Availability
Showing In Stock Items. Show All 135 Items.
BD Diesel's transmission inline filter kits protect your heavy-duty automatic transmission against contamination in its transmission fluid. They eliminate contamination from prior transmission failure or excessive wear, as well as secondary damage to other parts once a part failure has occurred. They extend transmission life by minimizing wear and preventing the sticking and scoring of sensitive shift control valves. The added oil capacity adds cooling capacity, and an off-the-shelf oil filter has a bypass valve and prevents the formation of sludge that blocks passages. These kits are designed for an easy installation and come complete with all needed hardware, including large hoses and fittings that result in high gpm levels, even under extreme use.
( 1 )
$308.95
—
$363.95
Tilton's 6100-Series hydraulic release bearings feature race-proven Tilton reliability for the street. These hydraulic release bearings have been designed for ease of installation and maximum reliability, at a very competitive price. 6100-Series hydraulic release bearings are designed to mount onto the transmission input shaft bearing retainer, and are compatible with a variety of transmission types.
( 49 )
$382.50
—
$505.75
On Sale
You have to have a way to check the fluid level in your automatic transmission, so why not do it in style with B&M transmission fluid dipsticks? The cap screws into the tube and is O-ring sealed, while the base of the tube has a sealing grommet where it goes into the transmission, the same as most new GM transmissions.
( 40 )
$299.95
$251.05
—
$299.95
Tilton 6000-Series hydraulic throwout bearings feature race-proven reliability for the street! They have been designed for easy installation and maximum reliability at a very competitive price. The bearings feature a stainless steel threaded bearing retainer-mount sleeve that offers nearly 1.25 in. of adjustability, enabling them to be used with most 8.5 to 10.5 in. bent-finger, diaphragm-type clutches. The Tilton 6000-Series hydraulic throwout bearings include a -4AN stainless steel braided line supply line, a bleed line and fittings, a stainless steel threaded adjustment sleeve, and a special bearing retainer bolt.
( 2 )
$454.75
With the largest selection of remanufactured torque converters in the world to fit any transmission, model, or vehicle application, all VEGE remanufactured torque converters are built with parts that are of equal quality or higher quality than OEM (Original Equipment Manufacturer) parts, including VEGE's heavy-duty remanufactured torque converters. You can expect the best with VEGE! Specializing in reliable, yet affordable, sealed torque converters, VEGE torque converters are among the most popular in the industry. Their unique process combines the skillful experience of bench craftsman with the industrial engineering production line. Choose the torque converter model suited to your application needs.
( 10 )
$268.99
—
$368.99
Wilwood offers drum brake backing plates for a variety of applications, including many Ford, Chevy, and GMC axles. These replacements are manufactured from high-strength aluminum alloy and use steel clinch nuts for caliper bracket or accessory mounting. Each backing plate comes fully populated with drum parking brake shoes, springs and adjusters.
( 1 )
$387.95
—
$406.50
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 52 )
$258.99
—
$348.99
Ram uses only the highest quality release bearings from OEM manufacturers such as BCA, Nachi, and NSK for a smooth release every time.
( 1 )
$279.00
—
$439.00
RAM hydraulic release bearings offer maximum flexibility when setting up the clutch release system in your early or late model car or truck. RAM heavy-duty hydraulic bearings use larger, more robust O-rings, providing the ultimate in durability and long life when compared to factory and other aftermarket hydraulic systems. RAM hydraulic bearings are fully adjustable and are easy to set up with most aftermarket clutches, single or dual disc. RAM hydraulic bearings are also a great choice for use in your Tremec transmission conversion. Application specific bearing kits include every fitting, line, shim and adapter needed to connect directly to the factory master cylinder. RAM also offers other bearing styles with a wider 3.150 in. bearing face needed for 3 and 6 lever clutch applications. When only the best will do, choose RAM!
( 74 )
$439.00
On Sale
B&M converter lockup controls provide dash-mounted control to govern converter lockup at any speed between 30 and 90 mph. An LED display tells whether the converter is locked or unlocked. These kits eliminate converter lock and unlock cycling and premature unwanted converter lockup, avoiding engine lugging and spark knock. They also provide lockup at highway speeds for fuel economy. These kits are perfect for converter lockup operation when converting a non-lockup equipped vehicle to a lockup-style transmission and converter.
