Availability
Showing In Stock Items. Show All 30 Items.
Dorman offers cylinder deactivation solenoids, a.k.a. CD manifolds, that have been rigorously engineered to directly replace the original equipment on select vehicles. This design features multiple upgrades to help ensure performance and reliability—such as an increased sealing surface interface, a redesigned rod sub-assembly, and superior quality O-rings and gasket. Durably constructed, the solenoid rod is hardened for improved wear resistance and to help maintain tighter tolerances. Internal bore step incorporates a radius edge to prevent valve sticking for reliable operation.
( 1 )
$286.99
The manifold absolute pressure (MAP) sensor is part of many engine electronic control systems. It delivers instantaneous manifold pressure information to the engine's electronic control unit (ECU). The data provided by the MAP sensor is used to calculate air density and determine the engine's air mass flow rate. This data determines the required fuel metering and ignition timing for optimum engine performance. Denso manifold absolute pressure sensors provide superior air and fuel regulation with leading edge sensing technology. As one of the first companies to produce engine management sensors, Denso continues to bring new technology to the industry. Key features of Denso manifold absolute pressure sensors include: * Meets or exceeds OEM specifications * Manufactured with the highest quality materials * Efficiently measures the pressure of the intake manifold * Engineered to fit the first time * Enhances performance and fuel economy by replacing a failing MAP sensor
Not Yet Reviewed
$282.99
—
$447.99
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$368.95
On Sale
MSD Pro-Billet locked-out distributors are built from strong billet aluminum for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft, while an extra-long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high-output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision-manufactured reluctor is responsible for triggering the pickup. Since these distributors are designed primarily for race engines, an oversized (+.006 in.) bronze gear is installed, along with an adjustable slip collar for modified blocks, heads, or intake manifolds.
( 32 )
$468.95
—
$499.95
$421.95
—
$448.95
On Sale
Specifically designed for use with the Holley 8.2 in. SBF Hi-Ram intake manifold, these EFI low-profile SBF Dual Sync distributors share all the same great features of other Holley EFI Dual Sync distributors. The design includes dual Hall effect sensors for the crankshaft and camshaft signals. They can be used as just a crank speed input, as well as providing a cam sync signal for a sequential fueling operation—or to provide the needed crank and cam signals for coil-on-plug applications. The precision-machined shutter wheel design ensures accurate timing, even at very high engine speeds. Holley Sniper EFI low-profile SBF Dual Sync distributors also provide compatibility with other EFI systems that support Hall effect crank and cam sensors. Product features include: * Plug-and-play with Holley EFI * CNC-machined billet aluminum housing * Integrated LEDs allow for easy setup * Hardened steel distributor gear
( 1 )
$549.95
$493.95
FAST XDi EZ-RUN distributors are convenient packages that save time and space. These units do not require an ignition box to fire the coil, and their standard-size caps offer more firewall and manifold clearance than HEI-style distributors. XDi EZ-RUN billet distributors feature mechanical and vacuum advance for easy setup and use. They also feature a built-in electronic module that can directly fire an ignition coil, while delivering accurate, dependable, and maintenance-free operation. Ideal for both carbureted and EFI conversion engines, EZ-RUNs are a perfect choice for daily drivers, musclecars, and street rods. FAST XDi EZ-RUN distributors are available for most domestic V8 applications. Choose the model designed for your year/make and engine application.
( 2 )
$297.95
—
$382.95
Allstar Performance ready-to-run distributors deliver point-style size and vacuum advance with electronic ignition technology. They're perfect for early GM cars without clearance for an HEI. The distributor housings are made of CNC-machined 6061-T6 aluminum with an upper support bearing to provide accurate timing at higher rpm. Allstar ready-to-run distributors can use any external stock or performance coil, and they fit small and big block Chevys (except 348 and 409). Distributors include: * Vacuum advance lockout * 3-pin wire harness * Advance springs * Advance stop bushings * Manifold gasket * O-rings * Spark plug wire retainer cap with screws * Instructions
( 1 )
$271.99
On Sale
MechMan 6-phase hairpin high-output alternators offer a solution to the inadequate alternators that come from the factory on specified vehicles. These replacement units feature twin rectifiers with 12 massive press-fit diodes, as compared to the small 8-diode rectifier in the stock alternator. Even mild performance builds will typically consume more amperage than what stock alternators can provide. Hairpin stator technology provides better high-rpm durability and better resistance to heat from the turbo manifold. The alternators utilize a high rpm-friendly larger diameter pulley, and bolt directly in place of the original equipment. Select the high-output racing alternator model recommended for your application. Note: A 4-gauge or larger positive and negative cable needs to be run between the alternator and the battery terminals for proper function.
