Availability
Showing In Stock Items. Show All 35 Items.
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$255.65
—
$542.65
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 999 )
$255.65
—
$510.85
MSD three-stage retard controls allow you to retard your ignition timing in three different stages. You can activate one retard for a nitrous stage, and another at top-end in high gear for more mph, and still have another module left over for dual-stage nitrous systems. When activated together, the retard amounts are cumulative, so you get the total of the three. For example, if you pull 2 degrees, then 4 degrees on the second stage, and another 2 degrees at top-end, the total retard is 8 degrees (2+4+2=8). In addition to the individual retard stages, the Three Stage retard controls have an optional start retard function that retards the timing 10 or 25 degrees while cranking the engine. This makes starting high-compression engines with locked-out timing, such as crank trigger systems, much easier. These units easily connect to your MSD Ignition and can be triggered from points, electronic ignitions, crank triggers, or magnetic pickup distributors. They're supplied with a 2, 3, and 4 degree module, and must be used with an MSD 6, SCI, 7, 8, or 10 Series ignition.
( 4 )
$499.95
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 207 )
$255.65
—
$272.10
Stromberg E-Fire electronic distributors actually look like they rightfully belong on your traditional flathead motor. They feature a simple, built-in electronic ignition. No points, no condenser, no black or red box, no maintenance--no worries. These crab-style units bolt on like a stocker with a black cap, and they're easy to properly install with just two wires to your regular coil. Order a Stromberg E-Fire electronic distributor for your Ford flathead and bolt it on—it works straight out of the box! Features and specs: * 2- or 3-bolt mounting options available to match your application * Available in your choice of 6 V positive or 12 V negative ground * Designed as short as possible with hot rod builders in mind, so you can use the stock fan * Timing adjuster is on the side, so you don't have to turn the whole body * Static timing, advance rate and max total advance specifically tuned to suit the flathead V8 * Old-school performance tag with a unique ID number * For use with a points-style 1.5 ohms coil only
( 11 )
$435.00
These MSD 6TN and 6ALN ignitions are the ultimate choices for superior performance in harsh racing conditions. With sturdy vibration mounts and CD circuits encased in a clear 2-part silicone elastomer, they are virtually vibration-proof. A specially designed, weathertight, 6-pin connector meets NASCAR's 20-6.1 ignition wiring rule and provides a tight, positive-locking connection with individual seals to keep dirt and moisture from each connection. The 6TNs are equipped with a special 4-pin connector that plugs directly into an MSD soft touch rev control, while the 6ALNs have a built-in rev control. These rev controls are adjustable with plug-in modules and will save your engine from overrev damage caused by missed shifts or driveline failures. They'll work with virtually any 4, 6 (even-fire V6 only), or 8-cylinder engines.
( 6 )
$522.95
PerTronix Second Strike ignition boxes are the only ignition boxes to provide a powerful second spark throughout the entire rpm range. This is unlike other multiple-spark discharge boxes, which typically drop off to one spark at about 3,000 rpm. They're a micro-controller based ignition that supplements most inductive-type systems (points, GM HEI, Ford TFI and Duraspark, Ignitor® and Ignitor II) with a powerful capacitive discharge second spark, resulting in more complete combustion of the fuel/air mixture. Increased burn time at very high rpm levels also reduces misfires, resulting in more peak horsepower and torque. No special distributor or coil is required. Other features include a five-wire hookup, a tachometer output, a digital rev control, and a crank angle offset, which allows you to time the second spark to occur after the primary spark, in 2 to 18 degree increments.
( 10 )
$436.45
PerTronix Flame-Thrower British engine performance distributors are modeled after the 45D Series distributor. Built using all-new castings, these distributors are precision-machined for an exact fit. They deliver twice the voltage to your spark plugs, increasing horsepower, fuel economy, and spark plug life. Flame-Thrower Performance distributors for British engines feature rotating cobalt magnets that trigger a Hall Effect integrated circuit. There are no points to burn or moving parts to wear out--in fact, you can expect a 2:1 improvement over points in current fall time for increased coil output. Their tailored advance curve provides optimal performance and drivability. PerTronix Flame-Thrower British engine performance distributors are made using an epoxy molding, making the module impervious to oil, grease, dirt, and moisture. Offered for 12 V negative and positive ground systems, these distributors feature stable timing with no need for adjustments.
