Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
91 Results Found For "4l60e"
Showing In Stock Items. Show All 122 Items.
TransGo Performance Shift Kits
TransGo's Performance shift kits give you the hard-launching, tire-blazing shifts you want, after just a few hours' work with basic hand tools. TransGo even has kits for computer-controlled, 4-speed automatics. Their performance shift kits can be installed with the transmission in the vehicle and they come with complete instructions. Some kits even include a step-by-step video to walk you through the installation process.
( 508 )
$287.61
Advance Adapters 4L60E Transmission Reluctor Kits
Advance Adapters 4L60E transmission reluctor kits provide a one-to-one reading on the 4L60E output shaft, even if the transfer case is in a low range. The kits include a vehicle speed sensor, a clamp-on tone ring, installation hardware, and instructions. Advance Adapters provides 4L60E transmission reluctor kits for their output shafts and stock GM versions.
( 3 )
$267.71
Holley Sniper Transmission Controller Harnesses
Holley Sniper offers transmission-specific controller harnesses for a variety of GM and Ford automatic transmission models. The plug-and-play harnesses are pre-terminated with j4 connectors. Order the harness recommended for your EFI application.
( 2 )
$306.95
Summit Racing™ Torque Converters
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 365 )
$359.99
—
$443.99
B&M Tork Master Torque Converters
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$460.95
—
$483.95
Summit Racing™ Automatic Transmission Rebuild Kits
On average, transmissions last between 30,000 to 50,000 miles before requiring maintenance. When that milestone occurs, Summit Racing™ offers automatic transmission rebuild kits for more than a dozen transmission models spanning a half-century. The kits include all-new clutches, oil seals, gaskets, lip seals, and a transmission filter. These rebuild components are an economical way to restore performance. Order the kit recommended for your application.
( 35 )
$292.99
Boss Hog LS Night Stalker Torque Converters
Boss Hog LS Night Stalker Series torque converters can take you from towing to rock crawling. They're offered in four levels to perfect your performance needs and designed to handle as much as 500 hp. The Boss Hogs use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. From stock to mildly modified LS-based engine equipped vehicles, the Stalker Series torque converters offer performance that is tough and reliable. With multiple models available, order the converter recommended for your transmission application.
( 30 )
$390.05
—
$458.68
Winters Sidewinder Standard Automatic Shifters
The durable, jam-proof design of Winters Sidewinder standard automatic shifters enables you to slam gears--while the fail-safe gate layout makes it impossible to accidentally shift into reverse. The units are available in standard forward or reverse shift patterns and include linkage hardware and 5 ft. shifter cable. Winters shifters are ready to install on various GM, Ford, and Chrysler models equipped with automatic transmissions.
( 169 )
$273.99
—
$283.99
Summit Racing™ Dual-Exhaust Transmission Crossmembers
Summit Racing™ steel transmission crossmembers allow you to run a true dual-exhaust system with most popular GM transmissions. They have a patented double-hump design, so you don't have to compromise ground clearance by running pipes under the crossmember, and they're a complete bolt-on deal—no custom fabricating or realignment is needed. The parts are made from 1/8 in. thick boxed tubing to handle the frame-twisting power of big blocks. Order the crossmember recommended for your vehicle and transmission application.
( 591 )
$275.99
—
$349.99
Advance Adapters 6-Bolt to 4-Bolt Tailshaft Adapters
Advance Adapters 6-bolt to 4-bolt tailshaft adapters are designed for 1996 and newer electronically controlled GM 4L60E transmissions with a hex bolt pattern on the output side of the transmission. They provide a 700R-style pattern for easy fitment of other adapters produced by Advance Adapters, and are 1.500 in. long. The heart of these systems lie in the new clamp-on reluctor ring and sensor which sends a 40 pulse per output revolution signal to the drivetrain control module. These adapters are manufactured from 356 T-6 heat-treated aluminum alloy and also include a GM VSS sensor, fastening hardware, and instructions. Make adding adapters and/or a transfer case easier with Advance Adapters 6-bolt to 4-bolt tailshaft adapters.
( 14 )
$305.97
Lokar Case-Mount Automatic Transmission Shifters
When you order a Lokar shifter, you know you're buying quality. These Lokar case-mount automatic transmission shifters are built to deliver outstanding performance and safety with their patented Safety Lock-Out button. The button prevents accidental shifting from park into reverse, drive, and low gears. Other important features include: * Neutral safety switch * Completely adjustable mounting bracket that allows for a wide range of installation positions * Available in a variety of styles and finishes
( 61 )
$455.95
—
$490.95
Summit Racing™ High Performance Automatic Transmission Rebuild Kits
Summit Racing™ high performance automatic transmission rebuild kits feature the necessary parts to get your transmission working more efficiently than ever. Available for a variety of transmissions, the Summit Racing™ high performance automatic transmission rebuild kits are an excellent choice for increased durability and performance. Kits include: * Alto Red clutches * Kolene coated or Premium Steels * High performance band * High performance transmission filter * Bushing kit * Oil seals * Gaskets * Lip seals
( 65 )
$327.99
—
$413.99
TCI Master Racing Overhaul Kits
These TCI transmission Master Racing overhaul kits are designed for racers who maintain their own transmissions. They contain parts that are required when freshening up an existing competition transmission. You'll receive the high performance filter, clutches, steels, seals, gaskets, and bushings normally replaced during a rebuild. In addition, kits for late model GM overdrive transmissions also include a new performance band.
