719903). Lathe chuck adapter sold separately. Inside the custom JET molded case you will find: * (1) Nickel Plated Chuck 1 in. x 8 TPI * (1) 190mm Nickel Plated Face Plate with 16 Grip studs * (1) Nickel-Plated Pin jaws (inside grip range 5-43mm, outside grip range 22-60mm) * (1) No. 1 Round jaws (inside grip range 38-73mm, outside grip range 48-87mm) * (1) No. 2 Round jaws (inside grip range 66-100mm, outside grip range 77-117mm) * (1) Internal/external step jaws (inside grip range 8-43mm, outside grip range 20-78mm) * (2) Woodworm screws (1/2 in. and 3/8 in.) * (1) T-handle * (1) 100mm Hex wrench
Not Yet Reviewed
$457.99
JET Lever Hoists
JET lever hoists are designed to perform in light-duty industrial applications. They feature all-steel construction, dual-pawl Weston-style brake system, and Grade 80 load chain for durable reliability and safety. JET lever hoist features: * Industrial-rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation * Heat-treated load plates and case hardened corrosive-resistant internal parts extend the life of the hoist * Smaller body and lightweight design for confined areas and low headroom applications
Not Yet Reviewed
$354.99
