Availability
Showing In Stock Items. Show All 917 Items.
On Sale
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 37 )
$549.95
$493.95
Lokar drive-by-wire electronic throttle controls are the first programmable electronic throttle controls for the automotive aftermarket. These billet aluminum controls feature a non-contact, solid-state Hall effect sensor and are available, pre-programmed, from the factory for most GM, Ford, and Mopar applications. These controls are programmed to optimize electrical output for quicker throttle response, producing no pedal lag and three times the performance of OEM pedals. They also offer improved operator control and pedal stability over rough terrain making them ideal for high performance and off-road applications. The controls include an application-specific pedal wiring harness that works in conjunction with the OEM or aftermarket EFI wiring harnesses. These Lokar electronic throttle controls are available with a brite or black anodized finish and are designed for use with one of Lokar's drive-by-wire pedal assemblies which are sold separately and available in a variety of styles and finishes to match your custom application.
( 8 )
$594.95
Lingenfelter timing retard launch controllers can be used to provide consistent launch rpm off of the line in drag racing and other standing start racing applications. In turbocharged applications, they can help build additional boost off of the line. The controllers can also be used as an adjustable individual cylinder rpm limiter, providing reliable and fast-acting, spark-based engine rpm limit control.
( 28 )
$300.15
—
$446.45
Lingenfelter LNC-003 2-step adjustable launch controllers allow you to direct primary and secondary rpm limit settings. These dual spark-based rpm limiters will help provide consistent launch rpm, as well as the ability to load the engine to help build additional boost off the line. They can also be used as adjustable individual cylinder rpm limiters—especially useful with auxiliary fuel control systems where it's nearly impossible to make sure both the factory and auxiliary systems turn off fuel at the exact same time. Make your LSX-based engine and ignition system really perform at the drag strip with Lingenfelter LNC-003 2-step adjustable launch controllers.
( 6 )
$303.95
—
$303.99
Summit Bucks
Z Automotive TranZformer electronic shift kits transform your car into a neck-snapping, tire-chirping fun to drive beast that at the press of a button, returns to stock. Best of all, they're completely hidden. Available in Gen 1 or Gen 2 kits, you can have your NAG1 transmission shift how YOU want it to. You get to modify shift firmness to fit your driving style/mood, plus a lot more. They install in minutes, connecting via wiretaps into wires hidden behind the steering column lower cover. Once installed, TranZformer kits will modify transmission parameters for that real "old school" muscle car shift feel. Chirp through gear shifts or just firm them up a little for towing or for track use; use your steering wheel buttons and EVIC screen (or cruise stalk/buttons for those without EVIC) to adjust shift firmness on-the-fly, whenever you want; connect to your PC via USB cable to dial-in independent upshift and downshift boost percentages (0 to 100) for each gear in both Drive and AutoStick mode. You can reduce the time delay when shifting into Reverse and Drive, adjust shift firmness scaling based on throttle position, and reset or kill the TCM's adaptive learning system, keeping the TCM from dialing back the shift firmness over time. Select the kit designed for your vehicle. Some of the features and benefits (may vary by kit): * Z Automotive Programming Utility (for Windows PCs only) allows you to program shift parameters, view status, update the firmware, and more * Steering wheel shifting (SWS) allows you to use your steering wheel's buttons to manually control gear shift while keeping your hands on the wheel * AutoUpshift allows you to set your own shift points when in AutoStick * Line Lock mode holds the vehicle with the front brakes so you can hit the gas and do a perfect burnout Peak rpm display: Will display actual shift rpms after each shift--great when adjusting auto upshift to squeeze every last bit out of that high revving cam, or to check what rpm you hit when shifting manually * 0 to 30 and 0 to 60 timer Reset adaptives: Will reset TCM adaptives any time you wish
Not Yet Reviewed
$289.00
On Sale
Change your vehicle's ignition timing without leaving the driver's seat with one of these MSD adjustable timing controls. They're designed to fit virtually all vehicles with a 12 V negative-ground ignition, a distributor, and an externally mounted coil. They feature a knob that mounts to the dash for easy and accurate timing adjustments, allowing you to adjust timing up to 15 degrees to compensate for bad gas, altitude changes, and heavy loads.
