Availability
Showing In Stock Items. Show All 34 Items.
On Sale
Edelbrock Performer RPM 5.8 EFI upper plenums are powdercoated light titanium gray and the plenum cover is removable to allow easy runner access. These Edelbrock Performer 5.8L plenums are designed for truck engines and feature a modular design that incorporates the latest air-flow technology for maximum torque gains in the mid-range. Will not fit vans.
( 2 )
$583.95
$467.16
On Sale
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$380.95
$342.85
On Sale
The G-Force III is the latest iteration of Go Fast Bits' feature-packed electronic boost controller—now with the ability to monitor and display your engine's air/fuel ratio in either Lambda or AFR. By connecting the analog output of most wideband oxygen controllers (i.e. Innovate LC-2, AEM UEGO etc.; sold separately) to the G-Force III's auxiliary input, you can toggle between boost pressure and air/fuel ratio display. This saves you from having to install a separate AFR gauge in your car, and it can also save your engine! A lean mixture at high boost can destroy an engine in seconds, and a stand-alone AFR gauge is next to useless when accelerating hard, as your concentration is likely to be on the road in front of you. The G-Force III safeguards your engine against a lean mixture by lowering boost to the minimum setting, and visibly warning you by flashing the display lighting. Whether your car is a daily driver or an all-out track weapon, the G-Force III has the features to tailor boost to suit your needs. Set up to six boost presets and select on the fly; use the scramble feature for overtaking, launching, towing, or protecting the engine—and you can even customize the lighting color to suit your interior! No other EBC on the market offers the features, control, ease of use, and value for money like the G-Force III! Additional G-Force III electronic boost controller details: * For boost pressures up to 50 psi (3.45 bar, 345 KPA) * Adjust peak boost, rise rate, and closed loop correction. * Display boost pressure in PSI, BAR, or KPA * 6 Boost presets, individually programmable * Unique "scramble" feature with remote switching * Peak boost recall * Air/fuel ratio display in AFR or Lambda (when connected to a wideband oxygen controller) * Separately adjustable overboost and lean mixture warning/boost cut * Touch buttons with user selectable illumination colors * Auxiliary input to switch boost presets or activate scramble * 1/2 DIN size casing, fits standard stereo slot * Supplied with MAC 3-port solenoid
( 1 )
$396.00
$356.40
On Sale
Steeda's CNC-machined billet charge motion plates are superior upgrades for your Mustang. Steeda's charge motion plates are designed for a better port match to the intake manifold and cylinder heads than the original plates, reducing turbulence and improving airflow in the intake path for more horsepower and torque. Beautifully CNC-machined out of 6061-T6 aluminum for superior strength and light weight, Steeda's charge motion plates are available with tapped nitrous fitting holes for custom nitrous applications.
( 6 )
$349.95
$314.99
On Sale
Spectre muscle car cold air intake kits deliver the power-increasing technology that race cars and modern cars have employed for some time. A company rooted in racing with a definite bias toward early muscle cars and speed, Spectre has designed simple, universal cold air intake systems for your specific ride. Available for many applications, these intake kits let you choose the location to draw the cold air from—the wheel wells, cowls, front gravel shields, or even the high-beams—with the optional headlight scoops. The more cold air you take in, the more power you make. Spectre cold air intake kits help to reduce the incoming air temperature by introducing fresh cold air to the engine for incredible power gains; and since your engine won't need to work as hard, there's the added benefit of improved gas mileage. Order the model designed for your muscle car application.
( 32 )
$399.99
$374.99
On Sale
aFe Power offers throttle bodies for a variety of applications, including many Toyota vehicles from 2003 and up. Product details (model 46-39103): * Brand new 76mm throttle body * No tuning required * Plug-n-play electronics * Billet aluminum adapter * More power and better throttle response * Hardware and gasket included * Direct bolt-on for simple installation * Larger bore throttle body: This aFe Power 76mm throttle body and adapter kit improves engine airflow over the stock 65mm throttle body. The extra airflow will increase horsepower and throttle response. This kit will work with OEM or aFe cold air intakes. Performance gains will be more noticeable as more upgrades are added to the vehicle. *6061-T6 billet aluminum adapter: All adapters are constructed from 6061-T6 billet aluminum and are precision-machined for light weight, high strength, and perfect fit and finish. The serrated/swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel, creating a more complete combustion cycle—increasing horsepower, torque, and improving throttle response. * Simple installation: Throttle body kit uses all factory mounting locations, providing stability and a hassle-free installation. All needed hardware is included with the kit. * Installation note: Idle will run high on some vehicles but will readjust once the ECU learns to properly control the idle (this can take up to 800 miles on some vehicles).