( 47 )
$340.95
—
$366.95
$306.85
—
$330.25
FTI Performance ESR Series torque converters are designed for mildly modified vehicles. They're built using Torrington bearings, race-prepped sprague hardened impeller hub, hardened turbine hub and splines, a new steel pilot, and laser-cut mounting ring. These units are available in a variety of sizes, advertised flash stall ratings, and numerous other options. Order the torque converter recommended for your transmission application.
( 64 )
$479.00
Reid Racing bellhousings are cast from high-strength 6061 T-6 aluminum and are heat-treated for additional toughness. These bellhousings pass stringent SFI 30.1 certification and are approved with no external shields required. The bellhousings feature an open bottom for easy converter access, a reduced diameter for better floorboard clearance, and a contoured mounting flange to properly match the rear of the engine block. No special flexplate is required. They are available for the Reid Racing Superglide and Super Hydra 400 transmissions.
( 8 )
$499.00
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
Behind the scenes, but still important—McLeod's 1400 Series hydraulic throwout bearings play a special role in the optimal performance of your vehicle. Their most versatile choice to fit most applications, the 1400 bearings slip right over the front collar of your transmission. They're self-adjusting, meaning that you'll never have to adjust them as your clutch wears—and they can be set for the proper mounting clearance needed. The bearings are made of the finest hard-anodized billet aluminum, and equipped with quality elbow swivel fittings and high-pressure stainless steel lines for extreme durability. What happens backstage is just as crucial as what happens out front to bring about a rousing performance. You can't see McLeod 1400 Series throwout bearings as they work, but the part they play is vital to optimize the performance of your mean street or strip vehicle.
( 37 )
$395.00
—
$499.00
Moroso has turned its attention to the design and manufacturing of premium-quality transmission pans. Their transmission pans are fabricated entirely from lightweight aluminum and feature a one-piece billet rail to ensure leak-free sealing. Precise CNC-manufacturing and TIG welding prevent distortion for a perfect fit every time. Pans with extended depths reduce temperature and improve oil control during acceleration and braking. They include filter spacers on extended-depth versions where needed. All Moroso transmission pans include dual fittings (except MOR-42050) with magnetic drain plugs and pan mounting hardware.
( 67 )
$258.99
—
$384.99
Tilton 4000-series hydraulic throwout bearings feature a 4-bolt mounting pattern and a constant-contact design for immediate response and are self-adjusting for clutch wear. Machined from billet aluminum for strength and weight savings, they can be adapted to numerous applications with minor modifications. Tilton offers the 4000-series hydraulic throwout bearing in multiple configurations to help you find the right one, so you can get back in the race.
Not Yet Reviewed
$318.75
—
$335.75
If you're doing an engine or transmission swap, building a kit car or street rod, or you just need a replacement bellhousing, look no further than Ford Performance Parts bellhousings. They are cast aluminum production-style bellhousings built to Ford's specifications, ensuring you of a high-quality product that's right for the job. Some applications may require minor modifications for transmission clearance and mounting.
( 27 )
$299.99
—
$309.99
American Powertrain Hydramax master cylinder kits are made ready for you to utilize with existing slave or concentric hydraulic bearings. The clutch units are highlighted by a patent-pending Hydramax bracket which mimics the original clutch rod angle for perfect linear actuation. This well-designed component features an integrated pedal stop, 90-degree adjustability, and a durable nickel finish with a low-profile master cylinder. Also included in the kits, you'll find a model-specific pedal push rod kit, flexible reservoir for remote or local mounting, PTFE-lined steel braided line—plus hardware, lines, and fittings. Order the assembly recommended for your vehicle application.
