Availability
Showing In Stock Items. Show All 67 Items.
Spicer Drivetrain Products offers a great selection of factory-quality center yokes to fit hundreds of vehicles, particularly 4WD. Many socket yokes are now greaseable for long-lasting use and performance. Choose the center yoke that matches your equipment specs, and keep your universal joints and transfer case operating efficiently with Spicer Drivetrain Products, part of the Dana family of genuine OE replacement parts.
( 10 )
$377.99
PEM Racing's Ford 9 in. center housings are designed to provide a robust and durable foundation for high-performance rear-end applications, particularly in racing and modified vehicles. These housings are engineered to withstand the stresses of increased horsepower and torque, offering a stronger and more reliable base for the 9-inch differential. The PEM Racing HNF9 center housings are designed as an OEM replacement but also allows for customization with various axle tubes and carriers. This flexibility allows users to tailor their rear-end setup to specific needs and applications.
Not Yet Reviewed
$264.99
Strange offers their rear axle housings in a variety of configurations, from just the center housing to complete, ready-to-bolt-in assemblies. The axle housings are designed and manufactured to be more rigid and stronger than OEM housings. Depending on the application, they're fabricated from proprietary nodular iron (substantially stronger than cast iron) and other quality materials—then fixture-welded to ensure proper alignment; slotted for full tube engagement; and reinforced at critical areas to reduce center section and axle tube flex. Whether your car is headed for the street, the track, or the drag strip, customize the rear-end with a Strange rear axle housing so it will meet or exceed your expectations.
Not Yet Reviewed
$334.99
Noram Enforcer clutches are engineered to respond to a wide range of power-demanding kart race applications. The 3-shoe design offers 360 degrees of contact surface for maximum torque efficiency with less slip and greater operating range. Shoe linings also have a high coefficient of friction and are resistant to wear, fading, and troublesome vibration. The stamped drums have a 1 in. center bore; and the clutches are for outboard only.
Not Yet Reviewed
$276.99
Summit Racing™ intermediate shafts are machined from Vasco 300M steel. This material is exceptionally strong and resilient, allowing these intermediate/main shafts to withstand the most severe torsional shock. You can be confident they will not twist or break under stress--and will handle the power you put to your automatic transmission.
( 4 )
$318.99
Lokar Clayton Machine Works gated automatic transmission shifters are available in a floor mount configuration for most GM, Ford, and Chrysler transmissions. Available in several lever lengths, each part is designed with attention to details, implementing modern design elements and finishes to provide function and style that blends with any vehicle. Features include: * Available in floor mount only, can be converted to cable operation with optional conversion kit * Gated style, side shift detent pattern allows for unlimited knob options * Innovative lever design allows for easy removal and 360-degree rotation * Options available for mounting Tremec style levers * Durable coated bracketry * Neutral safety switch
( 8 )
$256.95
PRW offers Pro Series flywheels for a variety of applications, including many Chevy, Ford, American Motors, Jeep, Pontiac, Chrysler, Dodge, Plymouth, and Oldsmobile vehicles from 1955 and up. These SFI-rated replacements raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. They're engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. PRW 1045 billet steel flywheels are CAD-engineered and precision CNC-machined to strict tolerances. The choice of 5 out of 6 winning engine builders at the Engine Master Challenge four years running, PRW flywheels were awarded Best New Product of the Year at the 2006 Hotrod and Restoration Show. Every flywheel is engineered for excellence and rigorously inspected throughout the manufacturing cycle to ensure that customers receive the quality they've come to expect from PRW products. Order the model recommended for your vehicle.
