Availability
Showing In Stock Items. Show All 33 Items.
Summit Racing™ Protorque Starters are 100 percent new! Our lightweight Nippondenso-type starters offer a 4.0:1 gear-reduction ratio and a whopping 1.9 HP. That's 222 ft.-lbs of racecar cranking power. If that's not enough cranking power to suit you, there are even more powerful 3.1 hp monsters, which are a pound lighter! They have a 4.44:1 reduction ratio and churn out an awesome 342 ft.-lbs. of torque. Both of our Summit Racing™ powerhouses are suitable for engines up to 502 c.i.d., and compression ratios of up to 18.0:1. GM versions are adjustable for five mounting positions; Ford types, for 18. And, to prevent corrosion and electrical shorts, both starters wear a gold dichromate finish.
( 603 )
$253.99
—
$315.99
XS Power XV Automotive Series lithium batteries are lightweight, powerful, and offer five times the life over lead acid and AGM batteries. These Lithium Titanate batteries are available for automotive applications in many common BCI group sizes for a direct fit in your vehicle.
( 5 )
$484.95
—
$499.99
FuelTech NanoPRO oxygen sensor conditioners have a new design, and with it they are able to condition and read five different models of wide band lambda O2 sensors: * BOSCH LSU 4.2 * BOSCH LSU 4.9 * BOSCH LSU 5.2 * NTK lab grade sensor * NTK wideband o2 sensor Way more than an O2 conditioner, NanoPRO has a 12-way connector with three wire groups. One of them has the connector for the O2 sensor, the second makes the CAN communication with PowerFT ECUs and the third is responsible for power and analog output. These 3-in-1 tools feature an extended wideband reading scale with advanced new hardware for fast and precise readings. Additional features and benefits: * Waterproof (IP67 certified with product harness connected) * 2 in. color display with resistive touch screen * Compatible with 5 different models of O2 sensors * Different fuels AFR or lambda display unit options-- reading range can reach values slightly lower or higher than 0.21 Lambda, depending on the manufacturing characteristics of the sensor: -- Lambda (0.21 - 9.99) -- AFR Methanol (1.35 - 64.6) -- AFR Gasoline (3.09 - 146.6) -- AFR Ethanol (1.89 – 89.9) * CAN communication with PowerFT ECUs: -- Second display gauge function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and much more coming from the FTCAN 2.0, with the possibility of configuring up to five custom screens -- Switch Panel function, touch screen buttons or switches via CAN bus to the PowerFT ECU * Three configurable O2 sensor heating modes: Normal, Fast, and Current Limited, as well as activated by engine rpm or temperature * Advanced heater diagnostics in the PowerFT ECU datalogger * 0 to 5 V analog output for connection with any data acquisition or programmable injection system. * Maximum power supply voltage: 20 V
Not Yet Reviewed
$339.00
Manufacturer Rebate
AutoMeter CAN Bridge data modules are the ideal solution to streamline adding gauges or an InVision LCD dash to OBDII based engine and vehicle platforms (2008+). The intuitive CAN Bridge simply plugs into the diagnostic port and captures the existing sensor data and outputs up to six signals to drive a tachometer, speedometer, temperature, pressure, fuel level (0-90 ohm only), and volts on your vehicle. Quickly and easily setup your system to output the available parameters of your choice by utilizing the CAN Bridge data module's menu navigation buttons and OLED display. With this advanced CAN Bridge system from AutoMeter, you can now simplify your next instrumentation installation on your ride! Additional features: * Works with most OBD-II applications which is standardized across all OEMs starting in 2008 * Module includes OLED display and five push buttons to effortlessly navigate menus and program system for operation * Plug-and-play from OBDII to traditional round AutoMeter short sweep electric gauges, tachometers, electronic speedometers, and InVision LCD dashes * Six total channels available: tachometer, speedometer, fuel level (0-90 ohm only), temp, pressure, and volts * Simplifies instrumentation wiring and installation; no sensors to hookup, which means less wires to connect * Sensor data must be present on the data stream to function, otherwise a discrete sensor must be used
Not Yet Reviewed
$363.99
On Sale
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$368.95
$332.05
On Sale
Take your throttle sensitivity adjustment wireless! Superchips Amp'd 2.0 throttle booster with Bluetooth removes throttle response delays, instantly putting you in total control of your vehicle's throttle response. The wireless Bluetooth switch is an industry-exclusive feature, and the Amp'd 2.0 app provides unparalleled control over your throttle experience. The throttle boosters are pre-loaded with five preset throttle curves and thousands of custom curve possibilities. You paid for a powerful vehicle, and you should have full control over how it drives. Take control with Amp'd 2.0! Features: * Includes mobile app for Android/IOS. * Includes coverage on late-model gas and diesel equipped vehicles * GM/Ford/Dodge/Ram/Toyota/Jeep coverage and more * Increases accelerator pedal response over stock * Reduces dead pedal feeling (acceleration lag) * Works with stock or modified vehicles * Build turbo boost quicker on turbocharged vehicles * Five preset throttle curves * Three customizable throttle slots * Easy installation
( 2 )
$279.95
$251.95
—
$279.95
Scott Drake LED sequential taillight kits give your stock lenses and housings modern signaling. With patented "Smart-Signal" technology and an exclusive "Batwing" design, Scott Drake sequential taillights offer a hassle-free installation--no splicing is required. The LEDs are up to five times brighter than your stock bulbs and they run cooler and use less energy. And, you don't need not buy anything extra, because they work with your factory pieces! Get sequential lighting for your classic Mustang with LED taillight kits from Scott Drake.
