Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
177 Results Found For "controller"
Showing In Stock Items. Show All 202 Items.
Not Showing Customizable Items. View Customizable Items.
On Sale
MSD Digital 6AL Ignition Controllers
Advance with the digital power of your popular favorite--MSD 6AL ignitions. With less power draw and higher output, MSD moves you with "the fire to drive" in a digital powerhouse! Inside microprocessors, updated circuits and efficient components monitor and handle every firing and rev limit to produce more power while pulling less current. Don't worry; features that made their 6AL boxes your first choice remain but with improved output--more than135mJ of spark energy for every firing with 530+ volts to the coil! And, to go with the new power, a new look. These digital 6AL ignition controllers are sleek with a lower profile. Wiring is routed out one end through a sealed and locked connector and two rotary dials to set rpm limit are positioned right on top--easier installation, super easy access and a clean, neat appearance under the hood. Controllers are supplied with wiring harness and components you need for install plus, vibration mounts. Increased output and proven multiple-spark power--MSD digital 6AL ignition controllers are a definite win-win!
( 434 )
$349.95
—
$354.95
$314.95
—
$319.45
On Sale
AEM Electronics Tru-BoostX Gauge-Type Controller Kits
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$389.95
$350.95
On Sale
MSD LS 2-Step Launch Controls
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for LS engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the rpm stays at a consistent level, producing consistent launches.
( 86 )
$357.95
$322.15
On Sale
Tuff Country EZ-Ride Control Arms
Tuff Country's EZ-Ride control arms are designed for use with your EZ-Ride suspension. They work with the other components in your EZ-Ride suspension kit to provide a quality lift without a harsh ride. Get the right control arms for your EZ-Ride lift kit from Tuff Country.
( 5 )
$326.99
$294.29
On Sale
Tuff Country Uni-Ball Control Arms
Tuff Country EZ-Ride Suspension's uni-ball upper control arms for lifted trucks will greatly reduce binding caused by less flexible standard versions, while also providing additional suspension travel. They make a great addition to your existing 2 in. to 4 in. suspension lift kit—or as an option in Tuff Country complete lift kits for some models. Give your customized ride the highly increased flexibility and durability it deserves with the Tuff Country uni-ball control arms designed for your application! More product features and items include: * 30 to 35 percent more suspension articulation * Corrects front end geometry on lifted vehicles * High-quality PTFE-lined FK uni-ball joints * Polyurethane bushings
Not Yet Reviewed
$395.99
$356.39
On Sale
REKUDO Front Lower Control Arms
REKUDO front lower control arms are one part of a fully engineered suspension system for the 1970-81 Chevrolet Camaro and Pontiac Firebird. The systems are modern auto-cross inspired suspensions that retain the OE appearance and strength with stamped steel control arms. REKUDO front lower control arms feature an EDP coating, heavy-duty ball joints, offset washer inserts for easy caster adjustment, and factory-style rubber bushings. Gain better performance and an improved camber curve with REKUDO front control arm systems. Features: * Lowered center of gravity with improved handling * Easy caster adjustment with offset oval shaped washers that fit into the upper control arm pivot shafts—proper caster setup improves stability and driver confidence on corner entry * Heavy-duty ball joints and rubber bushings are pre-installed * Black EDP (Electro-Deposit Primer) coating for corrosion protection * Easy bolt-on installation utilizing the factory mounts Please note: * Must be used with tall spindles RK600-02 and 1968-82 C3 Corvette brakes. Ideal for use with all other REKUDO Suspension System components for the 2nd Gen F-body * Optional Delrin® bushings available separately (RK100-20) * C3 Corvette-style brakes require 15 in. minimum diameter wheels
Not Yet Reviewed
$605.95
$342.22
On Sale
Tuff Country Standard Control Arms
Improve your lifted vehicle's suspension travel and performance with Tuff Country high-quality upper control arms (UCA). Designed specifically for vehicles with 2 to 4 ins. of front lift, these standard control arms will restore proper geometry and alignment which will improve driving, handling characteristics, and suspension articulation. Tuff Country standard control arms are powdercoated for added durability, and include ball joints, polyurethane bushings, and zerk fittings for simple lubrication.