Not Yet Reviewed
$395.74
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$349.95
Noram offers Cheetah clutches for a variety of karting applications. They are 4-cycle, 2-disc clutches with a 3/4 in. bore. The #35 chain Cheetah clutches come complete with a 15-tooth sprocket. Product features: * Removable sprocket saves you time and money * Precision-machined pressure plate gives more consistent engagement * Copper discs with superior linings provide excellent engagement and lock-up * Easy-to-adjust engagement springs
( 1 )
$268.99
USA Standard Gear driveshafts are high-quality, direct replacement units to repair your binding, bent, or rusty driveshaft. This critical component keeps the power flowing from transmission or transfer case to your differential. Order the model recommended for your vehicle and engine application. Features include: * 100 percent new components * Slip yokes and U-joints are lubricated with high-temperature grease * Fully assembled for simple out-of-the-box replacement * USA Standard "Perfect Fit" driveshafts are guaranteed for proper fitment and easy installation * Strengthened over common, OE-replacement shafts to prevent failure * Dynamically balanced to ensure smooth operation and long life
( 6 )
$419.99
—
$811.99
The Wheel precision-machined flexplates from J.W. Performance feature double-welded, high-quality ring gear and the highest quality steel centers. They are designed to take the punishment of today's high-horsepower revving motors from street to ProMod applications. All of J.W.'s flexplates are SFI-certified and have a replaceable ring gear. They're available in a heavyweight style for quicker launches and more rpm during the shift, or in a lightweight style for faster turbo spool time and improved engine response in street, Circle Track, and road race applications.
( 32 )
$395.12
—
$424.97
On Sale
Hurst Blackjack shifters locate the shifter handle in the proper location for your application. The Blackjack housings are CNC-machined from billet 6061 aluminum, anodized with a tough black MIL-spec finish, and finally engraved with the Hurst logo in the top plate. Each setup includes a zinc-plated and hardened chromoly steel stick adapter, dual stick centering springs, hardened chromoly pivot pins, and a durable Delrin pivot ball for positive, quiet operation. The classic Hurst chrome flat bar stick and white shift ball for the specified application completes the Hurst Blackjack shifters.
( 20 )
$749.95
$332.95
—
$417.95
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$462.99
—
$491.99
Summit Racing™ floor mount automatic transmission shifters are designed and manufactured with superior craftsmanship. The floor mount bracket allows for installation above or below the floor on the transmission tunnel. These shifters feature a gated shift pattern with side shift detent for easy shifting. The standard 7/8 in. center to center 2-bolt flange allows for easy removal and use of most lever designs. Removal of the transmission is not necessary, making installation a breeze. Get the quality and performance you're looking for with one of these floor mount automatic shifters.
( 20 )
$272.99
—
$479.98
Hybrid Racing offers A2 K-Series Swap bolt-in short shifters for a variety of applications, including many Honda© and Acura© models from 1988 and up. In 2008 Hybrid engineers set out to solve one of the largest headaches that K-Series swaps presented—What do you do about the OEM RSX plastic shifter? After a few months of designing and prototyping, they created the very first Bolt-In K-Series swap shifter. The Hybrid Racing Bolt-In K-Swap shifters allow you to retain the stock center console in your EF, EG, EK, and DC chassis and only require drilling two small holes. They work with both stock DC5 shifter cables and the Hybrid Racing race cables. From California to England to Japan, racers all around the world choose Hybrid shifters not only for their reliability but for ease of installation and adjustability. The front/back throw can be adjusted to three different settings (100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The left/right throw can also be adjusted to three different settings (again, 100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The shift knob can be adjusted to up to 3 in. vertically, and the aluminum offset block can be rotated 360 degrees. They accept M10 x 1.5 shift knobs.
Not Yet Reviewed
$408.49
XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.
( 5 )
$265.83
—
$550.45
Whether racing at a track, on the streets, or just having fun, Barton Ford Mustang shifters will help slam through shifts at an alarming rate. These shifters feature 304 stainless steel and 6061 T6 billet aluminum construction, hard durometer polyurethane bushings, and easy installation. Confident second to third gear shifts are obtained with firm centering springs. With 36 percent throw reduction, Barton shifters will quickly get you where you're going. Order the model recommended for your Mustang application.