( 16 )
$261.95
—
$399.95
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
Kleinn ProBlaster compact dual air horn kits include two tuned trumpets. This set provides everything necessary for a clean installation, while also being compact enough to fit most vehicles. They include a 120 psi, 0.5-gallon air system and are available in chrome or black stealth finishes (model dependent). Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order the Kleinn ProBlaster compact dual air horn kit best suited for your application. More product features, items, and specifications include: * HK1 chrome-plated zinc alloy horn sizes – 8.5 in. and 6.5 in. long (approximately 8.5 in. x 6.5 in. x 3.0 in. assembled) * HK2 spun copper horn sizes – 16.75 in. and 14.5 in. long (approximately 17.0 in. x 8.0 in. x 4.0 in. assembled) * Air compressor – 120 psi (6.2 in. x 3.0 in. x 5.0 in.); 10 percent duty cycle rating; 10-amp draw * Air tank 6260RT with five 1/4 in.-NPT ports; 0.5 gallon (8.0 in. x 6.0 in. x 8.0 in.) * Pressure switch (90 psi on/120 psi off) * Maximum input rating – 120 psi * Rating for cfm at 0 psi – 1.03 (HK1); 1.15 (HK2) * Output – 151.4 dB at 100 psi (HK1); 146.0 at 100 psi (HK2) * Output – 153.6 dB at 150 psi (HK1); 153.5 at 150 psi (HK2) * Drain valve, safety valve, and other fittings * High-pressure nylon air tubing (12 ft.) and horn push button * Wiring/installation kit * HK-2 model available with chrome or XCR2.0 black finish * Detailed installation instructions
( 7 )
$299.95
—
$359.95
Painless Performance Trail Rocker Jeep JK accessory control systems allow you to control up to eight accessories on your Jeep. They feature a waterproof housing that surrounds the power center with eight fuses and relays. Controlling that unit are five pre-wired switches mounted in your custom dashboard panel for a clean, factory look. The power center provides you with all necessary weatherproof connectors and wiring to control your Jeep accessories--from lights to air lockers.
( 7 )
$399.50
—
$466.99
XS Power XV Powersports Series lithium batteries are lightweight, powerful, and offer five times the life over lead acid and AGM batteries. These Lithium Titanate batteries are available for powersports applications in many common BCI group sizes offering a direct fit.
