Availability
Showing In Stock Items. Show All 228 Items.
Competition Engineering floating housing mounts are designed for ladder bar rear suspensions using leaf springs. By allowing the axle to pivot independently of the leaf springs, they eliminate the binding of the rear suspension due to the opposing travel arcs of the ladder bars and leaf springs as the axle moves up and down.
( 2 )
$276.99
Eagle FSI I-beam connecting rods are forged strong from 4340 steel. They are fitted with 7/16 in. ARP 8740 cap screw-style rod bolts, alignment sleeves for precise cap location, and silicone bronze pin bushings. Sizing is performed using the Sunnen Kross grinding system and is weight-matched to +/- 1 gram. Get your modified pump-gas racing engines cranking with FSI I-beam connecting rods from Eagle.
( 18 )
$424.99
—
$486.99
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$267.99
—
$486.99
Summit Racing™ Performance 4340 forged steel connecting rods come in a variety of applications and options. From a light rod street-strip cruiser to a beefy rod for a 1500 hp big block, you will find just the rod for your combination. As always, Summit Racing™ connecting rods are packed with great features at the best prices. Options and features: * Chevy, Ford, Chrysler, and Pontiac * Big and small blocks * Multiple lengths * H-beams and I-beams * Through-bolts to cap-screws * Press-fit to full-floating * Multiple grades of rod bolts from 8740 through L-19
( 39 )
$319.99
—
$494.99
Why spend time and money reconditioning your stock rods—when you can upgrade to a set of Eagle SIR I-Beam connecting rods for less? They're forged from 5140 steel for outstanding strength and reliability, and they come in both press-fit and bushed pin models. Their lightweight design places less stress on the rest of your rotating assembly to increase engine life and better handle high-rpm use. The rods are X-rayed, sonic-tested, magnafluxed, and shot-peened to stress-relieve the metal. They come with 12-point ARP Wave-Lok rod bolts and are weight-matched to within two grams. The big end sizing is controlled by in-house CNC equipment to ensure precise machining and accurate fitment. Order the individual rod or set recommended for your year/make and engine application.
( 84 )
$364.99
—
$441.99
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 83 )
$367.99
—
$451.99
Get the most from your hard-earned dollars with Silv-O-Lite hypereutectic pistons. These pistons utilize aluminum alloy high in silicon for greater strength plus scuff and seizure resistance. Silv-O-Lite pistons have improved groove wear and resist cracking in the crown area where operating temperatures are severe. Silv-O-Lite hypereutectic pistons feature reinforced top lands and their proprietary process of diamond finished skirts. These aftermarket pistons are available for many applications from your light truck to your auto or import. Spend wisely and choose replacement pistons that will work hard for you--Silv-O-Lite hypereutectic pistons.
( 73 )
$250.99
—
$459.99
EBC Vee-Rotors front brake rotors offer riders the choice to customize their machines rather than simply replace parts. These exciting new rotors feature EBC's Vee design weight reducing profile mounted onto lightweight alloy center hubs using their patented SD square drive button technology, which prevents loosening and vibration. The fully floating design is hand-built of heat-treated and tempered stainless steel for the ultimate in stopping power and are inspected for accuracy and runout. The alloy hubs are offered in an exciting palette of colors applied through a special "fix" process that seals the color and minimizes color loss. Don't just replace, upgrade and customize your bike with colorful EBC Vee-Rotors.
( 3 )
$278.89
—
$302.20
EBC XC series brake rotors are the latest in brake disc technology and design from EBC. These brake rotors have a contoured front brake rotor ring installed on a fully floating brake disc hub. EBC XC series brake rotors are designed to increase brake effectiveness and help reduce brake disc weight.
( 2 )
$252.10
—
$267.22
EBC contoured oversize disc brake conversion kits have either a 250mm or 280mm oversize disc design with fully floating construction made from heat-treated stainless steel. These kits come complete with brackets and contoured rotors. Their larger design not only gives a significant improvement to stopping power, but also great modulation and control without the risk of grounding on excessively over-diameter units. These contoured rotors are quick and easy to fit, with beautifully crafted brackets made by Ted Devol. Longer brake lines may be required for the installation of EBC oversized disc brake rotors (sold separately).
( 2 )
$278.89
When you need strength for your custom axle job, Yukon Gear & Axle cut-to-fit axle shafts should be your choice. Built to last, these Yukon axles are offered in hardcore 4340 chromoly and 1541H alloy steel. Built to perform, they offer more strength than stock styles and come in your choice of cut-to-fit/cut-to-length designs. Choose quality-built strength for your application with Yukon Gear & Axle cut-to-fit axle shafts.
