Availability
Showing In Stock Items. Show All 33 Items.
We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.
( 5 )
$349.99
—
$389.99
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 357 )
$383.00
—
$464.15
$344.70
—
$417.74
On Sale
MSD Pro-Billet locked-out distributors are built from strong billet aluminum for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft, while an extra-long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high-output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision-manufactured reluctor is responsible for triggering the pickup. Since these distributors are designed primarily for race engines, an oversized (+.006 in.) bronze gear is installed, along with an adjustable slip collar for modified blocks, heads, or intake manifolds.
( 32 )
$468.95
—
$499.95
$421.95
—
$448.95
Davis United Ignition Ford Street/Strip D.U.I. distributors are performance replacements for your daily driver, street rod, or off-road vehicle. Rated at up to 7,000 rpm, these simple all-in-one ignition systems have the coil inside the cap and the module inside of the distributor; drop them in, run one 12 V wire, and you're off with 50,000 V of pure spark energy! The high-voltage coil allows for wider spark plug gaps, while the increased dwell in the D.U.I. Dyna-Module produces a hotter spark to deliver the most complete burn of your fuel mixture. Street/Strip D.U.I. distributors are tuned for several Ford motor applications, creating a super-smooth advance curve and eliminating engine damage. They're built tough with oil-impregnated upper and lower bronze bushings for shaft stability, accurate trigger signals, and years of trouble-free service. D.U.I. caps are offered in red, yellow, black, blue, and clear—so you can watch the sparks fly! Give your ride more power, crisper throttle response, and more low-end torque with a Ford Street/Strip D.U.I. (Davis Unified Ignition) distributor from Performance Distributors.
( 78 )
$459.00
—
$509.00
On Sale
PerTronix Flame-Thrower billet plug and play marine distributors feature the Ignitor II® electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.
( 80 )
$402.60
—
$459.40
$362.34
—
$413.46
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 166 )
$296.95
Clayton Machine ignition coil covers stylishly hide the LS engine coil packs. Unlike the plastic or fiberglass versions, these covers are machined from 6063 T-6 aluminum and can be ordered in black or grey powdercoated finishes; they're also available unfinished so you can customize them to match your vehicle. The covers fit GM LS engines utilizing existing coil bracket mounting points, and are ideal for LS crate motors. (Unless a cutout is fabricated or aftermarket alternator and brackets are used, they will not clear factory high mount alternators, like those found on Corvettes.) Clayton Machine ignition coil covers can be used with relocated coil packs for a lower profile appearance, and are best suited for aftermarket serpentine pulley systems. Additionally, they're available with or without the oil fill hole.
( 11 )
$310.95
—
$392.95
On Sale
FiTech Go-Spark distributors feature 2-wire magnetic pickups, compact bowl and cap designs to fit into locations where a larger or bulkier distributors will not, and adjustable advance systems, vacuum and/or mechanical, that allow you to dial in a timing curve for any high performance need or for more economy when cruising at light loads on the street or highway. CNC-machined housings, centerless ground shafts, Oil-Lite bushings, hardened drive gears, and FiTech's 3-year limited warranty make Go-Spark distributors very popular. Choose one for your vehicle. Features: * CNC machined 6061 T-6 aluminum housing * Centerless ground shaft that rides on an upper sealed roller or ball bearing * Extended length lower bronze Oil-Lite bushing for smooth operation at high rpms * Melonized or hardened iron drive gear ensures long service life * High-output magnetic pickups and paddle wheel reluctors ensure strong, stable trigger signals—even at higher rpms * Cap and rotor are 30 percent glass filled polyester (PBT) that offers high-impact and dielectric strength, and resistance to carbon tracking * Cap contacts are brass, the rotor spring is stainless steel for long-term maximum conductivity * Dual 2-wire magnetic pickup models available--pickups are placed 180 degrees apart to provide a complete redundant ignition system for racing applications * Height adjustment for deck height differences (not all Go-Spark models)
Not Yet Reviewed
$285.00
—
$459.00
$242.25
—
$390.15
On Sale
FiTech Go-Spark Ready-To-Run distributors have a built-in module for easy installation with a simple 3-wire hook up, negating the need to run an external ignition control box. They are perfect distributors for a crate engine or when replacing an old points-triggered distributor. Each one features a CNC-machined 6061 T-6 aluminum housing with a centerless ground shaft. The shaft rides on an upper sealed roller bearing with an extended length lower bronze Oil-Lite bushing for smooth operation at high rpms and extended service life. A high-output magnetic pickup and large paddle wheel reluctor provides a strong trigger signal at high rpms, while the built-in high performance inductive storage module supplies unrivaled energy to the coil ensuring maximum performance at all rpm levels. The fully adjustable mechanical advance is welded to the top of the shaft for easy access and is plated to reduce friction and prevent corrosion for long term durability. An adjustable vacuum advance canister allows you to dial in the ideal timing curve to meet your high performance or cruising needs. FiTech Go-Spark Ready-To-Run distributors have caps and rotors molded in high-quality 30+ percent glass fiber reinforced polyester (PBT) that offers both high-impact and dielectric strength while resisting carbon tracking. The cap contacts are brass and the rotor spring is stainless steel for long-term maximum conductivity. With FiTech's 3-year limited warranty, you can be confident in the quality performance of your Hot Rod. Select the ideal distributor for your vehicle.
