Availability
ZROADZ front roof LED brackets are laser-cut from 3/16 in. mild steel and finished in a low-gloss textured black finish to complement your vehicle with strength and style. The brackets are available to mount LED light bars or pods (both sold separately) and feature ZROADZ's patented single through-bolt attachment and include a heavy-duty solid rubber gasket for a watertight seal. The patented thru-bolt fasteners provide a secure mount with minimal exterior penetration and a convenient method to run wires into vehicle cab without the worry of weatherstripping wind noise and leaks, or other subpar wire routing methods. Order the brackets designed to fit your application.
( 1 )
$334.50
—
$424.50
ARB offers slimline roof rack lights that are for use with their base roof racks. Complementing the sleek design and mounting system of the ARB base rack, these roof rack light bars utilize the simple mounting system of the bar rack, allowing them to be quickly and easily setup. Sitting at 36 in. wide, the mounting system will provide provisions for the light bar to be installed either in the front of the rack or neatly tucked up underneath. Upgrade your vehicles utility with these slimline roof rack lights by ARB. Additional features and benefits: * Extruded aluminum body with stealth black powdercoat finish * Includes 304 stainless hardware * Brackets included allow two mounting options dependent on roof rack * Virtually indestructible polycarbonate lens * Unique reflector design provides optimum distance and width for highway driving, limiting light reflection off hood or bumper * Combo beam technology provides excellent mid-to long-range spread as well as distance down the road * Mounts suitable for base rack and ARB Trade and Touring racks * Offers reverse polarity protection * Breather with pressure-tested seal, and vibration and UV tested * Dust and waterproof to IP68 * Two-pin, over-molded, waterproof plug * Suitable for use with ARB driving light loom (sold separately)
Not Yet Reviewed
$499.95
Clearance
ZROADZ front roof LED light kits come complete with light, mounting brackets, wiring harness with fusible link, relay, switch, and all necessary hardware. The kits are offered with curved light bars, straight light bars, or roof top side-mounted pods. Packages are also available that combo light bars with top side-mount or A-pillar/hinge-mount pods for extreme auxiliary illumination. All ZROADZ light bars and pods have CREE LED chips, premium optics, and clean, crisp light output set in IP67/68/69 rated housings to provide extreme waterproof protection in off-road environments. ZROADZ front roof light kits feature laser-cut mild steel mounting brackets and a heavy-duty solid rubber gasket for a secure, watertight installation. Many of the roof brackets feature a patented through-bolt fastener that provides minimal exterior penetration and a convenient method to run wires into the cab without the worry of weatherstripping wind noise and leaks or other subpar wire routing methods. Choose the style and fit for your vehicle and order today from Summit Racing™.
Not Yet Reviewed
$974.50
$469.50
—
$489.50
Own the night with Rigid Industries roof mount brackets. Each bracket is designed to make installation of a light bar easy, giving you a high light to light up the trails. Designed to be tough, Rigid uses laser-cut stainless steel then applies an abrasion- and UV-resistant black powdercoat finish to make sure they look great and last. Don't drive blind, light up the darkness with Rigid Industries roof mount brackets.
Not Yet Reviewed
$403.99
On Sale
Add extra-bright light to your ride on the fly with our Summit Racing™ LED light bars. They employ quality LED chips with a tempered glass lens, all surrounded with an aluminum housing for durability and excellent heat dissipation. These auxiliary lights are IP67 rated for dust and moisture sealing to offer lasting service—and include wiring harness, relay and light switch, and mounting brackets to facilitate an easy installation. The light bars provide multiple uses: driving lights, reverse lights, bed lights, etc.; and they offer versatile mounting options on your rig, such as the roof, the front or rear bumpers—just about anywhere! Order the length and wattage needed for your vehicle.