Not Yet Reviewed
$378.99
$341.09
On Sale
MSD Adjustable Timing Controls
Change your vehicle's ignition timing without leaving the driver's seat with one of these MSD adjustable timing controls. They're designed to fit virtually all vehicles with a 12 V negative-ground ignition, a distributor, and an externally mounted coil. They feature a knob that mounts to the dash for easy and accurate timing adjustments, allowing you to adjust timing up to 15 degrees to compensate for bad gas, altitude changes, and heavy loads.
( 18 )
$306.95
$276.25
On Sale
Holley Boost Control Solenoids
Holley boost control solenoids are designed for optimal performance when using the boost control function of Holley EFI. Some setups require two solenoids and some require one. They're driven by a Pulse Width Modulated (PWM) output of the ECU. It is advised NOT to use the PWM+ outputs on a Holley HP ECU, but rather use the PWM- outputs. If you have a Holley Dominator ECU, use either the PWM- outputs or a PWM+ output on the J2B connector.
( 4 )
$460.95
$413.95
On Sale
REDARC Tow-Pro Trail Electric Brake Controllers
REDARC offers Tow-Pro Trail electric brake controllers for a variety of applications, including many Jeep, Ford, Ram, Nissan, Toyota, and Lexus trucks and vans from 1999 and up. These controllers are designed to suit most common trailer braking applications. They require minimal dash space and are simple to install and operate. The Tow‑Pro Trail has selectable Everyday or Manual Off‑Road trailer braking modes that allow you to choose the braking style depending on the road or terrain conditions, vehicle type, or driver preference. The Tow‑Pro Trail features Active Calibration which constantly monitors the direction of travel and will even calibrate with no trailer attached—and can be mounted in any orientation. The unit is able to operate electric trailer brakes from either 12 V or 24 V vehicle systems without the need for manual selection or extra components or wiring. The unit is able to operate electric/hydraulic trailer brakes from 12 V vehicle systems. Additional product notes: * Conquer any off-road adventure and tow safely without limits. Tow-Pro Trail helps keep your family, cargo, and vehicle safe while towing * REDARC's Tow-Pro Trail kit is the ultimate plug-and-play brake controller solution, specially designed to enhance your off-road adventures with your Jeep Wrangler, Rubicon, Gladiator, and other vehicles * Engineered and tested for off-road adventures, the Tow-Pro Trail helps you tackle challenging conditions such as steep descents, mud, and sand, as well as providing smooth, safe braking for everyday hauling * The Tow-Pro Trail Kit ensures you're ready to tow over any terrain, anywhere, anytime
( 2 )
$320.00
$272.00
On Sale
B&M Remote Throttle Position Sensors
Get that stout performance you've always craved out of your automatic transmission with the installation of a B&M remote throttle position sensor! Designed for use with carbureted engines, B&M throttle position sensors are for use with B&M's automatic transmission controllers (sold separately). B&M throttle position sensors feature a simple three-wire design, making it easier to install. The adjustable cable allows for various mounting locations on your engine, and the supplied bracket provides a place to mount the throttle cable, as well as providing a more professional looking appearance.
( 2 )
$334.95
$301.45
On Sale
MSD Power Grid System Controllers
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$377.95
$340.15
On Sale
Nitrous Outlet ProMax Dual-Channel Progressive Controllers
Nitrous Outlet ProMax Dual-Channel Progressive Controllers incorporate the system activation and safety functions of the WinMax—but adds numerous tuning and traction features that help you get the most out of your nitrous system. With the ProMax you can set rpm, time-based, or boost referencing progressive ramps for multiple stages while integrating wideband inputs. Additional features and benefits include: * Inputs for vehicle speed, trans-brake, MAP sensor, two wideband oxygen sensors, two nitrous pressure sensors, and one fuel pressure sensor * Two built-in 70 amp solenoid drivers can control two stages independently, or can be configured for closed-loop fuel control based on wideband oxygen input—with nitrous on one output and fuel on the second output * Progressive stage controls allow: adjustable frequency output of 10-30 Hz (by 1 Hz) for driving solenoids * Ability to be configured to vary solenoid duty cycle as a function of time, throttle percent (TPS), engine rpm, vehicle speed, manifold pressure (MAP) * Ability to set response of stage based on secondary arm switch input (arm/disarm) * Resume and restart feature option for controller—to resume an interrupted time-based ramp or start over based on TPS going out of range * Built-in rpm window switch with gear lockout feature * TPS or WOT switch activation * Data logging capable * Updateable Firmware * CAN Bus output * Two ignition retard outputs * Simple USB connection to PC/laptop * Optional 4.3 in. full touch screen display allows viewing of real-time data * Saved data logs can only be viewed on PC/laptop * Can save up to five different tuneups * Controller can be programmed via PC/laptop or optional display
Not Yet Reviewed
$600.99
$480.79
On Sale
MSD Power Grid Power Modules
Get on the performance grid with MSD Ignition Power Grid power modules. When connected to the Power Grid, they will data log all the functions--including time from launch and time or rpm of activation and deactivation. These timing controllers feature four high-current, solid-state switches that can be configured independently or in conjunction by time, rpm, and temperature switching on/off, as well as by percentage for nitrous systems. Each channel is capable of handling 20 amps of current without the use of a relay and can be used to activate fan, fuel pump, nitrous oxide system, throttle stop, and more--the possibilities are endless.
