Availability
Enhance your logging performance with AiM Sports ACC3 analog CAN converters. Connectable to most AiM devices, these compact and powerful units manage up to four analog inputs to a maximum frequency of 1 kHz each, and feature two speed inputs at a maximum frequency of 10 kHz. They have an IP65 waterproof rating. Each kit contains a 4-channel split harness and CAN cable. Improve communications with an AiM Sports ACC3 analog CAN converter. Select the kit with the correct harness and cable needed for your AiM setup.
Not Yet Reviewed
$375.00
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.
Not Yet Reviewed
$349.95
—
$399.95
Morimoto OEM LED conversion harness H129K is designed to adapt the 2017-19 Ford F-250 LED headlights onto trucks that came standard with base H13 dual halogen headlamps. This wiring harness kit allows you to upgrade to the most modern Super Duty look without cutting, splicing, or modifying anything on the truck's factory harness. * PLUG-N-PLAY: This wiring harness kit is a seamless solution to keep your low and high beams under control on the new OEM LED lights using the original controls inside the cabin. The outputs plug directly into the multi-pin connector on the back of each headlight from Ford. * ADVANCED: The unique Morimoto relay harness is designed to retain full function of the OEM headlight just like it came from the factory. No hiccups, no flickering, no problem! * OEM GRADE: Aside from being ahead of the game from a technical standpoint, the Morimoto HD relay harness is also a work of art. With its wiring protected by abrasion-resistant Techflex mesh sleeving and its extruded aluminum relay shell that's been anodized and laser-engraved, the MotoControl harness will look factory fresh under the hood!
( 2 )
$368.00
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 54 )
$330.99
$259.99
—
$398.99
aFe Sprint Boosters offer your ride an adrenaline kick! Designed for ETC systems, or drive-by-wire, these simple-to-install power modules plug into the OE connector located behind the accelerator pedal--no wires to cut. aFe Sprint Boosters deliver improved acceleration and reduce throttle response time. They will not affect your vehicle's electronic system and offer three settings for better drivability: factory (off), sport (green), and race (red). Raise the performance level of your ride with aFe Sprint Boosters.
( 20 )
$311.85
JMS Chip ThrottleMax throttle body swap controllers allow you to convert your Mustang's digital throttle body to an analog style throttle body. These kits include the wiring harness as well as the controller to make for an easy conversion.
( 1 )
$399.75
American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.
( 28 )
$261.25
Mopar Replacement body control modules are available for your Mopar vehicle to keep your electronic systems functioning properly. These Mopar Replacement parts are factory OEM parts and will fit and function just like the original. Programming may be required during installation. With genuine Mopar Replacement parts, quality is a starting point, not an afterthought.
( 2 )
$294.99
—
$362.99
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$259.95
—
$368.95
Racepak V-Net connector modules are used to convert the CAN data stream into a V-Net CAN bus data stream compatible with the Racepak V-Net system. This data is then available for use with the full range of Racepak V-net devices, including on-board displays, real-time telemetry, and data-logging applications. The Racepak V-Net connector modules provide setup capability to accommodate selection of scaling units, data-logging sample rates, and even custom sensor calibration.
( 2 )
$259.95
—
$399.95
On Sale
AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit
Not Yet Reviewed
$413.95
$371.95
American Autowire power window reversing relays are offered in a 2-window and a 4-window version. Each kit is equipped with 40 amp relays and is designed to supply the reversing power needed to operate power windows, convertible tops, seats, antennas, or any other motor-controlled accessory that requires the ability to reverse polarity. American Autowire power window relay kits will work with both high-amperage and low-amperage control switches, and the matching color coding of the relays and their corresponding wires make installation a breeze. Panels are protected by included self-resetting circuit breakers. Both systems are designed to work as a standalone install, or in conjunction with any of American Autowire's Factory Fit and Street Rod Division harnesses. As with all American Autowire products, these kits are backed by our industry leading Technical Support to make connecting your power windows easy! Select the kit needed. Additional features: * Each panel is equipped with a G10 composite base plate to provide superior heat and electrical insulation, while also facilitating easy mounting of the panel * Long 120 in. wire leads allow the panel to be mounted in even the most remote locations inside the vehicle * Relay labels and their corresponding wires are color coordinated, taking the guesswork out of the installation * All wires are the same GXL polyethylene crosslink used in American Autowire's products, matching the quality and durability you've come to expect
Not Yet Reviewed
$331.55
Clearance
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$250.99
—
$498.99
All American Billet offers alternators for a variety of applications, including many Buick, Chevrolet, GMC, Oldsmobile, and Pontiac cars, trucks, and vans from the 1980s and '90s. The alternator converts chemical energy from the gas engine into electrical energy to power your vehicle's electrical system—and also charges the battery. Alternators power the operation of headlights, windshield wipers, dashboard instruments, radio, power steering and windows, and heated seats. These replacement units from All American Billet are manufactured from OE materials and specs to ensure proper fit and performance. The alternators meet or exceed factory quality standards. They can be connected with one wire and include an internal regulator. Select the finish you prefer.