Not Yet Reviewed
$299.99
On Sale
XS Power LI Series 12 V Lithium Powersports batteries are designed with cutting-edge lithium technology for pulse discharge loads and available in a variety of sizes, weights, and output options. These power cells can be mounted in any direction but must be secured from short circuits and movement (optional mounting kits and terminals available separately,). They are an ideal upgrade for stock charging systems found in ATVs, motorcycles, UTVs, and other powersports vehicles. Power your passion with the XS Power LI Series 12 V lithium powersports batteries best suited for your application. Product features and items include: * Lighter than traditional lead-acid batteries * Higher resting voltage for quicker starts thanks to a more consistent/hotter spark * Up to five times longer cycle life with proper installation and charging * Terminal bolts (application dependent) * Detailed instructions * Not intended for use with high-amp audio systems or other high-draw accessories * Near-engine mounting is not recommended unless well-protected from radiant heat and receiving duct-fed cool air * Parallel connection is not recommended and will harm these units if done with non-lithium battery types
Not Yet Reviewed
$309.99
—
$419.99
FuelTech FT550 4-cylinder universal B expansion harnesses complement FuelTech's universal 4-cylinder A harness with the options to control up to eight injectors staged sequentially, have direct connection for inbuilt gear controller, and the additions to inputs and outputs. The harnesses come with a relay with a built-in fuse for power supply to the extra four injectors. The injectors are to be of high impedance only. FuelTech's universal 4-cylinder B harness has a label for each connector and the insulation is heat, moisture, and oil-resistant. Connectors: * FT550 (connector B) * Four EV1 injectors (for high impedance injectors only) * FT CAN B connector * GearController sensor connector * Extra INPUTS connector to custom wire up to five additional input channels for the engine or chassis datalogging--mating connector kit included * Extra OUTPUTS connector to custom wire up to eight additional outputs--mating connector kit included * Relay with fuse for injectors
Not Yet Reviewed
$299.00
Get rid of laggy acceleration and improve throttle response with AEM Electronics throttle control modules! Utilizing five preset and three customizable throttle curve profiles, the downloadable TCM app for iOS and Android phones can easily and wirelessly tailor your desired driving experience. Installation takes only minutes and plugs inline between your vehicle's accelerator pedal harness—no additional wiring is required. The user-friendly and intuitive AEM (TCM) downloadable app puts you in control, allowing you to dial-in your throttle curve just the way you want! Product features and benefits: * Quick and easy plug-and-play design that is removable without a trace * Works on gas, diesel, alternative fuel and Hybrid vehicles * Improves throttle response and transforms the feel of the vehicle * Multiple switchable profiles including various sport modes, eco modes, and custom maps * Bluetooth iOS and Android mobile app * Custom throttle mapping allows you to perfectly tune your throttle pedal * Works on stock and modified vehicles with electronically controlled throttle * No clunky boxes, wires, or controllers like other devices * Connects to the throttle harness, leaving your OBD-II port free
Not Yet Reviewed
$271.95
Ron Francis Wiring's Retro Series Cobra wiring harnesses are similar to their Factory Five wiring harness, except these kits are designed for customers who plan to deviate from the Factory Five instructions, who are building another brand of Cobra-type body, or who are customizing in any other way and need a kit to fit a special application. With a compact and minimal footprint, Ron Francis Retro Series wiring harnesses have 12 circuits available and include color-coded and labeled wire, pre-installed connectors, high-quality relay and flashers, and simple, straightforward instructions.
Not Yet Reviewed
$421.35
Kleinn ProBlaster compact triple air horn kits include three tuned trumpets. This set provides everything necessary for a clean installation, while also being compact enough to fit most vehicles. They include a 130 psi, 1.0-gallon air system and are available in chrome or black stealth finishes. Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order the Kleinn ProBlaster compact triple air horn kit best suited for your application. More product features, items, and specifications include: * Zinc alloy horn sizes – 14.25 in., 11.50 in., and 9.25 in. long (approximately 14.5 in. x 7.0 in. x 6.0 in. assembled) * Air compressor – 130 psi (6.25 in. x 3.5 in. x 5.0 in.); 15 percent duty cycle rating; 14-amp draw * Air tank 6270RT with five 1/4 in.-NPT ports; 1.0 gallon (11.0 in. x 6.0 in. x 8.0 in.) * Pressure switch (100 psi on/130 psi off) * Maximum input rating – 130 psi * Rating for cfm at 0 psi –1.17 * Output –148.7 at 100 psi * Output –152.9 at 150 psi * Drain valve, safety valve, and other fittings * High-pressure nylon air tubing and horn push-button * Wiring/installation kit * Detailed installation instructions
Not Yet Reviewed
$419.95
—
$439.95