Not Yet Reviewed
$444.00
$374.00
—
$519.00
The factory alternator on the 2020 and up Ford 7.3 L Godzilla engine is a bulky single or dual alternator design that is tough to package in an engine swap. The Holley Ford 7.3L Godzilla alternator kits provide a more compact solution for extra clearance and works with the factory timing cover, water pump, damper/crank pulley, and intake manifold. They also will work with after-market damper/crank pulley. The bracket and alternator are compact and lightweight, and the Holley alternator is easy to wire and does not require the factory ECU to function like the OE alternator. Holley includes the plug/pigtail, pulleys, and belt in a complete kit. Please note the included belt is for alternator-only applications, but the instructions specify the belt for other configurations. The bracket allows for any accessory configuration, and it works with or without the air conditioning compressor and with or without a power steering pump. Features and details: * Alternator kit and mounting bracket for Ford Godzilla 7.3-liter engine swaps * Great solution with everything needed to add an alternator to the Ford 7.3-liter crate engine * Eliminates bulky dual alternator system—factory setup on some heavy-duty trucks * Works with the factory timing cover, water pump, damper/crank pulley, and intake manifold—also works with after-market damper/crank pulley * Compact design with alternator pulled in tight to the engine for extra clearance under the hood * The mounting bracket is compatible with Holley alternator models: PN: 197-300, 197-301, 197-302, and 197-303 * Easy wiring of alternator and does not require factory ECU to excite alternator—wiring pigtail included * Choose from a complete kit with 105-amp Holley alternator (PN: 20-380), or bracket kit (PN: 97-409) * Natural as cast finish on the mounting bracket and alternator * Works with or without an air conditioning compressor * Works with or without a power steering pump * For alternator-only race setup, Holley bracket PN: 97-409 should be used with Holley premium alternator (PN: 197-302 or 197-303)—ideal for high rpm applications (alternator designed and tested for up to 30 percent higher rpm) * Ideal for use on Godzilla crate engines and engine swaps
Not Yet Reviewed
$449.95
On Sale
These V-Force Plus power control modules are designed for the performance enthusiast who wants improved performance, acceleration, and the ability to monitor vehicle information. V-Force Plus power control modules are designed around a 20 MHz RISC processor. V-Force Plus power control modules optimize ignition advance and fuel maps for optimum horsepower and drivability. In addition, the software in the program allows you to select from 14 different screens to monitor throttle position, mass airflow, manifold pressure, fuel economy, and air/fuel ratio. This allows you to monitor your driving habits for the best fuel economy and performance.
( 12 )
$299.96
$269.96
Standard Motor mass airflow sensors are higher quality, precision alternatives to remanufactured models. MAF sensors measure the amount of airflow entering the intake manifold and must communicate clearly with your vehicle's Engine Control Module (ECM). Remanufactured components with debris from prior use can hinder this communication and cause your vehicle to experience drivability issues. With many new—not remanufactured—MAF sensors in the Standard lineup, they cover more than 90 percent of all MAF-equipped vehicles, and all are airflow-calibrated to ensure accuracy. SMP-manufactured sensors are designed with improvements such as thicker walls, upgraded components, and a custom-designed platinum RTD sensor. The result is a line of MAF sensors that provide highly accurate readings and precise airflow output under all operating conditions. Order the model designed for your car, truck, or van.
( 2 )
$255.99
—
$515.99
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$255.99
—
$476.99
Timing is key in a well-running car, and Allstar Performance high performance distributors can help keep you on target. They have an upper support bearing to provide you with accurate timing at higher rpm. Manufactured from 6061-T6 aluminum and CNC-machined, these housings are built to handle high-rpm stress and remain looking good, too. Designed for use with an aftermarket control box and an external coil, Allstar high performance distributors fit small and big block Chevys and Fords. Allstar high performance distributors will help keep your timing true. Distributors include: * Advance springs * Advance stop bushings * Manifold gasket * O-rings * Spark plug wire retainer cap with screws * Instructions for a no-hassle install
Not Yet Reviewed
$254.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$318.99
FAST MAP sensors, by monitoring intake manifold vacuum, measure the amount of load being placed on the engine. They relay engine load output to the ECU, which in turn adjusts fueling for optimum performance and economy. Choose between 1-bar, 2-bar, 3-bar, and 5-bar MAP sensors.
( 10 )
$279.95
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 25 )
$346.99
We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.
( 5 )
$349.99
—
$389.99
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$499.95
$448.95
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 404 )
$449.95
$403.95
—
$513.95
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1238 )
$292.99
—
$344.99
On Sale
MSD Race Tailored Super Conductor sleeved spark plug wire sets are equipped for the harshest race conditions. These ultimate performance 8.5mm wires combine extremely low resistance with the ability to suppress electromagnetic interference. They now come outfitted with high-temperature, silicone-fiberglass sleeving that protects wires up to 1,000 degrees F! MSD offers their Race Tailored Super Conductors with socket-type or HEI ends for routing under exhaust or over valve covers. Order the set recommended for your vehicle and engine application.
( 13 )
$261.95
On Sale
MSD billet distributors are one of the finest street performance and racing distributors available. The distributor housings are precision-machined on CNC lathes from billet 6061-T6 aluminum to within +/- 1/1,000 in., producing a housing that's stable, lightweight, and less prone to flex. They feature an upper-sealed ball bearing to guide the distributor shaft and prevent shaft wobble at high rpms, and O-rings at the bottom of the base for improved oil control. The shaft is polished and QPQ-coated to minimize friction and allow the distributors to operate through 10,000 rpm. An adjustable mechanical advance assembly allows you to accurately and easily modify the advance curve to match your specific application. MSD premium distributors come complete with a race rotor and alkyd cap.
( 84 )
$526.95
$473.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