( 1 )
$749.95
$422.86
On Sale
BD Diesel Pressure Controllers
BD Diesel pressure controllers are designed to prevent midrange torque converter shudder and clutch/band slippage. The controllers feature three different levels that increase mainline pressure by mimicking higher throttle positions. Transmission function is improved and lugging is alleviated with the added feature of a slight hold or delay in shifting. This eliminates all shuttle shifting with light throttle—and reduces shift flare and gear hunting. BD Diesel pressure controllers have higher pressure, more elaborate control, and an easy factory plug-in installation. Order the model designed for your vehicle, engine, and transmission application.
Not Yet Reviewed
$329.95
—
$360.95
$296.96
—
$324.86
On Sale
Holley Sniper 3.5 in. LCD Touch Screen Controller
The Holley Sniper 3.5 in. LCD touch screen controller gives you access to a wide range of tuning options. These hand-held controllers can be used as a fully customizable data monitor—and with the unit's 3.5 in. display, your Sniper EFI system vitals can be viewed at a quick glance! Features and benefits include: * Full color, backlit 3.5 in. touch screen LCD * Laptop-free tuning changes to help optimize mileage, drivability, and performance * Basic tuning options allow simple adjustments of basic fuel, fuel learn, basic idle, spark, and more * System tuning options allow modifications to outputs, engine setup, ignition setup * Advanced tuning options allow fine-tuning of fuel, closed loop, learn, and idle—including IAC parameters and idle spark * Monitor a vast number of parameters in pre-configured, multi-gauge, and monitor screens—or customize your own * Set up ECU data-logging, download data-logs to SD card, upload and download global folders via SD card, update ECU firmware, and adjust rev limiters 1 and 2 * Includes 3.5 in. touch screen, mounting sleeve, power and extension harness, and SD card
( 11 )
$399.95
$359.95
On Sale
Holley Sniper 2 EFI 3.5 in. LCD Touch Screen Controllers
Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers give you access to a wide range of tuning options. These hand-held controls can be used as a fully customizable data monitor—and with the unit's 3 1/2 in. display, your Sniper EFI system vitals can be viewed at a quick glance! Monitor a vast number of parameters in pre-configured, multi-gauge, and monitor screens—or customize your own with Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers. Features and benefits include: * Full-color, backlit 3 1/2 in. touch-screen LCD * Laptop-free tuning changes to help optimize mileage, drivability, and performance * Basic tuning options allow simple adjustments of basic fuel, fuel learn, basic idle, spark, and more * System tuning options allow modifications to outputs, engine setup, and ignition setup * Advanced tuning options allow fine-tuning of fuel, closed loop, learn, and idle—including IAC parameters and idle spark * Set up ECU data-logging, download data-logs, or upload and download global folders with the SD card, update ECU firmware, and adjust rev limiters 1 and 2 * Includes the touch screen controller, mounting sleeve, power and extension harness, and SD card * Screen dimensions – 3.350 in. wide x 2.850 in. tall x 0.700 in. thick * Sleeve dimensions – 3.625 in. wide x 2.925 in. tall x 1.000 in. thick
( 1 )
$286.95
$258.25
On Sale
Holley Terminator X 3.5 in. Handheld Controllers
With Holley Terminator X 3.5 in. handheld controllers, your system vitals can be viewed with a quick glance. The full color, backlit LCD touch screen provides access to a wide range of tuning options and can also be used as a fully customizable data monitor. Holley Terminator X 3.5 in. handheld controllers include mounting sleeve, power and extension harness, SD card, and user manual CD. Features: * Laptop-free tuning changes to help optimize mileage, drivability, and performance * Basic tuning options allow simple adjustments of Basic Fuel, Fuel Learn, Basic Idle, Spark, and more * System tuning options allow modifications to Outputs, Engine Setup, Ignition Setup * Advanced tuning options allow fine tuning of Fuel, Closed Loop, Learn, and Idle (including IAC parameters and Idle Spark) * Monitor a vast number of parameters in pre-configured Multi-Gauge and Monitor Screens, or customize your own * Set up ECU datalogging, download datalogs to SD card, upload and download global folders via SD card, update ECU firmware, and adjust rev limiters 1 and 2