Take control of your driving experience with the Bluetooth-enabled aFe Pedal 2 Metal throttle enhancers, expertly designed to eliminate the sluggish throttle response often found in modern drive-by-wire systems. By intercepting and remapping the electronic signals sent to your ECM (Electronic Control Module), Pedal 2 Metal delivers smooth, responsive acceleration that feels both intuitive and controlled. With the aFe Pedal 2 Metal installed, uphill starts, overtaking with a load, and quick gear shifts become effortless. Say goodbye to throttle lag and unlock a throttle response you can tune to match your driving style and road conditions--all with a simple tap on your smartphone. Transform every drive into a more responsive and enjoyable ride, whether navigating city streets, cruising on the highway, or towing with an aFe Pedal 2 Metal throttle enhancer. Features: * Hassle-free, plug-and-play installation -- A simple 5-minute installation using the OE connector located behind the accelerator pedal, integrating seamlessly without any need for wire cutting or modifications -- Compact dimensions for stealthy install under the kick panel * Five driving modes with adjustable sensitivity settings -- Stock -- Economy -- Street -- Performance -- Race -- Fine-tune each mode to match your unique driving style entirely through Bluetooth app available for both iOS and Android * Valet and lockout functions for added security -- Valet mode increases vehicle security when handing off the keys; limits acceleration reducing performance to discourage aggressive driving -- Pedal Lock mode prevents the throttle from opening altogether, offering an extra layer of security against unauthorized use
Not Yet Reviewed
$268.00
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
( 2 )
$399.99
—
$499.97
On Sale
SCT X4 Power Flash programmers arrive to you pre-loaded with dyno-proven tune files for select vehicles, to unlock your vehicle's hidden potential! Programming your vehicle with one of SCT's pre-loaded tune files is as easy as 1-2-3. Simply plug the OBD-II connector into vehicle's OBD-II port, select the pre-loaded tune files using the simple to navigate menu and in minutes the X4 programs your vehicle for your particular driving style. Additional features and facts about SCT X4 Power Flash programmers include: * Stores up to 10 custom tune files * Full color LCD display * High-speed data logging/monitoring * Reads/clears DTC trouble codes * Dual analog inputs * Most popular vehicles supported * Installs quickly and easily * Easy restoration back to stock * User adjustable vehicle parameters * USB Interface cable included
( 98 )
$399.00
$349.00
Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal
( 38 )
$319.00
Odyssey Performance Series batteries are designed to handle the increased use of on board accessories in today's vehicles. They combine long service life, high reliability, and deep cycle capabilities. Performance batteries provide all the reliability of the Odyssey Extreme Series batteries, without the high cold cranking amps or reserve capacity many people may not require. The Performance Series batteries contain flat plates made of 99.99 percent pure lead--not lead alloy, like many conventional batteries.
( 63 )
$361.99
On Sale
SCT Livewire Vision performance monitors can put your vehicle's vital stats on display. This easy-to-use hand-held device includes the latest data-logging capabilities to precisely measure each drive and uncover hidden power potential. Review the data and performance through the use of on-screen, customizable gauges—and extend the possibilities via additional inputs for analog sensors and backup camera, if you like. The SCT Livewire Vision performance monitor can also be used as a diagnostic tool to check and clear trouble codes. The monitor includes a windshield mount, and is compatible with a broad range of car, truck, and van applications.
Not Yet Reviewed
$398.99
$359.00
Say goodbye to that dead, laggy throttle pedal feeling—and enjoy quicker engine response and acceleration with BD Diesel V3.0 throttle sensitivity boosters. They amplify the signal between the throttle pedal and ECM to give a quicker reaction time and force your performance curve to occur sooner, achieving quicker engine response and a "fly back in your seat" feeling. Factory connections mean a painless install, giving you six acceleration levels and a security mode. No need to program; the sophisticated A.I. built into BD Diesel V3.0 throttle sensitivity boosters will do the work for you, learning the appropriate settings for your particular application from your throttle inputs. Order the device recommended for your year, make, and model.
Not Yet Reviewed
$295.95
On Sale
These V-Force Plus power control modules are designed for the performance enthusiast who wants improved performance, acceleration, and the ability to monitor vehicle information. V-Force Plus power control modules are designed around a 20 MHz RISC processor. V-Force Plus power control modules optimize ignition advance and fuel maps for optimum horsepower and drivability. In addition, the software in the program allows you to select from 14 different screens to monitor throttle position, mass airflow, manifold pressure, fuel economy, and air/fuel ratio. This allows you to monitor your driving habits for the best fuel economy and performance.
( 12 )
$299.96
$269.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