( 4 )
$329.00
Hinson Motorsports short-throw shifters have no internal centering springs (thus eliminating missing gears due to wear) and narrow gates for quick, responsive control. Life's too short to deal with shift throws that are so long you end up hitting your funny bone on the center console. Avoid that and the pitfalls of missing a gear due to long, unruly handles by slamming through them with Hinson Motorsports short throw shifters instead! Please verify the fitment for your application when ordering. These high-quality shifters feature: * Available without or with various types of knobs * CNC-machined, anodized aluminum base with internal seals * Heavy-duty, hardened steel shifter handle to smoothly pound through gears * Grade 10, black oxide coated oversized hardware * Designed to handle extreme stress * 7/16 in. hardened studs
( 42 )
$385.00
—
$446.00
Hybrid Racing offers short shifter assemblies for a variety of applications, including many Honda© and Acura© models from 1988 and up. These economical units feature an unparalleled level of adjustability so drivers can tweak every aspect of the shifter to suit their own preference. The shifters' frame is constructed from TIG-welded, powdercoated, 1000 Series steel. The anodized upper and lower rocker assemblies are now made of single pieces of aerospace-grade aluminum, with custom sealed ball bearings to reduce friction. The new V2 shifter, for instance, is 60 percent smoother than the original version, requiring much less physical effort to row through gears all while being significantly lighter. Shift throw adjustment is achieved using two threaded cable attachment pins, meaning fine tweaks can be made to shift throw, allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin© pivot cap for sturdy, quiet operation. New dual, zinc-plated extension springs replace the OEM-style torsion centering spring for better-centering action and a more direct feel. The front/back throw and left/right throw can be adjusted independently; and most models include shift knob height adjustment. Simple single-bolt height adjustment design (borrowed from the popular K-swap shifters) allows the knob to be adjusted higher or lower than stock (within a 1.5 in. total range) with only a 5mm Allen wrench. Now you can tweak the shifter's throw AND knob position independently until the shifter functions exactly the way you want it to. Enjoy smooth, precise, and direct shifts with a new short shifter assembly from Hybrid Racing!
Not Yet Reviewed
$306.84
—
$408.49
Get your transmission in gear with one of these American Powertrain White Lightning shifters. They feature a billet aluminum base plate and tower with billet steel center core, plus an independent bias adjustment—an industry exclusive that significantly improves 2-3 shift action and overall shift feel with the simple turn of a screw. Their low-profile design is perfect for increased tunnel clearance, and the short throw action provides for accurate shifts. Dozens of models are available, for universal or transmission-specific applications.
( 9 )
$339.95
—
$399.95
Certain cars are born to be bad, and Barton addresses the Shelby GT500 with shifters designed to heat things up even faster. These shifters feature 304 stainless steel and 6061 T6 billet aluminum construction, hard durometer polyurethane bushings, and easy installation. Confident second to third gear shifts are obtained with firm centering springs. With 35 percent throw reduction, you'll be slamming through gears at an alarming rate. Order the model recommended for your Shelby GT500 application.
( 1 )
$409.99
ATI heavy-duty Vasco intermediate shafts are manufactured from Vasco Max C300 steel and available for a variety of transmissions. This material is exceptionally strong and resilient, allowing these intermediate/main shafts to withstand the most severe torsional shock. Some shafts feature a solid design (for center lube transmissions only) with no lube holes to help eliminate premature fractures. Order the ATI heavy-duty Vasco intermediate shafts best suited for your application.
( 3 )
$309.85
—
$339.85
These Driveshaft Shop Level 5 axle systems have been the most copied drivetrain components for front wheel drive cars to date because they work great and are very affordable. The bar has been raised for these Level 5 axles. They use the 1.4 O.D. outer CVs from the Level 6 systems, and have made the center bar larger by changing from 1 in. to 1.125 in. (now 34-tooth). They also feature a redesigned inner CV with an even larger tripod design. These systems are made to handle up to 800 hp and 28 in. tires.
Not Yet Reviewed
$524.98
Artec Industries Ford SuperDuty front axle trusses deliver a revolutionary low-profile design. They take the years of race and recreational abuse of Artec's first generation of trusses and add additional strength and functionality. Their key feature is how the truss top now bends around the differential for a better fit and clearance, making them ideal for vehicles needing more up-travel or for those building low center of gravity vehicles. The overall low-profile design means your axle is stronger, sleeker, easier to fit into any vehicle, and less likely to interfere with vehicle components. Features: * 3/8 in. thick mild steel truss top and 1/4 in. mild steel ram mount and gussets * Precision CNC-cut and bent for great fitment * Truss has super low-profile allowing better clearance for oil pans * Truss spans entire length of axle for complete reinforcement of the axle tubes * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Main interlocking gussets are wider than Gen1 trusses adding overall strength to truss * Internal gussets conform tightly to the contours of the differential allowing you to weld to it for additional strength and rigidity * Truss is clearanced for differential breather tube
Not Yet Reviewed
$319.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