Not Yet Reviewed
$414.75
—
$523.95
$373.28
—
$471.56
On Sale
Turbosmart Ultra-Gate 38 wastegates are small and light, but offer maximum flow. These 38mm external wastegates feature a unique locking collar design for quicker spring changes, along with a one-piece stainless steel valve.
( 4 )
$372.95
$298.36
On Sale
These aFe Plug-n-Play throttle bodies are designed to improve engine air flow over the stock throttle body. The extra air flow will increase horsepower and throttle response. They will work with OEM or aFe cold air intakes. aFe Plug-n-Play throttle bodies include a 6061-T6 billet aluminum adapter, precision machined for light weight, high strength, and perfect fit and finish. The Serrated/Swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel creating a more complete combustion cycle increasing horsepower, torque and improving throttle response.
( 2 )
$352.80
$317.52
On Sale
aFe Power offers supercharger power pulley kits for a wide range of applications—including many Dodge, Jeep, and Ram cars and trucks from 2015 and up. These bolt-on kits will enhance your engine's performance. By changing the pulley diameter, you can adjust the spin rate of the supercharger, resulting in increased boost and amplified power. The aFe pulley kits are meticulously crafted to achieve a perfect equilibrium of lightweight design and high strength through precision machining. You can count on them for optimal functionality, a flawless fit, and an impeccable finish, ensuring a seamless boost to your engine's power. The pulleys are available in a variety of diameters; order the model recommended for your vehicle. Additional details: * Pulleys crafted from high-quality 6061-T6 billet aluminum showcase exceptional characteristics. Through precision machining, these pulleys achieve a remarkable balance of light weight and high strength, ensuring not only optimal functionality but also a perfect fit and finish. * Pulley kits feature a 17-4 stainless steel hub, combining corrosion resistance and high strength through precision machining, ensuring a perfect fit, impeccable finish, and optimal functionality. * Please note that special tools are required for removing the factory pulley from the supercharger snout, and aFe recommends professional installation for the kit to ensure seamless performance. * Black hard anodized finish * Laser-etched logo and sizing * Includes screws, washers and Thread Locker * Tuning is recommended * Smaller belt not required
Not Yet Reviewed
$296.10
$266.49
On Sale
Summit Bucks
Boost Products USA competition intercoolers provide you with cooling cores at the best possible price-to-performance ratio, delivering accurate processing and the best cooling, resulting in extremely low counter pressure. Boost's competition cores replace the ordinary fin and tube with very light cooling cores featuring inner turbulators for an optimal cooling effect as well as a lamellar structure for optimal airflow, creating an excellent balance between cooling effect, weight, robustness, and price. They have 3mm thick cast aluminum tanks with a matte finish and are tested to withstand 5 Bar pressure to resist the highest boost pressure. Choose the perfect fit for your vehicle.
( 2 )
$416.67
—
$532.00
$375.00
—
$478.80
On Sale
The Power Port is Turbosmart's largest and highest flowing blow-off valve ever, resetting the flow benchmark set by their popular and highly regarded Race Port blow-off valves. They are designed to be as light as possible, to keep vehicle weight down. The Power Port BOVs have a cutting-edge dual-chamber design, meaning they can be held open with the use of a solenoid to aid turbo response and control, during staging to give the best possible launch.
