Race Electronics Ignitions & Electrical - Manufacturer Rebates Savings Central - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Manufacturer Rebate

Innovate LM-2 Digital Air/Fuel Ratio Meter Basic Kits

These Innovate LM-2 digital air/fuel ratio meter basic kits combine an air/fuel ratio meter and a full-function 32-channel data logger to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, a race carburetor, an aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The Innovate LM-2 digital air/fuel ratio meter basic kits' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. Their self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. They also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2-compatible with all fuel types * OBD-II scan tool reads/clears DTCs and logs up to 16 channels of CAN OBD-II data (cable not included) * Large, high-contrast graphics LCD * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial in and out * USB connection to your PC

3.67 out of 5 stars ( 6 )

$469.99

Manufacturer Rebate

AutoMeter CAN Bridge Data Modules

AutoMeter CAN Bridge data modules are the ideal solution to streamline adding gauges or an InVision LCD dash to OBDII based engine and vehicle platforms (2008+). The intuitive CAN Bridge simply plugs into the diagnostic port and captures the existing sensor data and outputs up to six signals to drive a tachometer, speedometer, temperature, pressure, fuel level (0-90 ohm only), and volts on your vehicle. Quickly and easily setup your system to output the available parameters of your choice by utilizing the CAN Bridge data module's menu navigation buttons and OLED display. With this advanced CAN Bridge system from AutoMeter, you can now simplify your next instrumentation installation on your ride! Additional features: * Works with most OBD-II applications which is standardized across all OEMs starting in 2008 * Module includes OLED display and five push buttons to effortlessly navigate menus and program system for operation * Plug-and-play from OBDII to traditional round AutoMeter short sweep electric gauges, tachometers, electronic speedometers, and InVision LCD dashes * Six total channels available: tachometer, speedometer, fuel level (0-90 ohm only), temp, pressure, and volts * Simplifies instrumentation wiring and installation; no sensors to hookup, which means less wires to connect * Sensor data must be present on the data stream to function, otherwise a discrete sensor must be used

Not Yet Reviewed

$363.99

Manufacturer Rebate

Dedenbear Reaction Time Delay Boxes

These Dedenbear reaction time delay boxes feature push-button thumbwheels with a range of 0.000-9.999 seconds, and full voltage through the boxes, with no voltage drops to the transbrake. They can also handle any transbrake up to 45 amps. They can be used with solid core wires and on any ignition system.

5.0 out of 5 stars ( 2 )

$349.99

Manufacturer Rebate

Dedenbear Crossover Delay Boxes

Choose which tree--yours or your opponent's--to launch off of with one of Dedenbear's Crossover delay boxes. Use the regular delay feature to launch against your own tree, or flip on the crossover when you want to leave off of your opponent's tree. You can even use one box to leave off of your tree's top bulb, and one to leave off of the bottom one. The boxes feature push-button thumbwheels (0.000-9.999) and a toggle switch to bypass the box completely. The cross over delay boxes can be used with any transbrake up to 45 amps, and on any ignition system. Want the Dedenbear advantage for a win? Just dial it in!

5.0 out of 5 stars ( 3 )

$444.99

Manufacturer Rebate

Innovate TC-4 Plus Thermocouple Amplifiers

Innovate's TC-4 Plus devices are 4-channel thermocouple amplifiers for the MTS (Modular Tuning System). These data acquisition components may be used as stand-alone amplifiers for logging directly into LogWorks, or they can be used in conjunction with any other MTS-compliant device to retrieve key temperature metrics. Each of the four inputs of the TC-4 can be configured by the user for EGT range (32-1,999 degrees F; 0-1,093 degrees C) or CHT range (32-572 degrees F; 0-300 degrees C) to measure cylinder head temperatures. The TC-4 Plus can also be used to measure other temperature metrics, such as the turbo inlet and outlet, catalytic converter, transmission, and more. Using the TC-4's serial ports, you can daisy-chain other Innovate devices, such as the XD-16, AuxBox (LMA-3), LC-1, DL-32, and SSI-4.

5.0 out of 5 stars ( 1 )

$460.99

Manufacturer Rebate

Stack ST700 Wiring Harnesses

These Stack ST700 wiring harnesses are designed for use with your ST700 Race Dash system. They allow for the addition of pressure and temperature sensors.

Not Yet Reviewed

$291.99

Manufacturer Rebate

Stack Speed Sensors

Stack Gauges speed sensors are small, lightweight, and accurate. Designed for your integrated Stack Race Dash system, their wheel speed sensors help you to obtain speed readout by simply plugging them into the dash harness. Your speedometer can be configured for different tire sizes and to display speed in either mph or km/h. Add a performance option to your dash system--add Stack Gauges speed sensors.

Not Yet Reviewed

$275.99

Manufacturer Rebate

Stack Clubman Linear Potentiometers

Stack Clubman linear potentiometers provide excellent value for motorsport monitoring and measurement tasks offering sound repeatability, reliability, linearity, and environmental performance. Featuring anodized aluminum housings, IP65 sealing, self-aligning spherical bearings, and available in stroke lengths from 2 to 8 in. (50 to 200mm), these position sensors are pre-terminated for use with Stack data systems monitoring parameters, such as damper (shock) position, pedal inputs, steering angle, aerodynamic surface deflection, and actuator travel.

Not Yet Reviewed

$359.99

Manufacturer Rebate

Stack Professional Linear Potentiometers

Stack Professional linear potentiometers are engineered to excel in the most demanding conditions in motorsports, offering excellent repeatability, reliability, linearity, and extended environmental performance. Featuring IP67 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 2 to 8 in. (50 to 200mm), these position sensors are pre-terminated for use with Stack data systems monitoring parameters, such as damper (shock) position, pedal inputs, steering angle, throttle position, aerodynamic surface deflection, and actuator travel. Select the stroke length needed for your setup.

Not Yet Reviewed

$433.99