( 18 )
$299.95
$269.95
TransGo automatic transmission reprogramming kits are designed with performance in mind. Most, but not all models contain additional features like Gear Command that allows you to hold manual low to any speed, and shift back to low at any speed. They are great for strip cars or 4x4 rock crawlers needing to select low and not have it upshift. Most TransGo automatic transmission reprogramming kits can be tuned for HD (Heavy Duty) use by following the recommendations in the kits.
( 39 )
$295.71
On Sale
aFe Control suspension logic ESD kits contain simple plug-and-play modules that eliminate the suspension control check engine light. This allows installation of aftermarket shocks or coilovers on vehicles previously equipped with electronic shock absorbers. ESD (electronic shock delete) kits are sold in sets of four, one for each shock, and feature anodized extruded aluminum heat sinks, abrasion-resistant braided wiring shields, and GM-style Metri-Pack connectors.
( 1 )
$372.00
—
$433.00
$334.80
—
$389.70
On Sale
As LS engines make their way onto the race track MSD is ready with the Circle Track LS ignition controls. You're off to the races with MSD. Circle Track LS ignition controls feature: * Direct plug-in to factory GM LS sensors and coils * Preprogrammed to run the GM CT525 crate engine out of the box * Laptop programmable rpm limit, timing curve, and coil selection for custom tuning * Auto detects coils, cam sensor, and crank sensor * Will run 24x 1x, 58x 1x, and 58x 4x crank/cam sensor combinations * Self-powered with USB for laptop programming * Steady, accurate timing control * Dedicated plug for Tech Official
Not Yet Reviewed
$549.95
$493.95
Sierra Marine Delco EST conversion kits upgrade GM engines with conventional ignition systems to electronic. They are offered for 4-, 6-, and 8-cylinder engines. Sierra Marine Delco EST kits include: * Delco EST (Electronic Spark Timing) distributor * Coil * Ignition wires * Harnesses
( 3 )
$456.99
—
$500.99
MSD three-stage retard controls allow you to retard your ignition timing in three different stages. You can activate one retard for a nitrous stage, and another at top-end in high gear for more mph, and still have another module left over for dual-stage nitrous systems. When activated together, the retard amounts are cumulative, so you get the total of the three. For example, if you pull 2 degrees, then 4 degrees on the second stage, and another 2 degrees at top-end, the total retard is 8 degrees (2+4+2=8). In addition to the individual retard stages, the Three Stage retard controls have an optional start retard function that retards the timing 10 or 25 degrees while cranking the engine. This makes starting high-compression engines with locked-out timing, such as crank trigger systems, much easier. These units easily connect to your MSD Ignition and can be triggered from points, electronic ignitions, crank triggers, or magnetic pickup distributors. They're supplied with a 2, 3, and 4 degree module, and must be used with an MSD 6, SCI, 7, 8, or 10 Series ignition.
( 4 )
$499.95
On Sale
MSD digital multi-retard timing controls provide four different stages of retard, along with an adjustable start retard feature--with no modules! These units use a high-speed RISC micro-controller to direct the timing functions. This controller can make extremely quick compensations to the timing, while maintaining accuracy to within 1 degree. These circuits are thoroughly de-bounced and isolated for protection against Electro Magnetic Interference (EMI). There is also an innovative magnetic pickup compensation circuit built-in to allow for rock-steady timing with a variety of different mag pickups. There are four separate retard stages that can be activated independently or together for a total sum of retards. Each stage is adjustable from 0-9 degrees, and a maximum of 20 degrees of retard can be pulled out. On top of these great features, there is also an optional start retard circuit that can be programmed to retard the timing 5, 10, 15, or 20 degrees during cranking. Digital multi-retard timing controls can be used on 4, 6, or 8-cylinder engines, and must be used with an MSD ignition control.
( 2 )
$499.95
$274.95
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$255.65
—
$542.65
KW cancellation kits eliminate persistent trouble codes that exist when upgrading a suspension on a vehicle with electronically regulated dampers. KW offers the only solutions whereby the serial damper regulation is shut down and, at the same time, trouble codes get avoided. The functioning of your control unit remains completely intact. Upgrade your advanced suspension the easy way with an assist from KW cancellation kits, available for a variety of applications, such as Chevy Corvette and Audi models.