Not Yet Reviewed
$519.95
$415.96
On Sale
These AEM Electronics water/methanol injection pump and jet kits are intended for those who don't have room to mount even a one gallon tank, resulting in the use of the factory washer bottle. Kits include: * Check valve integrated into the nozzle that prevents unintended fluid flow * Boost referenced progressive controller * One injector and three nozzles to cover a wide range of horsepower levels * High-pressure 200 psi recirculation-style pump * LED dash light for system status * 20 ft. of injection tubing
( 1 )
$499.95
$448.95
On Sale
Go Fast Bits D-Force Diesel Electronic Boost Controllers are the perfect partner for all turbo diesel engines that use a pneumatic wastegate. With six boost presets and a timed scramble feature that can be selected on-the-fly, the D-Force can adjust your boost for all driving conditions—such as overtaking, towing, economy, racing, or even protecting the engine. As any modified turbo diesel owner knows, it's important to monitor EGT (Exhaust Gas Temperature) to avoid costly engine damage. Not only can the D-Force control your boost, but it can also display EGT! No other EBC offers the features, control, and ease of use like the D-Force. Order the D-Force with or without an EGT sensor. Additional details: D-FORCE GIVES YOU ULTIMATE CONTROL OF YOUR BOOST PRESSURE! Want to adjust boost for towing? Change it if EGT gets too high? Have multiple settings for different driving conditions? Bring boost on earlier or hold it longer? The D-Force can do all of this and more! Using a unique boost control strategy, D-Force lets you adjust the boost rise rate, peak boost, and closed-loop correction. There are six boost presets (plus an extra one dedicated to the scramble feature) that you can set up with different boost parameters for different driving conditions, and then activate them on-the-fly or at the press of a button. The unique scramble feature can be set up for a variety of purposes. It can raise or lower boost when activated with the screen button, or via the auxiliary input using a switch, button, or ECU output. For example, you could use it to lower boost pressure for safety by connecting it to an existing warning light, or instantly access high boost by pressing a button or flipping a switch. * The D-Force can also display Exhaust Gas Temperature and has a user-adjustable warning. This feature requires the EGT plug-in module, which includes a stainless steel EGT probe and weld-on exhaust bung, along with the module to connect it to the D-Force wiring loom. The D-Force kit is available with or without the EGT plug-in module, and the module is also available separately. * The controller interface is easy to use with touch-buttons and one-touch menu navigation. The boost pressure units can be displayed in psi, bar, kPa—and the peak recall feature lets you see your peak boost after each boost event. * 50 psi capability! * Closed-loop boost control strategy—for the fastest possible boost rise rate and minimum drop off at high RPM, the adjustable closed-loop logic helps prevent boost variations that can occur in different gears, RPM ranges, and atmospheric conditions. * Remote input trigger: Connect the remote input wire to a switch, button, warning light or ECU output to change boost presets or activate scramble boost. * Over-boost warning/cut: User adjustable warning to indicate if the boost pressure is too high and to cut the solenoid to lower boost and protect the engine. * Touch screen interface with simple menu navigation: Capacitive touch screen and single-touch menu navigation makes setup exceptionally easy. Scrolling text also means you always know where you are in the menu. * Choose your screen color: You can set the button illumination to any one of six different colors to match your car's dash.
Not Yet Reviewed
$396.00
—
$513.00
$356.40
—
$461.70
On Sale
aFe Magnum Force Super Stock Pro 5R air intake systems include Pro 5R filters with factory-oiled 5-layer, progressively finer, cotton gauze media. The progressive layering allows the filters to flow at high levels, even when dirty. They have been tested at 98.6 percent filtration efficiency and are washable and reusable for long life. The Super Stock systems with Silver Bullet throttle body spacers feature aFe's Serrated/Helix combination design that creates intake turbulence in the combustion chamber to increase horsepower, torque, and improved throttle response. The Serrated/Helix combination design also reduces the intake whistle of competitor's helix-only designs. The throttle body spacers are precision-machined from 6061 T-6 billet aluminum for light weight, high-strength, and a perfect fit and finish. The intake tubes are mandrel-bent with durable black powdercoating for increased airflow, improved volumetric efficiency, and better performance. The clamps, couplings, and hardware are included with these direct bolt-on kits, no cutting or drilling is required to provide a hassle-free installation.
( 2 )
$310.00
$279.00
On Sale
Turbosmart is synonymous with compact, light wastegates to regulate the maximum boost pressure in turbocharger systems. Now, the company introduces Ultra-Gate 38HP, the highest pressure external wastegates of their kind in the world! These valve units retain Turbosmart's trademark attributes and are ideal for all high-PSI turbo diesel and drag racing applications. Ultra-Gate 38HPs are specifically designed for classic two-bolt flanges (71mm spacing). Features include a one-piece valve base, a locking collar to easily change springs, and the proven silicon Nomex diaphragm.