( 1 )
$359.99
—
$375.99
Manufacturer Rebate
Dedenbear RPM2 switches feature push-button thumbwheels to let you select any shift point in 100 rpm increments, from 1,000 to 9,000 rpm. The switches sense rpm using MSD, Mallory, Crane, or any other standard ignition system. They have a 0.5-second delay feature that wires into the transbrake, or roll control to prevent false shifts due to tirespin, converter flash, or launch.
( 1 )
$339.99
FAST XDi Sportsman distributors are designed to deliver the most accurate trigger signal possible throughout the entire rpm range of your race engine. This is accomplished through the use of an advanced Hall-effect style pickup, which is then converted to a signal that most CD ignition controls accept. The benefit of a Hall-effect pickup is: there is no retard, commonly called magnetic pickup compensation—so you can ensure your timing remains stable from idle to race rpm. Inside the CNC-machined billet housing is a polished stainless steel shaft that is supported with sealed ball bearing on the top and a long bushing on the bottom. They've also reduced end play in the distributor to take out any timing variations and damage to the gear. FAST XDi distributors are supplied with high-quality rotors and caps, and are available with a large diameter Ford-style cap or smaller diameter GM points size cap with HEI terminals, as well as either a steel or bronze gear. Order the Sportsman tailored for your year/make and engine application.
( 1 )
$393.95
—
$464.95
Edelbrock Max-Fire Coil On Plug ignition coils are designed with higher resistance for increased energy output at higher rpm, when compared to an OEM coil. They're ideal for use with turbocharged and supercharged applications or engines that have been converted to E85 fuel. The coils are sealed with a high temperature epoxy for shock and vibration resistance—as well as excellent thermal conductivity. The spark plug spring contact is made from stainless steel, with a ferrite lug to reduce EMI/RFI noise; while the boots are molded from a high temperature silicone compound for superior heat resistance up to 550 degrees F. Order the direct bolt-on OEM coil pack recommended for your vehicle.
( 5 )
$293.95
—
$342.95
Manufacturer Rebate
Innovate's TC-4 Plus devices are 4-channel thermocouple amplifiers for the MTS (Modular Tuning System). These data acquisition components may be used as stand-alone amplifiers for logging directly into LogWorks, or they can be used in conjunction with any other MTS-compliant device to retrieve key temperature metrics. Each of the four inputs of the TC-4 can be configured by the user for EGT range (32-1,999 degrees F; 0-1,093 degrees C) or CHT range (32-572 degrees F; 0-300 degrees C) to measure cylinder head temperatures. The TC-4 Plus can also be used to measure other temperature metrics, such as the turbo inlet and outlet, catalytic converter, transmission, and more. Using the TC-4's serial ports, you can daisy-chain other Innovate devices, such as the XD-16, AuxBox (LMA-3), LC-1, DL-32, and SSI-4.
( 1 )
$460.99
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. These pressure or temperature module/sensor combinations are the same as Racepak analog pre-programmed V-Net modules with sensors except that they have NOT been pre-programmed. Racepak analog programmable V-Net modules with sensors must be programmed using the Configuration File in Datalink software (not included).
Not Yet Reviewed
$329.95
On Sale
Summit Racing™ Direct-Fit AutoFuse Restoration Series dash harnesses and accessory kits allow you to maintain the plug-and-play functionality of the original factory-type harnesses while converting the entire fuse block from glass fuses to an updated and modern AutoFuse Series ATO-type fuse block. Our new kits offer restorers the flexibility to add additional power circuits, without the installation problems normally associated with this type of fuse box update. No cutting, modifying, or altering is required just plug it in and turn it on. Compatible with all original or remaining harnesses in the car. Choose the desired kit designed for your vehicle.
( 1 )
$394.99
$387.99
—
$469.99
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$250.99
—
$497.99
Digital Guard Dawg OEM-style start buttons are modified versions of the factory models that have been converted to work with all 2GO Keyless modules. They are beautifully and skillfully made, with many featuring back illumination or soft-glow back lighting and/or LEDs indicating operating status. Digital Guard Dawg offers several popular choices from elegant to race-inspired styles that will put starting power at the tip of your fingers.
Not Yet Reviewed
$309.37
—
$317.30
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$252.99
—
$453.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$255.99
—
$460.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