( 11 )
$368.15
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 328 )
$649.95
$357.95
—
$499.95
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$258.23
—
$398.40
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 356 )
$272.10
—
$464.15
PerTronix is a leading producer of electronic distributors for gas, propane, and LP-powered industrial engines. Many Wisconsin and Continental engines are equipped with these industrial distributors from the factory. Proven performance, reduced maintenance downtime, improved economy, faster starts, and extended tune-up intervals are just some of the great benefits of these distributors. They are also direct replacements for many points-type Delco and Prestolite distributors. Integrated Ignitor electronic ignition technology eliminates the need for points and a condenser. The lightweight, yet durable housing has a superior venting system and O-ring seal to reduce oil leakage around the distributors. Each of these PerTronix industrial distributors comes with a non-tracking cap, rotor, and dust cover.
( 13 )
$272.99
—
$494.40
Davis Unified Ignition Buick Straight 8 D.U.I. distributors will light the fire of your vintage ride. Each of these high-powered ignitions is built with Davis's popular Street/Strip coil—so you can open the plug gaps to a massive .055 in.—and include the high-dwell Dyna-Module that allows the coil to produce a longer duration spark over stock ignitions. The Buick Straight 8 distributors have custom-tuned advance curves, they're all-electric—no points, and installation is easy. Bring your Straight 8 up-to-date by adding some serious firepower with a Buick Straight 8 D.U.I. distributor. Features and benefits include: * Simple one-wire hookup makes installation easier * Allows for wider plug gaps * All electronic ignition—no points * Dyna-Module and 50,000 V coil * Performance-tuned advance curve provides the most power throughout the rpm range, with no pre-detonation * Increased horsepower and fuel mileage * Quicker starting and smoother idle * Easy-to-follow instructions * Backed by a one-year warranty
Not Yet Reviewed
$479.00
Intellitronix Prometheus ignition boxes are designed for critical marine and off-road applications to safeguard against ignition system failures. This patent pending system has several built-in features that protect against dangerous weather hazards. In addition, the self-protection system monitors output current and internal operating temperatures—which provides safety from bad coils, faulty wiring, and system failures—and the box carries a Lifetime Factory Warranty! Additional features: * Unlike other ignition systems on the market, the Prometheus goes into system protect-mode and does not self-destruct or damage other systems * Great for racing applications that do not use an alternator * User-adjustable rev limiter that works with 4-, 6- or 8-cylinder engines * Works with points, OEM, aftermarket electronic or magnetic crank systems * Uses less power than competitor ignition systems, while providing superior performance * Works with any negative ground and 12 V electrical system with a distributor * Comes with a tachometer output wire that can also trigger a shift light or any add-on RPM activated devices
( 2 )
$311.95
There are two ways to limit your rpms. The rough way simply cuts off ignition spark, which can cause backfiring, extreme engine roughness, and possible engine damage. The gentle way is with these MSD Soft Touch rev controllers. They use sophisticated computer circuitry to drop spark one cylinder at a time, until your engine is at or below its maximum rpm. Those cylinders are then fired on the next cycle, to prevent them from loading up with fuel. The result is smooth rev limiting action without all the rough stuff. There are two versions of the Soft Touch rev controllers--one for MSD's 6T, 6TN, 6HVC ignitions, and one for OEM electronic and points ignitions. Both come with 6,000, 7,000, and 8,000 rpm plug-in modules, and can be used with other modules or MSD's RPM module selector.
