Race Electronics Ignitions & Electrical - cable KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Clearance

Racepak EFI V-Net Interface Module Cables

Racepak EFI V-Net Interface module cables are used to convert the serial data stream for an AEM EMS unit into a CAN bus data stream compatible with the RacePak V-Net System. Data from the module is then available for use with the full range of RacePak V-Net devices including on board displays, real time telemetry, and data logging applications.

Not Yet Reviewed

$399.95

$269.50

Biondo Throttle Stops

Biondo CO2-operated throttle stops hook to the throttle linkage and draw only a 1/4 amp. They work with or without a timer, can be used in place of a 2-step box, and won't affect carb or pedal height. A bottle kit is not included.

5.0 out of 5 stars ( 2 )

$262.99

—

$289.99

AiM Sports GPS09 Lap Timers

In the relentless pursuit of excellence, every advantage counts. AiM Sports GPS09 lap timers have emerged as indispensable tools for racers seeking to elevate their performance to new heights. Even the most talented racers can benefit from expert guidance and mentorship. The AiM Sports GPS09 modules offer high-precision, GPS data logging, providing rapid, sub-foot accuracy for lap times, splits, and vehicle dynamics without needing trackside beacons. Key benefits include automatic track recognition, compatibility with over 4,000 tracks in Race Studio 3, enhanced data for driver improvement, and robust, easy-to-install options for various racing vehicles. By providing precision timing, actionable insights, real-time feedback, and a pathway to continuous improvement, the GPS09 lap timers by AiM Sports revolutionize the racing experience, empowering racers to push their limits, unlock their full potential, and chase victory with unwavering determination. Key advantages of the AiM GPS09 modules: * High-precision accuracy—the GPS09 offers positional accuracy of less than one foot, allowing for detailed, precise analysis * Automatic track mapping—the module recognizes circuits and start/finish lines, storing data for up to 50 tracks and 5 splits per track * No beacons needed, they calculate lap and split times without the need for trackside beacons * Comprehensive Data Acquisition—the GPS09 module captures speed, lateral and longitudinal g-forces, and vehicle positioning, which are crucial for performance analysis * Enhanced Data Analysis—these data acquisition components integrate with Race Studio 3 software to provide detailed, actionable insights for improving driving technique * Flexible installation—the modules are available in standard or roof-mount versions (for improved signal in closed cars), and they connect via CAN AiM loggers * Reliable performance—they support both GPS and Glonass signals, ensuring high accuracy

Not Yet Reviewed

$399.00

On Sale

Racepak Analog Pre-Programmed V-Net Modules With Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.

4.62 out of 5 stars ( 13 )

$265.95

—

$377.95

Haltech CAN 15 Button Keypads

With 15 soft touch, ergonomically designed buttons, the Haltech CAN keypad is easy to configure and use. It's a plug-and-play control solution for your Haltech system. The keypad is suitable for NEXUS and Elite devices only; not compatible with Platinum or earlier ECUs. Includes: 15-Button Keypad (3x5), Adaptor Harness DT-4 to DTM-4, DTM to DTM Cable -1200mm, Label Set, Mounting Nut and Washer Kit

Not Yet Reviewed

$435.00

Manufacturer Rebate

Innovate LM-2 Digital Air/Fuel Ratio Meter Basic Kits

These Innovate LM-2 digital air/fuel ratio meter basic kits combine an air/fuel ratio meter and a full-function 32-channel data logger to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, a race carburetor, an aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The Innovate LM-2 digital air/fuel ratio meter basic kits' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. Their self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. They also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2-compatible with all fuel types * OBD-II scan tool reads/clears DTCs and logs up to 16 channels of CAN OBD-II data (cable not included) * Large, high-contrast graphics LCD * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial in and out * USB connection to your PC

3.67 out of 5 stars ( 6 )

$469.99

On Sale

AEM Electronics 22-Channel CAN Sensor Modules

AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit

Not Yet Reviewed

$423.95

$380.95

Racepak Smartwire Switch Modules

Racepak switch modules provide the ability to use existing switches in conjunction with a SmartWire module. Switches are connected to the spade connectors of the module, and switch data is routed to the SmartWire via a single cable. These modules allow your input for 16 remote switches. Adding a second switch module is quick and easy, through the use of a short jumper cable between the two modules. Racepak SmartWire switch modules are machined from billet aluminum and anodized black.

