Availability
Showing In Stock Items. Show All 29 Items.
Tilton severe-duty Super Starters pack a lot of power into a compact package--a hefty 3.0 hp, in fact. That's enough to crank over just about anything, and they only weigh about 12 lbs. They feature full ball-bearing or needle-bearing construction that's little affected by heat or cold, and most are "clockable" for multiple choices of solenoid positioning. These starters are recommended for engines over 400 c.i.d., as well as high-compression V8s.
( 34 )
$467.50
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1519 )
$269.99
—
$299.99
TCI Extreme Racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These starters are new, not rebuilt. They not only reduce front-end pounds for better weight distribution, but they will also provide extra room for headers, oil pans, and increased ground clearance as well. TCI Extreme Racing starters are built with full ball bearings for less friction and more torque, a heavy-duty contact disc solenoid for more consistent starts, and a high-temperature, epoxy-encapsulated armature to resist heat and vibration. Their efficient design draws less amperage, leaving more power for your ignition system to keep you in the race.
( 2 )
$407.95
—
$509.95
On Sale
FiTech Go-Spark Ready-To-Run distributors have a built-in module for easy installation with a simple 3-wire hook up, negating the need to run an external ignition control box. They are perfect distributors for a crate engine or when replacing an old points-triggered distributor. Each one features a CNC-machined 6061 T-6 aluminum housing with a centerless ground shaft. The shaft rides on an upper sealed roller bearing with an extended length lower bronze Oil-Lite bushing for smooth operation at high rpms and extended service life. A high-output magnetic pickup and large paddle wheel reluctor provides a strong trigger signal at high rpms, while the built-in high performance inductive storage module supplies unrivaled energy to the coil ensuring maximum performance at all rpm levels. The fully adjustable mechanical advance is welded to the top of the shaft for easy access and is plated to reduce friction and prevent corrosion for long term durability. An adjustable vacuum advance canister allows you to dial in the ideal timing curve to meet your high performance or cruising needs. FiTech Go-Spark Ready-To-Run distributors have caps and rotors molded in high-quality 30+ percent glass fiber reinforced polyester (PBT) that offers both high-impact and dielectric strength while resisting carbon tracking. The cap contacts are brass and the rotor spring is stainless steel for long-term maximum conductivity. With FiTech's 3-year limited warranty, you can be confident in the quality performance of your Hot Rod. Select the ideal distributor for your vehicle.
Not Yet Reviewed
$329.00
—
$375.00
$296.10
—
$337.50
FAST XDi Sportsman distributors are designed to deliver the most accurate trigger signal possible throughout the entire rpm range of your race engine. This is accomplished through the use of an advanced Hall-effect style pickup, which is then converted to a signal that most CD ignition controls accept. The benefit of a Hall-effect pickup is: there is no retard, commonly called magnetic pickup compensation—so you can ensure your timing remains stable from idle to race rpm. Inside the CNC-machined billet housing is a polished stainless steel shaft that is supported with sealed ball bearing on the top and a long bushing on the bottom. They've also reduced end play in the distributor to take out any timing variations and damage to the gear. FAST XDi distributors are supplied with high-quality rotors and caps, and are available with a large diameter Ford-style cap or smaller diameter GM points size cap with HEI terminals, as well as either a steel or bronze gear. Order the Sportsman tailored for your year/make and engine application.
( 1 )
$407.95
—
$439.95
Edelbrock Max-Fire distributors are ready to run right out of the box—and are the perfect upgrade for your ignition system. They're ideal for replacing or upgrading from a points triggered distributor. Max-Fire kits feature precision machining for a perfect fit, along with a simple 3-wire hook-up for an easy installation (with no need to run an external ignition control box). The centerless ground shaft utilizes an upper sealed roller bearing with an extra-long lower bronze Oil-Lite bushing for smooth operation. The high-output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you're getting maximum performance from your engine. (Edelbrock also recommends a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM's.) Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. Order the model recommended for your year/make and engine application.
( 15 )
$487.95
Ford Performance Parts mini high-torque starters are a great addition to your car. They feature a high-output motor with internal gear reduction that provides more cranking power than stock, yet is 30 percent smaller. Their smaller size brings the weight down 5 lbs. from OE starters and provides a great deal more header clearance. These are the perfect starters for vehicles with high-compression engines and tight-fitting headers.
( 80 )
$325.99
—
$432.99
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 898 )
$313.99
—
$341.99
CVR Protorque Ultra starters live up to their name by delivering 250+ lb.-ft. of torque. They feature a specially wound field coil and armature to deliver that torque throughout the cranking range. The machined aluminum adjustable mounting block works with most oversized kickout oil pans, and are great for big cubic inch engines. The starters use a 2.5 kW, 3.4 hp motor that'll support up to 18:1 compression ratio.
( 15 )
$253.99
—
$262.99
CVR Protorque Maximum starters with 3.1 hp and a 4.44:1 gear reduction ratio are sure to get your engine cranking with ease. They feature a unique aluminum housing to eliminate hot start problems and are adjustable (where applicable) to help clear suspension parts, oil pans, and exhaust systems. Protorque Maximum starters are sealed units with rubber O-rings and grommets and also have easily replaceable plungers and contacts.