( 33 )
$272.99
—
$414.99
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 137 )
$258.99
—
$499.99
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. Yukon Gear & Axle 4340 chromoly axles provide up to 50 percent more strength than stock axles … critical for extreme performance applications with large tires, high torque and high horsepower. These 4340 axles are manufactured using the latest technologies and the highest quality materials for long life in off-road, street and track use. Yukon Gear & Axle 4340 chromoly axles are offered in complete kits or individually.
( 36 )
$332.99
—
$374.99
Scat Pro-Stock I-beam connecting rods incorporate all of the best features possible for an I-beam rod, including some strength-adders found in H-beam designs. They are profiled with clearance for long stroke applications. These connecting rods feature a one-rib cap design for added strength and bearing support, and special hollow dowels with ARP cap screw bolts to greatly increase strength and horsepower capabilities.
( 59 )
$401.99
—
$477.99
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 157 )
$250.99
—
$496.99
Wilwood Ultralite HP 32 vane rotor and hats extend the service life of brakes on heavier competition vehicles and other severe-duty applications. These replacement rotors are precision-machined to less than .001 in. tolerance for overall flatness, parallelism, and radial runout on Wilwood's long-grain carbon iron castings. Plus, their superior thermal conductivity and stability properties resist distortion and fatigue. For racing or everyday use, Wilwood Ultralite HP 32 vane rotor and hats are a great choice. Order the size, surface style, and bolt pattern needed for your application.
( 3 )
$308.71
—
$352.82
Trail-Gear Rock Assault 9 axle shafts have a tapered design that allow for more yield during extra-torque load letting them flex without breaking. They shafts are heat-treated for the ultimate strength.
Not Yet Reviewed
$328.92
EBC X Series brake rotors are complete bolt-on-and-go rotor assemblies. They are made with a sturdy riveted construction, forged aluminum center hubs, and high-friction stainless steel rotor rings. These EBC X Series brake rotors are the perfect choice for you, whether you need an OEM replacement or want to upgrade your brake rotors.
( 2 )
$256.95
EBC oversize SuperMoto disc conversions kits have 320mm oversize Supermoto discs and are constructed with a forged alloy center hub for weight reduction. These conversion kits are billet steel with a 4mm thick brake rotor for maximum stopping power. The rotor rings have extra weight-reducing scraper holes that are riveted together with a 9-button sturdy rivet system. These rotors come complete with anodized alloy relocation brackets for various models and are supplied with the complete rotor unit. These rotor conversions will require longer brake hose to complete the installation.
( 3 )
$279.51
—
$296.28
Lead the way with strong Carrillo Pro-H connecting rods. Able to handle the most abusive forces of your race engine, these straight H-beams are the stoutest configurations available. Obsessed with perfection, Carrillo produces their Pro-H connecting rods in small batches. They mesh quality materials, precision forging, excellent craftsmanship, and high-tech designs to deliver a flawless performance for your race engine. Applications are available for many venues of motorsports. Drive your racer to the winner's circle with the high performance "choice connection"--Carrillo Pro-H straight H-beam connecting rods.
( 3 )
$371.44
—
$435.49
New rotors go a long way to increase your stopping power. EBC wide band contoured series rotors will keep your motorcycle's braking distance down when paired with good pads. They have a contoured profile and slotted rotor profile to improve pad break-in and reduce rotor damage, also called rotor galling. Find the best fit for your motorcycle here and keep riding safe with EBC rotors maintaining your stopping power.
Not Yet Reviewed
$261.58
EBC custom rotors feature stainless steel brake rotor rings/blades and a polished stainless steel center hub. These EBC custom rotors are contoured with a slotted profile, which greatly improves pad break-in and reduces rotor damage (rotor galling). EBC opted for stainless steel center hubs due to the weight and heavy-duty nature of larger American motorcycles that often use twin-cylinder technology, which can lead to more vibration or frame shake. All components are stainless, including rivets, washers, and spring pressure washers. Plus, both the hub and the rotor blade are made from stainless steel, so you'll have no more rusty rotors with EBC's custom rotors.
Not Yet Reviewed
$267.22
Are you tired of losing braking feel from a bent OE rotor? EBC street replacement brake rotors are your fix! These rotors are manufactured from high-quality materials and are guaranteed to give you pristine stopping performance. EBC street replacement brake rotors are designed to fit directly onto your OE hub, leaving you worry-free when it comes time for installation. Get back on the open road and stop your street warrior like it did when it came from the factory. EBC street replacement brake rotors help dissipate heat and keep your brake pads from excessive wear.
( 13 )
$256.95
—
$367.09
Mahle Original aftermarket replacement pistons have great features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Some include hard anodized ring lands, and coatings on the skirts and crowns. Choose the model designed for your vehicle and engine application.
( 2 )
$250.99
—
$495.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