( 2 )
$357.95
$322.15
On Sale
MSD Digital 6CT Ignition Controllers
MSD Digital 6CT ignition controllers are hardcore ignitions that work as hard as you do at the track. Their superior design is packed with a slew of features, including a large, easy-to-read LED display and a simple setup utilizing three rotatory dials. MSD Digital 6CT ignition controllers offer the smoothest performance ever that comes in a fully potted, tamper-proof housing that uses a single connector to keep wiring tidy. MSD Digital 6CT ignition controllers feature: * Built-in start retard adjustable in 0, 10, or 20-degree increments for quick, easy starts and extended starter life * LED displays rev limit, highest rpm turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Single plug-in connector for clean wiring * Tamper-proof screws to prevent modification of unit * Records highest rpm the engine turned for last 20 minutes of run time * Works on 4, 6, and 8-cylinder engines * Reverse polarity and overheat protection provide ultimate reliability
( 4 )
$511.95
$459.95
On Sale
MSD Manual Launch Controllers
These MSD manual launch controllers let you change the launch rpm setting of MSD's programmable controls. The controllers allow you to make last-minute changes due to track conditions. They plug right into your MSD ignition control computer harness and have two rotary dials for adjustment.
( 1 )
$317.95
$286.15
On Sale
B&M Converter Lockup Controls
B&M converter lockup controls provide dash-mounted control to govern converter lockup at any speed between 30 and 90 mph. An LED display tells whether the converter is locked or unlocked. These kits eliminate converter lock and unlock cycling and premature unwanted converter lockup, avoiding engine lugging and spark knock. They also provide lockup at highway speeds for fuel economy. These kits are perfect for converter lockup operation when converting a non-lockup equipped vehicle to a lockup-style transmission and converter.
( 49 )
$349.95
—
$375.95
$314.95
—
$338.35
On Sale
MSD 2-Step Launch Controllers
This MSD 2-Step launch controller connects right to your late model Ford to produce consistent launches and quicker 60-foot times by setting an rpm limit to stage with. When activated, the rpm will be held at a steady rpm and once the green light comes on, release the clutch and take off. The rpm is adjusted with two built-in rotary dials ranging from 1,800-9,900 rpm in 100 rpm increments. A handy LED shows when the launch rev limit is active.
( 8 )
$322.95
$290.65
On Sale
MSD Atomic Transmission Control Module Harnesses
Hoop up your Atomic TCU with MSD Atomic transmission control module harnesses. They are designed to fit your specific transmission model and have the proper wiring connector for a direct fit.
( 7 )
$280.95
$252.85
On Sale
Hurst Roll Control Kits
Whether you call them roll controls, line locks, or whatever, Hurst Roll Controls keep your stick shift car out of the staging lights until you're ready to launch. Controlled by a solenoid valve attached to a switch on your shifter, roll controls keep you from rolling by locking your front or rear brakes. When you hit the switch, your brakes are unlocked and you're ready to hit the throttle. Rigorous testing has proved a 1/100,000th of a second release time, and vibration tests have surpassed 30 Gs without mechanical failure. Each roll control comes with a rebuildable stainless steel solenoid valve, indicator light, inline fuse holder, and complete instructions. Hurst Roll Controls give you one less thing to worry about when you're staging.
( 117 )
$299.95
—
$449.95
$269.95
—
$403.95