Not Yet Reviewed
$309.00
—
$409.00
$262.65
—
$347.65
On Sale
PerTronix Flame-Thrower plug-and-play marine distributors are an amazing piece of equipment that'll have your engine purring like a kitten. They're easy to install; simply connect two wires and you're ready to go. The Ignitor III® module increases spark energy, burn time, horsepower, and mileage, as well as improving combustion. Memory function stores rev limits, while built-in reverse polarity and over-current protection shuts down the system to prevent damage. PerTronix distributors feature lubricated bronze lower bushings and upper ball bearings—which work in conjunction for decreased friction and high rpm vibration—and an adjustable mechanical advance (with limiting functions) permits multiple settings. These distributors are factory set with a performance advance curve, and additional springs are provided for custom advance curves. A suppression style or spiral-wound spark plug wires must be used.
( 1 )
$438.15
—
$463.10
$394.34
—
$416.79
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 370 )
$271.99
—
$484.91
Solve low amperage problems with easy-to-install Powermaster Drag Race alternator kits. They include a one-wire lightweight racing alternator, a hard-coated deep-groove alternator and crank pulley, bracket kit, and a belt. The black, high-heat transfer coating reduces alternator temperatures by 50 degrees F or more, thus prolonging their life and enhancing efficiency. Powermaster dyno-tests each alternator under various loads at variable speeds, and attached a tag with the performance data to each case. They come in your choice of low-mount kits for rail cars, or snug-mount kits for body cars.
( 22 )
$423.99
Powermaster High Mount racing alternator kits are designed to provide your Circle Track application with the power that it needs for optimum performance. These kits come complete with a 70 amp alternator, serpentine belt, pulleys, and all hardware needed for installation.
( 1 )
$366.99
—
$402.99
On Sale
Hypertech's Max Energy power programmers extract every bit of energy possible from every molecule of fuel, increasing miles-per-gallon at part throttle and horsepower at wide-open throttle. Max Energy programmers are even Internet updateable with the included USB cable. Additional features (depending on the vehicle application) include: * Raise the top-speed limiter to match the speed rating of high performance tires * Raise the engine's rpm limiter for increased performance * Adjust individual automatic transmission shift points and shift firmness * Recalibrate speedometer and odometer for non-stock tire sizes and/or gear ratio changes * Lower the cooling fan on/off temperatures to match the thermostat rating * Read and clear diagnostic trouble codes and turn off "check engine" lights * Ability to adjust settings or go back to stock calibration at any time
( 132 )
$399.95
$359.96
Edelbrock Max-Fire distributors are ready to run right out of the box—and are the perfect upgrade for your ignition system. They're ideal for replacing or upgrading from a points triggered distributor. Max-Fire kits feature precision machining for a perfect fit, along with a simple 3-wire hook-up for an easy installation (with no need to run an external ignition control box). The centerless ground shaft utilizes an upper sealed roller bearing with an extra-long lower bronze Oil-Lite bushing for smooth operation. The high-output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you're getting maximum performance from your engine. (Edelbrock also recommends a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM's.) Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. Order the model recommended for your year/make and engine application.
( 15 )
$395.95
—
$494.95
On Sale
JET Performance programmers let you take control and program your own vehicle computer to match your driving style. JET's exclusive Tri-Power tuning allows you to program for performance using lower cost regular octane fuel, or for optimal performance gains you can program for mid-grade or premium fuels. All three tuning modes are designed to operate the engine at peak efficiency based on the octane level being used to improve horsepower and mileage. The programmer will also correct your speedometer and turn off the ABS system trouble light if you change tire size or gear ratios. JET Performance programmers include a built-in scan tool to read and clear diagnostic trouble codes when your check engine light comes on saving you a costly trip to the dealer. The programmer simply plugs into the vehicle's diagnostic port under the dash and then the easy to use installation software allows you to make your changes by answering simple yes or no questions.
( 13 )
$352.46
$317.21
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 3 )
$390.60
—
$523.95
Braille Battery Endurance batteries are quality-built from recycled lead and plastic, equaling a lower cost for you and a benefit for the environment. Technically registered as a "sealed valve regulated" design, their patented AGM technology completely eliminates corrosion on terminals. They're environmentally safe and do not need filling or maintenance. These batteries are available in popular Group 34, Group 48, and Group 49 sizes. They offer direct replacement installation with exclusive performance features that benefit anyone looking to upgrade their vehicle's electrical system for better operation and safety.
Not Yet Reviewed
$379.99
—
$398.99
Intellitronix high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. Order the set designed for your application.
( 2 )
$348.35
Summit Bucks
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 414 )
$419.99
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$299.95
$269.95
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1790 )
$303.99
Tuff Stuff Performance Silver Bullet alternators feature high-tech rotors and stators, built with elevated copper and steel content, to deliver the greatest output with the best reliability. Ultra-low cut-in voltage regulators keep the extra amps flowing in low-idle situations, and a real one-wire hookup (most models) simplifies the installation of these alternators. Silver Bullet alternators have a billet aluminum fan and your choice of a serpentine or V-groove pulley to give them over-the-top styling. They also feature the highest quality neoprene-sealed bearings for long life. Order the model recommended for fitment and performance on your specific vehicle.
( 142 )
$319.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