Not Yet Reviewed
$519.95
$415.96
On Sale
Turbosmart is synonymous with compact, light wastegates to regulate the maximum boost pressure in turbocharger systems. Now, the company introduces Hyper-Gate 45HP, the highest pressure external wastegate of its kind in the world! These valve units retain Turbosmart's trademark attributes and are ideal for all high PSI turbo diesel and drag racing applications. Only 28mm taller than the standard Comp-Gate 45, these wastegates are available in base pressures from 10 to 40 psi, with flanges to suit 1 7/8 in. outside diameter tubing. Features include a one-piece base and the proven silicon Nomex diaphragm; choose from blue or black top caps.
Not Yet Reviewed
$587.95
$470.36
On Sale
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$447.00
$402.30
On Sale
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$461.00
—
$516.00
$414.90
—
$464.40
On Sale
aFe Momentum GT Red Edition cold air intake systems are not only engineered to outflow the factory intake for improved dyno-proven gains—their vibrant red color will also dress up your engine bay area too! Features and benefits: * One-piece sealed roto-molded housing is constructed of heat-resistant red XLPE (Cross-Linked polyethylene) polymer and features aFe patent-pending filter-to-housing interface * This system features high-quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit—and utilizes factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time * Featured red XLPE material is heat-soak resistant and extremely durable * An injection molded fitting is mounted on the tube to provide a perfect connection for the temperature sensor * 3-layer performance air filter has a massive oval flange with an inverted top Pro DRY S filter media—made of 3-layers of progressive finer porosity synthetic media to provide maximum convenience with 100 percent polyurethane frame for long life and multiple cleaning cycles * Pro Dry S air filter is washable and reusable for maximum convenience * Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available * Revolutionary design features patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system for simple installation—no cutting or drilling required
( 3 )
$516.00
$464.40
On Sale
Injen SP Series Speed Pro intake systems are developed for enthusiasts who demand the best. These units feature Injen's patent-pending MR Technology process for optimal gains and a safe air/fuel ratio. Speed Pro Series models do not limit themselves to just cold air intake or Short Ram systems—the MR Technology process has its effects on both types. The Speed Pro Series are the world's first bolt-on tuned intake systems designed specifically for your vehicle. The aluminum tubes are available in a variety of finishes; and the blue synthetic filters prevent particles from contaminating the engine..Hundreds of configurations are available; order the intake tailored for your application.
( 22 )
$470.75
—
$530.67
$376.60
—
$424.54
On Sale
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$447.00
$402.30
On Sale
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$433.00
$389.70
On Sale
aFe Takeda Momentum Pro Dry S cold air intake systems provide extreme performance without compromising style. Outflow your factory intake, and allow your car's engine to breathe and perform to its greatest potential with aFe Takeda Momentum systems. Features include: * High-quality, one-piece, roto-molded sealed housing with auxiliary air inlet * Housing is heat soak-resistant cross-linked polyethylene * CAD-designed, dyno-tuned, roto-molded intake tube * Built-in sight window provides easy inspection of filter without disassembly (not on all styles) * Pro Dry S 3-layer oil-free progressively finer synthetic media for efficient filtration * Unique filter-to-housing interface for easy installation * No cutting or drilling on factory parts * Premium clamps and hardware are included * Stainless steel clamps and a silicone coupling for strength and durability (not on all styles) * Takeda Momentum intakes are designed with fewer parts for a quick and simple installation
( 3 )
$384.00
$345.60
On Sale
aFe Takeda Momentum Pro 5R cold air intake systems provide extreme performance without compromising style. Outflow your factory intake, and allow your car's engine to breathe and perform to its greatest potential with aFe Takeda Momentum systems. Features include: * High-quality, one-piece, roto-molded sealed housing with auxiliary air inlet * Housing is heat soak-resistant cross-linked polyethylene * CAD-designed, dyno-tuned, roto-molded intake tube * Built-in sight window provides easy inspection of filter without disassembly * Pro 5R pre-oiled 5-layer progressively finer mesh cotton media for maximum airflow * Unique (patent pending) filter-to-housing interface for easy installation * No cutting or drilling on factory parts * Premium clamps and hardware are included * Takeda Momentum intakes are designed with fewer parts for a quick and simple installation
( 9 )
$372.00
$334.80
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