( 15 )
$275.95
PerTronix Flame-Thrower plug and play billet distributors with Ignitor I® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor I® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor I® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 2 )
$387.25
—
$439.75
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$256.99
—
$351.99
Allstar Performance ready-to-run distributors deliver point-style size and vacuum advance with electronic ignition technology. They're perfect for early GM cars without clearance for an HEI. The distributor housings are made of CNC-machined 6061-T6 aluminum with an upper support bearing to provide accurate timing at higher rpm. Allstar ready-to-run distributors can use any external stock or performance coil, and they fit small and big block Chevys (except 348 and 409). Distributors include: * Vacuum advance lockout * 3-pin wire harness * Advance springs * Advance stop bushings * Manifold gasket * O-rings * Spark plug wire retainer cap with screws * Instructions
( 1 )
$271.99
—
$309.99
Powermaster small frame HPR small frame series alternators produces enough current to keep your electronics running and your battery charged. With over 145 amps at idle and 180 amps at top end, these Hairpin Replacement alternators deliver the charging capabilities you need. Features, specs and items may include: * Efficient internal components produce more output, while consuming less engine power * Voltage compatibility: 12 V * Designed as a direct replacement for four popular housings; straight 6.61 in. mount, 6.14 in straight mount, offset left 5.31 in. mount, and 2 in. spool mount * One-wire connection on most models * Supplied with a V-belt or serpentine pulley * Bolts into many aftermarket front accessory drive systems * Available with different finishes
( 20 )
$306.99
—
$425.99
Denso alternators are not only original equipment on many of the world's top production cars; they are a favorite in motorsports as well, where their light weight, high-efficiency, and durability make them the natural choice. Denso remanufactured alternators go through a grueling process; stators and rectifiers are tested to 300 V, while rotors are submitted to 600 V, to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-specification lubricants. Offered in wide range of amp ratings for hundreds of specific vehicle applications, all alternators meet Denso's rigorous First Time Fit standards. Contemporary vehicles employ dozens of sophisticated electronic systems, placing heavy demands on the charging system. The alternator is no place to cut corners. Additional features of Denso remanufactured alternators include: * Meet or exceed all manufacturer standards, and provide years of reliable service * First Time Fit provides perfect mounting with no belt/pulley alignment issues * Housings re-tapped and damage-checked for heat warping, corrosion, or improper surface alignment * Voltage regulators 100 percent tested to OE standards * All hardware stripped and replated * Premium cores and precise OE-assembly benchmarks * Designed to meet grueling heat and electrical requirements * OE-quality fit and appearance * Full compatibility with sensitive electronics systems
( 42 )
$397.99
Summit Bucks
Your Harley® will run much better with Daytona Twin Tec Model 1005 internal ignition kits versus the older solid-state points eliminator that relied on the mechanical advance flyweights and all that. The "race mode" settings are awesome! They'll wake up your old bike. The advance curve network with adjustable advance slopes will accommodate stock to highly modified engines. You can digitally set the rpm limit, select single or dual fire mode, and multi-spark mode for quick starting and smooth cruising. An optional USB interface and software for programming custom advance curves are available.
Not Yet Reviewed
$514.95
Summit Bucks
Dyna 2Ki Programmable Ignitions not only add to, but extend, many features of the Dyna 2000 modules with a completely new design that fits under the cam cover. Every time power to the ignition is switched on, the 2Ki checks to see if the coil is shorted, mis-wired, or of the wrong type. If an error is detected, the 2Ki will immediately switch off and issue a warning. After starting, the 2Ki continuously monitors the status of the coil and wiring. All 2Ki ignitions are PC programmable: * 8-point fully-definable wide-open throttle curve * 8-point fully-definable part-throttle curve * Rev limit programmable in 50 rpm steps * Programmable dead cranking revs 0-10 * Programmable rear cylinder offset, total of +/- 10 degrees Data recording functions: * Total engine hours * Time at wide-open throttle * Number of engine starts * Longest time operating at wide-open throttle * Maximum rpm * Seconds near rev limit * Statistical analysis of time at rpm Additional features and benefits include: * Single-fire operation down to zero rpm for easier cranking and kicking * Operates in all combinations of single-fire or dual-fire with single plug or dual plug heads (when used with appropriate coils) * Eight advance curves to cover a broad range of engine builds and riding styles * Over-rev protection adjustable from 6000 to 7500 rpm * Adjustable timing retard for nitrous and turbo applications * VOES indicator; shows the status of the VOES switch, also indicates when retard mode is active * Built-in tach driver delivers stable tach signal even during rev limiting; can be used to activate shift lights, auto shifters, and other accessories * Easy static timing with built-in timing indicator (no timing light required) * Intelligent over-current and short circuit protection * Active dwell control continually adjusts coil current to maintain maximum spark energy up to redline while eliminating coil stress caused by overcharging at idle * High-efficiency design reduces battery draw for easier cold weather starting and lower charging system load * Ruggedized output--cannot be damaged by broken or disconnected spark plug wires * Over-voltage protected against momentary spikes (positive and negative) as well as surges caused by faulty voltage regulators or quick-charge battery boosters * Harness constructed with TXL cross-linked polyethylene automotive wire for exceptional resistance to abrasion, heat, and chemical attack * High-temp glass-braid jacket further increases the toughness of the harness and provides a tight, clean appearance * Wire colors closely match the factory harness for error-free installation * Manufactured with premium-quality components designed for operation in a high-temperature, high-vibration environment * One-piece aluminum housing and thermally-conductive epoxy encapsulation provide superior heat dissipation and outstanding shock, vibration, and moisture resistance * Advanced microprocessor technology * Quartz crystal accuracy.
Not Yet Reviewed
$449.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