( 32 )
$339.99
—
$389.99
$305.99
—
$350.99
Rough Country LED upper windshield light bar kits are easy-to-install and present the ultimate solution for adding an aggressive looking, forward-facing lighting system to your Jeep. With modern, stylistic design and superior strength, the included powdercoated mounts securely hold the 50 in. light bar between the top of your Jeep's windshield and roof, spanning the entire width of the roof and providing a killer look. Kits include: * Premium, flat-wound wiring harness with on/off switch * Brackets with laser-cut RC logo * Hardware
Not Yet Reviewed
$299.95
—
$439.95
Hella LED 470 light bars were developed for the special requirements of off-road vehicles, and for aerodynamic installation on the roof of truck cabins, but their slim design enables them to be mounted in various spaces on heavy-duty trucks, pickups, and cars. With 16 brilliant LEDs and 1,900 lumens, Hella 470 light bars will provide added radiance to the road ahead of you. The housing is made of thermo-conductive plastic, allowing for effective heat dissipation from the LED electronics. The rear of the housing is an innovative ribbed designed, and the lights include stainless steel mounting brackets that allow for flexible positioning. Hella LED 470 light bars are IP 6K7 and IP 6K9K rated for protection against dust, temporary water immersion, and high-pressure/steam jet cleaning.
( 1 )
$329.99
—
$456.99
Hella LED 350 light bars are aerodynamically designed, a mere 1.7 in. tall, and their brackets allow flexible mounting for even better airflow. These fully sealed and submersible light bars dissipate heat through their thermo-conductive plastic housings to keep the high performance LEDs from overheating. Ideal for long-range, off-road use, they come with wire leads, instructions, and are available in several styles to fit your lighting needs. For lightweight performance, you need Hella LED 350 light bars. Additional features include: * Developed for the special requirements of off-road vehicles and for installation on the roofs of truck cabs * Slim design allows mounting on heavy-duty trucks, pickups, SUVs, and cars * The rear of the housing features an innovative ribbed design * Effective heat dissipation from the LEDs * Suitable for horizontal mounting * Stainless steel mounting brackets * Two intensity light settings for wide and narrow beam versions * Available beam patterns: driving, pencil, wide, and narrow * Driving and pencil beams are ECE-approved
Not Yet Reviewed
$255.99
—
$360.99
Rigid Industries' A-Pillar Mount kit with D-SS PRO-Series Lights is designed for specific vehicles—and allows for a clean install of Rigid's high-output LED lighting. The kit includes mounting brackets, 40 in. SR-Series PRO single-row LED light bar with combination spot/flood optics, and a wiring harness. Professional installation recommended. Additional details: * Complete LED Light Roof Mount LED Light Bar Mount Kit * Stainless Steel Construction * UV and Abrasion-Resistant Powdercoat * 40 in. SR-Series LED Light Bar Included * Wiring Harness and Switch Included
Not Yet Reviewed
$508.99
—
$550.99
If you want the best performance from your LED light bar, you'll need a pair of Anzo LED light bar brackets. Anzo is an emerging leader in performance lighting technology and offers affordable products designed and tested to adhere to international quality standards. These LED light bar brackets are quality components that add a reliable mounting system to any vehicle—and are available for roof, hood, windshield frame, and tube mounting. They're offered in a variety of styles and for different vehicles and light bar sizes. Additional product details: * Laser-cut designs * Available in aluminum and steel * Natural and black powdercoat finishes * Designed and built for strength and durability * Weatherproof * One-year manufacturer warranty
Not Yet Reviewed
$299.99
LED lights brighten the night to incredible degrees, but mounting them where they're needed isn't so simple. ZROADZ auxiliary light mounting brackets have are available in vehicle-specific and universal designs for optimum placement, coolness, and style. These laser-cut steel brackets are pressed, formed, drilled, and powdercoated with a black finish. Most units are bolt-on, while longer roof mounts require a single hole for routing wiring (includes a rubber grommet). ZROADZ auxiliary light mounting brackets put the glow where it's needed. Features include: * Configurable with available forward, side, and rear-facing mounts * Allows customized and adaptable modular accessory mounting * Lifetime product warranty
( 2 )
$414.50
With pre-configured mounting holes, KC HiLiTES Xross overhead light mount bars can securely hold anywhere from two to nine 4 in. lights with ease. Slotted holes allow for extra customization and to accommodate a variety of light sizes. Xross bars feature a recessed channel and series of R-Clips for an integrated wire management system. Simply attach your lights and run wiring underneath through the recessed channel for a quick, clean, and easy install. No messy wires and zip-ties here; KC has taken the headache out of wiring multiple lights to get you on the road quickly. The 50 in. bars feature a low-profile aerodynamic design constructed from high-quality 6063 T6 extruded aluminum in an attractive satin black powdercoat finish. This makes the KC Xross bars lighter than steel bar options on the market, while being highly durable with their resistance to corrosion and rust.
( 1 )
$324.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