( 8 )
$359.95
—
$489.95
In 1989, Dodge and Cummins came together to make a diesel light truck for the ages. From 1989-92, Dodge coupled the Cummins to a Gertrag 5-speed manual transmission. Now, with the use of Advance Adapters Mopar NV4500 transmission bellhousing adapters, you can upgrade these earlier models to the NV4500. The NV4500 5-speed was used in heavy-duty Dodge trucks for the 1993-2007 model years, making it considerably easier to find donors over the Gertrag. These adapters feature a new 356 T-6 aluminum bellhousing and a new pilot bearing for both 2WD and 4WD applications. In addition, 4WD kits include a transfer case shift bracket and crossmember mount. To make things easier and less expensive for the consumer, these bellhousings utilize the stock clutch arm, release bearing, and slave cylinder. Modifications will be required to the NV4500 prior to assembly. The bearing retainer must be removed from the front and shortened to 4.297 in. long to prevent any interference with the hub on the clutch disk. Test-fit the bellhousing to the Cummins block to check flywheel and clutch assembly clearance. There is a 4.5 in. difference in length, so you will need floorboard modifications 4.5 in. back from the original location. Finding replacement parts and rebuild kits for Gertrag 5-speed transmissions is difficult and expensive. Change to the NV4500 transmission with the help of Advance Adapters Mopar NV4500 transmission bellhousing adapters.
( 6 )
$495.71
Summit Racing's Pro LS transmission adapters enable you to swap to more common and inexpensive manual transmissions from other vehicles. In addition to the bellhousing adapter, they often include handy items like the billet steel flywheel, fasteners, pilot adapter, and starter mounts. These adapters allow the use of the high performance clutches commonly used with the transmission. The kits are available for 5-speed or 6-speed applications.
( 1 )
$279.99
On Sale
Hays hydraulic release bearing kits will convert your favorite factory hydraulic-equipped car from a mechanical-style to hydraulic-style release bearing. Hays throwout bearings offer full adjustability, reduced pedal effort, and an easy set-up with most single or dual disc clutches. These kits are designed to fit various manual transmissions; order the model recommended for your vehicle and tranny application. Features and benefits include: * Improved clutch engagement and disengagement * Adjustable design provides increased travel over stock release bearing * Retrofit kits offer a simple way to add easy-effort hydraulic clutch actuation * Floating design bearing with large O-rings and PTFE backup rings to eliminate fluid leakage * Kits include bearing assembly, bearing retainer (where required), mounting hardware, adjustment shims, and -3 AN feed line
( 4 )
$299.95
$269.95
—
$479.95
Grab one of these race-ready Summit billet aluminum flywheels for the durability and performance that you demand at a great price! Ideal for light drag racing and road racing, these flywheels are constructed from high-strength, forged billet aluminum for superior strength. The ring gear is mounted with welded tabs riveted to the flywheel. These precision-balanced flywheels are SFI-1.1 approved and most are drilled for both Borg & Beck and Long-style clutch assemblies.
Not Yet Reviewed
$416.99
—
$441.99
Offering race-proven Tilton reliability for the street, Tilton 1100-series hydraulic release bearings (HRB) are designed for flush-mount "Saab-type" 3-bolt mount applications with four bearing options. These throwout bearings feature a flat-face contact bearing ideal for 8.5 in. - 11 in. bent-finger clutches. Precision-machined from superior lightweight aluminum and treated with a durable, low-friction coating, these light, yet strong and durable hydraulic throwout bearings provide race-proven results, time and time again. Features: * Unique monoseal multi-edged quad-tension seal * Resilient orange seal for wipe seal debris prevention * Constant contact design means your system is always ready to engage * Self-adjusting to maintain the same pedal feel, shift after shift
Not Yet Reviewed
$301.75
Skip the clunky old mechanical linkage and install American Powertrain Hydramax hydraulic clutch release systems. They easily install in almost any rear-drive vehicle. The patent-pending adjustable master cylinder bracket allows you to mimic any original clutch rod angle, giving you a smooth, modern clutch feel without hacking up your firewall. The systems are designed to work with original and aftermarket pedals and are available for most vintage 4-speeds, along with TREMEC T5, TKO, Richmond, T56, and Magnum 6-speed transmissions. These systems come with the nickel plated firewall mount, volume-matched master cylinder, as well as a reservoir kit, lines, fittings, model-specific pedal mounting hardware, and model specific internal or external slave cylinder.
( 81 )
$499.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