( 22 )
$291.99
—
$341.99
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 124 )
$449.95
Powermaster Ultra Torque high-speed starters deliver 25 percent more cranking rpm at the flywheel than the standard Ultra Torque starters. They are perfect for use in blown alcohol engines, or any engine requiring higher than normal cranking speed. The Powermaster Ultra Torque high-speed starters feature a 2.2 kW, 3.0 hp motor and have a machined aluminum adjustable mounting block. They will fit all oversized and kickout-style oil pans with no clearance problems.
( 29 )
$347.99
—
$418.99
Powermaster Ultra Torque starters live up to their name by delivering 250+ ft.-lbs. of torque. They feature a machined aluminum adjustable mounting block, work with most oversized kickout oil pans, and work great for big cubic inch engines. The starters use a 2.5 kW, in a 3.4 hp motor.
( 237 )
$297.99
—
$403.99
Summit Racing™ Protorque Starters are 100 percent new! Our lightweight Nippondenso-type starters offer a 4.0:1 gear-reduction ratio and a whopping 1.9 HP. That's 222 ft.-lbs of racecar cranking power. If that's not enough cranking power to suit you, there are even more powerful 3.1 hp monsters, which are a pound lighter! They have a 4.44:1 reduction ratio and churn out an awesome 342 ft.-lbs. of torque. Both of our Summit Racing™ powerhouses are suitable for engines up to 502 c.i.d., and compression ratios of up to 18.0:1. GM versions are adjustable for five mounting positions; Ford types, for 18. And, to prevent corrosion and electrical shorts, both starters wear a gold dichromate finish.
( 600 )
$315.99
Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.
( 164 )
$254.99
MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.
( 20 )
$499.95
CSR Mini High Torque starters offer the ultimate in high-torque, gear-reduction competition starters. They have been race-proven on large cubic inch racing engines, as well as herds of street cars. They're designed to meet the most rigorous demands of today's competition engines and still keep on cranking out the starts.
( 1 )
$319.95
MechMan S Series 6-phase alternators offer incredible output in a compact and durable package. The 240 amp models offer the best balance between peak output, and output at engine idle RPM; while the 320 amp models are all about max power and not designed to charge at low idle speeds. Both S Series alternators feature 12 diodes, twin rectifier plates, and outstanding airflow ensure long service life, even in severe conditions. These units come equipped with a smaller 1.75 in. diameter alternator pulley, and will require a slightly shorter drive belt to be installed for proper belt tension. Order the model recommended for your auto application.
( 30 )
$449.00
—
$524.00
PerTronix Flame-Thrower magnetic trigger billet distributors are perfect alternatives to the more expensive distributors that competitors offer. These distributors feature a precision magnetic pickup coil and reluctor for extremely accurate signaling at low and high rpm. An over-molded magnetic pickup coil supports windings, while providing excellent resistance to corrosion. Tyco Mate-N-Lok connectors work with most ignition system harnesses. A specially engineered reluctor made from lightweight FC-0208 alloy offers superior dimensional stability for symmetrical spark separation. PerTronix Flame-Thrower magnetic trigger billet distributors are compatible with most capacitive discharge ignition boxes.
( 12 )
$379.30
TCI Racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These starters are new, not rebuilt. They not only reduce front-end pounds for better weight distribution, but they will also provide extra room for headers, oil pans, and increased ground clearance. TCI Racing starters are built with full ball bearings for less friction and more torque and a heavy-duty contact disc solenoid for more consistent starts. Their efficient design draws less amperage, leaving more power for your ignition system.
( 9 )
$402.95
Summit Bucks
FAST XDi EZ-RUN distributors are convenient packages that save time and space. These units do not require an ignition box to fire the coil, and their standard-size caps offer more firewall and manifold clearance than HEI-style distributors. XDi EZ-RUN billet distributors feature mechanical and vacuum advance for easy setup and use. They also feature a built-in electronic module that can directly fire an ignition coil, while delivering accurate, dependable, and maintenance-free operation. Ideal for both carbureted and EFI conversion engines, EZ-RUNs are a perfect choice for daily drivers, musclecars, and street rods. FAST XDi EZ-RUN distributors are available for most domestic V8 applications. Choose the model designed for your year/make and engine application.
( 2 )
$382.95
These FAST dual-sync billet distributors are an easy, drop-in, plug-and-play solution for fully sequential high performance V8 electronic fuel injection engine applications. They feature reluctors and pickups that have been properly aligned right out of the box, so you don't have to set crankshaft reference angles or phasing in the rotor prior to installation. The FAST dual-sync billet distributors have housings that are CNC-machined from high-quality 6061-T6 billet aluminum and include adjustable slip collars to ensure perfect cam gear alignment. Using high-output magnetic pickups to generate high-capacity, noise-resistant, discrete switching signals for the FAST XFI ECU, they offer extremely precise ignition timing and long life. Deliver strong, powerful energy to your spark plug wires with one of these FAST dual-sync billet distributors.
( 28 )
$501.95
—
$533.95
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1226 )
$259.99
FAST crank trigger-style distributors are available for a variety of small and big block engine applications. The gears are built from steel, and the housings are billet aluminum with a natural finish. Large distributor caps are included with each unit. Order the model recommended for your vehicle.
Not Yet Reviewed
$328.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