Not Yet Reviewed
$493.95
On Sale
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$368.95
$332.05
On Sale
For fast response times, AEM X-Series wideband UEGO air/fuel sensor controller gauges are a great option! Built on the unique, patent-pending X-Digital technology, they report accurate information quickly— enabling you to tune your engine more efficiently. These gauges have modern, visually striking faceplates with 7-segment center displays that are 87 percent larger. They're ultra-slim and come with black bezels and black dual-faced faceplates for air/fuel and Lambda. The displays are user-configurable and feature auto-dimming. Additional features: * Bosch 4.9LSU wideband UEGO sensor * Factory-calibrated resistor does not require free-air calibration—but technology allows for free-air calibration as sensor ages, if user desires * Compatible with vehicle/system voltages up to 16 V * 0-5 V and RS232 output for data-logging and feedback control * AEMnet (CANbus) for data-logging and daisy-chaining multiple controllers up to 16 cylinders * Can display AFR values in hundredths of a percent * 52mm gauge diameter and slim 0.825 in. gauge depth * Gauge cup depth only .200 in. deep * Locking connectors
( 210 )
$279.95
$251.95
On Sale
aFe Control Suspension Logic ESD modules will allow you to take your truck to the next level of off-road performance. When you're ready to upgrade with aftermarket shocks, such as aFe's Sway-A-Way 3.0 shocks, their Electronic Shock Delete (ESD) modules ensure a seamless install without triggering any error codes. You'll retain full access to all drive modes, including BAJA mode with its dynamic engine calibrations and off-road-tailored system tuning. Even if you plan on retaining the electronic shock system, having this module on hand during your off-road adventures will provide invaluable peace of mind. If a shock becomes damaged, or an electrical sensor is compromised, your truck may enter a faulted state, and leave your truck in reduced power mode. If this happens, you can quickly resolve the issue by plugging in aFe's ESD module, instantly restoring your truck's full functionality. aFe Control Suspension Logic ESD modules are quick and simple, plug-and-play upgrades that allow you to experience the full potential of your truck.
Not Yet Reviewed
$350.00
$315.00
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$272.10
—
$280.10
On Sale
Get on the performance grid with MSD Ignition Power Grid power modules. When connected to the Power Grid, they will data log all the functions--including time from launch and time or rpm of activation and deactivation. These timing controllers feature four high-current, solid-state switches that can be configured independently or in conjunction by time, rpm, and temperature switching on/off, as well as by percentage for nitrous systems. Each channel is capable of handling 20 amps of current without the use of a relay and can be used to activate fan, fuel pump, nitrous oxide system, throttle stop, and more--the possibilities are endless.
( 1 )
$749.95
$412.95
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$255.65
—
$272.10
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$255.65
—
$525.90
On Sale
aFe ShiftLogic modules greatly improve the transmission shift feel in your diesel rig. The modules modify the transmission line pressure, resulting in improved shift firmness and reduced transmission slippage. They also reduce fluid temperature and extend the life of your transmission. aFe ShiftLogic modules have three different settings to personalize your shift feel, and the adjustment can easily be done with a simple push of the module button. aFe ShiftLogic modules feature: * Plug-and-play installation; no cutting or splicing wires * Ideal for performance driving and towing applications * Works with stock or modified transmissions * Adjustable LED settings; no LED—Stock, orange LED—Stage 1, red LED—Stage 2
Not Yet Reviewed
$408.00
$367.20
Dakota Digital presents the missing link between your cable-driven speedometer and late model electronic transmission! Measuring 5 1/2 in. x 3 1/2 in. x 2 in., these adapters allow a mechanical-cable speedometer to be used in conjunction with a modern drivetrain which provides only an electronic output. The units use PID control of the cable speed to provide quick, smooth operation, as well as prevent overdriving or damage to the speedometer needle. Consider these adapters as the most precise and easiest to use cable-drive units on the market. Additional features of Dakota Digital electronic signal to mechanical cable drive adapters: * 36 in. cable available for GM thread-on, GM clip-on, and Ford clip-on style speedometers (select preferred model) * Powerful motor is quiet enough to mount the module inside the cabin * Waterproof case can also be mounted under the hood, or even inside a fenderwell * Bluetooth-enabled to sync with available mobile app for stone-simple set up * Supplied programming switch and LED readout make setup easy * For OBD-II equipped vehicles; the supplied pigtail will easily plug into the DLC, simplifying the wiring connections
( 16 )
$380.00
On Sale
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$380.95
$342.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