( 58 )
$285.95
DIYAutoTune MicroSquirt CAN Transmission Controllers
DIYAutoTune MicroSquirt CAN transmission controllers with sub-harness seamlessly control your transmission. They provide a simple, plug-and-play integration with MS3-Pro, and directly mates with their LSx drop-on harnesses. They are available with a 4L80E or 4L60E sub-harness. Included with your DIYAutoTune MicroSquirt controllers: * 6-pin black connector for power, ground, and CAN bus * 8-pin gray connector for additional inputs * 18 crimp pins for the above connectors Note: * Harness for GM 4L60E transmissions with or without the LUF (lock up feel) control solenoid. You can also wire the harness to communicate with an MS2, another MicroSquirt EMS, MS3-Pro, or MS3 over the CAN bus. * Harness for GM 4L80E transmission includes wiring for the input shaft speed sensor, and can be used as a standalone transmission control solution with minimal wiring involved. But was designed to be a full plug-and-play, zero wiring solution with DIY 24x and 58x harnesses.
( 5 )
$499.99
Lokar Floor Mount Automatic Transmission Shifters
Lokar's floor mount automatic transmission shifters follow in the footsteps of their parent transmission mount and tailmount shifters, having been designed with the same superior craftsmanship. The exclusive floor mount brackets allow for installation above or below the floor on the transmission tunnel. These kits include a quad arm with quad arm offsets for mounting to the right or left. Removal of the transmission is not necessary. The floor mount shifters are equipped with all of the expected safety features of a Lokar shifter. Many options are available, including transmission application.
( 44 )
$425.95
Sonnax Heavy-Duty Automatic Transmission Clutch Hubs
Sonnax heavy-duty automatic transmission clutch hubs eliminate hub failure. These overrun clutch hubs feature high-strength steel and thicker material for trouble-free performance when applying deceleration engine braking in D3, D2, or D1 ranges. Ready your transmission for high performance applications, such as autocross, with Sonnax heavy-duty clutch hubs. Additional info: * Two times thicker than OE clutch hubs to prevent cracking and breaking in critical areas that engage the input sprag inner race * Manufactured from high-strength 4140 chromoly steel
( 2 )
$281.31
MSD Atomic Transmission Control Module Harnesses
Hoop up your Atomic TCU with MSD Atomic transmission control module harnesses. They are designed to fit your specific transmission model and have the proper wiring connector for a direct fit.
( 7 )
$280.95
On Sale
Hooker Blackheart Transmission Crossmembers
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 28 )
$373.95
—
$460.95
On Sale
B&M Automatic Transmission Deep Pans
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 373 )
$393.95
Holley GM Transmission Wiring Harnesses
Holley GM transmission wiring harnesses are designed to work in conjunction with Holley Dominator EFI fuel injection systems. These application-specific complete terminated harnesses come with a J4 connector to operate General Motors electronic transmissions. For all of your transmission management systems and accessory needs, go with Holley.
Not Yet Reviewed
$286.95
UMI Performance Torque Arm Relocation Kits
UMI Performance torque arm relocation kits are designed to remove the front mounting point of the torque arm off of the transmission and protect the tailshaft from damage. General Motors' tailshaft mounted design works great for a stock-driven vehicle; however, it is not designed to take abuse and hard launches. UMI Performance torque arm relocation kits replace your transmission crossmember with a new, stronger setup with a built-in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock-style aftermarket torque arm, as well as with the factory torque arm. These units are built using rectangular mild steel tubing and 0.188 in. mild steel mounting plates and they include all hardware needed for installation. The torque arm mount is machined from 0.250 in. thick mild steel and features a new clamshell for appropriately attaching the torque arm to the new crossmember.
( 40 )
$269.99
Haltech Nexus Ti4L Transmission Interface Kits
Haltech Nexus Ti4L transmission interface kits allow easy control of GM's popular 4L series of automatic transmissions. Designed as an add-on transmission controller expansion module for the NEXUS ECU and VCU range, the Ti4L will be programmed via the HalTech NSP software, or Rebel LS users will be able to follow the simple setup wizard in the Haltech Connect app. Easy set-up is not the only feature! They have also developed smart long-term learning strategies via closed-loop line pressure control, which means shifting gets better the more you drive. Features include: * Plug-and-play with Nexus Rebel LS terminated harnesses * Easy setup wizard for Rebel LS ECU * Programming and setup via NSP Software or Haltech Connect app * Long-term learning strategies via closed-loop line pressure control * Haltech 500 psi pressure sensor included Compatibilty: * Haltech Nexus Series ECUs and VCUs, including Rebel LS * GM 4L60E * GM 4L65E * GM 4L70E (non-4x4 2006-08 only) * GM 4L80E * GM 4L85E nNon 4x4 1994 and newer only) Note: Does not support Haltech Elite/Platinum/Legacy ECUs
Not Yet Reviewed
$457.99
Hughes Performance Street Rod Torque Converters
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$494.99
Boss Hog Night Stalker Torque Converters
Boss Hog Night Stalker Series torque converters can take you from towing to rock crawling. They're offered in four levels to perfect your performance needs and designed to handle as much as 500 hp. The Boss Hogs use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. From stock to mildly modified vehicles, the Stalker Series torque converters offer performance that is tough and reliable. Over a hundred models are available; order the converter recommended for your transmission application.
( 137 )
$388.32
—
$497.96
