Availability
Showing In Stock Items. Show All 50 Items.
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$389.95
—
$449.95
$350.95
—
$403.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$549.95
$493.95
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 162 )
$255.00
—
$415.00
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 372 )
$340.95
$306.85
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 103 )
$395.00
—
$399.00
Cast flywheels are not explosion-proof and can be dangerous when used in high performance applications at higher rpm. RAM billet steel flywheels are recommended as replacements for factory-cast flywheels in high performance and racing vehicles. Made in America and produced in-house, all RAM flywheels are computer balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. They're better for launching heavier drag race cars and provide better drivability in street vehicles. SFI-approved, RAM billet steel flywheels are CNC-machined from certified materials. Order the model recommended for your year/make and engine application. Technical note: As they spin, heavy flywheels store more energy than lighter ones. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. When choosing a flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Insufficient gearing will cause an engine with too light of a flywheel to "bog" on launch.
( 132 )
$309.00
—
$329.00
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 304 )
$474.99
—
$650.95
TCI Pro Super transmission overhaul kits contain the same parts and pieces used in building TCI Streetfighters. You will receive components normally replaced on a transmission rebuild, along with new performance frictions and steels, plus a Trans-Scat valve body kit, which enables you to change the valve body to a manual/automatic setup that delivers both a good solid shift suitable for towing applications and a competition-quality shift for drag racing. Features: * Seals, gaskets, and bushings * High performance frictions and steels * Reusable-type pan gasket * Adjustable modulator * High-volume filter * Drain plug kit * Trans-Scat valve body kit * Performance band included in 700R4, 4L60E, and 2004R kits as they normally require a band during regular repair cycles
( 87 )
$388.95
—
$397.95
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 231 )
$325.00
—
$455.00
Centerforce billet steel flywheels are available for popular import and domestic vehicles, including trucks. They're CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installations. No modifications are required in combination with either Centerforce clutches or other clutch assemblies built to OEM specs. These rugged flywheels are SFI-approved, so you know that you can count on them--on the street and on the track.
( 60 )
$346.95
—
$493.95
RAM Muscle Car clutch kits are the perfect choice for mildly modified street cars and trucks where driveability is most important. RAM Muscle Car kits are popular for older restoration vehicles as well as late model cars and trucks with basic bolt on engine modifications such as headers and air intakes. These RAM kits offer super smooth clutch engagement and increased holding power with only a slight increase in pedal effort. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 78 )
$379.00
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$564.95
$507.95
Centerforce II pressure plates provide 60 percent more holding capacity than the pressure plates in factory original-equipment clutch setups. They're recommended for street and strip use on mildly modified vehicles. These pressure plates have also proven themselves to be very capable when used for 4WD vehicles, heavy-duty towing, commercial, and off-road applications.
( 14 )
$293.95
—
$377.95
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$577.95
Summit Bucks
These TCI transmission Master Racing overhaul kits are designed for racers who maintain their own transmissions. They contain parts that are required when freshening up an existing competition transmission. You'll receive the high performance filter, clutches, steels, seals, gaskets, and bushings normally replaced during a rebuild. In addition, kits for late model GM overdrive transmissions also include a new performance band.
( 58 )
$290.95
—
$315.95
Clearance
Zoom 30000 Series clutches are designed for 60s and 70s American muscle cars. These sets include higher clamp load Zoom assemblies and organic clutch discs (except where noted) with high burst strength organic facings. They also come complete with release bearing, pilot bearing/bushing, and alignment tool. Features include: * 20 to 60 percent increase in torque capacity over a stock clutch * Complete 5 piece sets include everything needed to do the job right * Premium, high burst strength organic facings * Higher clamp load cover assemblies with Zoom anti-rust finish * Specifically for '60s and '70s American muscle cars with mechanical linkages
( 52 )
$342.99
On Sale
Hays Street 450 clutch conversion kits are an excellent upgrade offering up to 30 percent more holding power (clamping force) over your stock clutch. They're designed for handling stock to mildly modified engines—up to 450 horsepower. If drivability along with a stock pedal feel are the leading factors for your application, then order the Hays Street 450 clutch conversion kit recommended for your specific vehicle and engine size. Features, items, and specs: * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded damper springs * Pressure plate * Clutch disc * Throwout bearing * Alignment tool * Instructions
( 8 )
$418.95
—
$424.95
Silver Sport hydraulic clutch master cylinder kits are offered for a wide range of vehicle applications. The components included in each kit may vary slightly due to application, but most will contain master cylinder, master cylinder mount, reservoir, pedal pushrod, hardware, and detailed instructions. The bore and stroke of the master cylinder are .750 in. and 1.4 in. respectively. Choose the SST master cylinder kit needed for your vehicle. Please note: This is the master cylinder kit only; release bearing is not included.
( 3 )
$379.95
Silver Sport manual transmission bellhousings offer aluminum construction and an ideal match for your street or strip tranny. SST bellhousings are available for popular GM, Ford, and Mopar applications, and are perfect for powertrain builds, restorations, and swaps.
( 8 )
$480.95
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$312.95
—
$500.95
On Sale
These QuickTime flexplates have been designed and engineered to fit your OEM transmission without any modifications. They are made from durable H70 grade steel and are double welded/TIG welded for durability. These QuickTime flexplates are also zinc plated for long lasting finish.
( 5 )
$486.95
$267.95
If you're building an all-out competition car, then you need a lightweight flywheel that will allow the engine to rev quicker and not eat up a lot of power. RAM billet aluminum flywheels greatly reduce rotating weight to permit quicker revving and higher power output, but still retain enough mass to resist heat distortion that could adversely affect clutch performance. RAM billet aluminum flywheels are made in America and produced in house. All RAM flywheels are computer-balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. SFI-approved, these flywheels are CNC-machined from certified materials and have rugged steel friction-surface inserts. RAM's billet aluminum flywheels feature a 1/4 in. thick friction insert to dissipate heat away without distortion. Technical note: As it spins, a heavy flywheel stores more energy than a lighter one. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. To effectively use a lighter flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Too little gear will cause the engine to 'bog' on launch.
( 31 )
$399.00
PRW billet steel flywheels are CAD-engineered, and precision CNC-machined from 1045 billet steel. Purpose built to handle extreme-duty applications and the punishment of high-horsepower engines, they are balanced and carefully inspected throughout the manufacturing process to ensure you receive the quality you expect from PRW. These billet steel flywheels feature removable counterweights for versatility and are SFI-certified.
( 6 )
$353.13
—
$430.53
On Sale
Hays Street/Strip clutch kits are engineered and built as matched assemblies, using only top-quality new parts, to deliver maximum reliability and durability, as well as long-term dependability. They're available in both diaphragm and Borg & Beck styles, with sprung-hub clutch discs that have organic linings. Applications are available to fit a variety of cars and trucks aimed at street or street-and-strip use. These kits come complete with a pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). A pilot bushing is not included.
( 9 )
$699.95
$384.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