Not Yet Reviewed

$388.95

Racepak Digital Pre-Programmed V-Net Modules With Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.

Not Yet Reviewed

$357.95

—

$409.95

Racepak V-Net Modules

Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.

5.0 out of 5 stars ( 1 )

$306.95

—

$337.95

ARC Sensor Integration Modules

ARC model SIM-8 sensor integration modules will greatly simplify wiring sensors into your ECU. With only one cable wired to the ECU, it provides a convenient hub to tie-in up to eight separate sensors. A green LED indicates the presence of +5 V from the ECU. Each sensor is connected to a 4-position terminal block which has provisions for +5 V from the ECU, ECU ground, signal, and shield. These modules are also available with four ECU controlled relays.

Not Yet Reviewed

$261.99

Racepak Universal Sensor Modules

Racepak universal sensor modules provide an efficient and cost-effective way to add vehicle data sensors. Fully programmable, these modules feature rugged housings with securely mounted O-ring lids, four cable inputs with water-resistant cable strain reliefs, and four molded mounting pads for easier installation. Racepak USMs are designed to allow you to add Racepak or personally supplied sensors to their IQ3 logger dash. Multiple USM 4 sensor input modules can be used in your setup and will create a neat, professional look under your hood. Want to use sensors you already have to save some money? Racepak universal sensor modules are the way to go.

Not Yet Reviewed

$357.95

Computech Vacuum Pressure Monitor Kits

Computech vacuum pressure monitor kits allow you to measure pressures from -14.7 to +30 in. of mercury. With calibration values available for inches of mercury (inHg) or pounds per square inch (psi), they work great for low-range pressures that have a tendency to go into a vacuum state, such as boost pressure. Computech vacuum pressure monitor kits include a stainless steel pressure transducer and a 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.

Not Yet Reviewed

$359.95

Computech 1,500 PSI Pressure Monitor Kits

Computech 1,500 psi pressure monitor kits are great for monitoring nitrous bottle pressure, as well as brake pressure. The pressure sensor will monitor from 0 to 1,500 psi. The kits include a stainless steel pressure transducer and 15 ft. extension cable and are compatible with most gases and fluids, including gasoline, methanol, and oil.

Not Yet Reviewed

$299.95

Racepak Analog Programmable V-Net Modules With Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. These pressure or temperature module/sensor combinations are the same as Racepak analog pre-programmed V-Net modules with sensors except that they have NOT been pre-programmed. Racepak analog programmable V-Net modules with sensors must be programmed using the Configuration File in Datalink software (not included).

Not Yet Reviewed

$337.95

Racepak Un-Programmed V-Net Modules With Sensors

Racepak un-programmed V-Net modules with sensors are customizable for a variety of applications. This makes them ideal whether replacing worn-out/damaged modules, or simply if you prefer your own programming for the V-Net system. The V-Net ID and sensor type parameters will not be pre-programmed on these modules. As with all V-Net modules connecting to the V-Net cable, they feature plug-and-play installation, and can be linked in any sequence. Repair or further customize your setup with Racepak un-programmed V-Net modules. Order the proper base pressure setting for your application.

Not Yet Reviewed

$337.95

Racepak V-Net 2 Axis G-Meters

Racepak V-Net 2-Axis G-Meters are sensor modules that add lateral and acceleration G-force measurement functionality to any Racepak V-Net display or logger dash. As with all V-Net modules connecting to the V-Net cable, they feature plug-and-play installation and can be linked in any sequence. Discover your optimal traction setup and get ahead of the curve with Racepak V-Net 2-Axis G-Meters.

Not Yet Reviewed

$337.95

AiM Sports ACC3 Analog CAN Converters

Enhance your logging performance with AiM Sports ACC3 analog CAN converters. Connectable to most AiM devices, these compact and powerful units manage up to four analog inputs to a maximum frequency of 1 kHz each, and feature two speed inputs at a maximum frequency of 10 kHz. They have an IP65 waterproof rating. Each kit contains a 4-channel split harness and CAN cable. Improve communications with an AiM Sports ACC3 analog CAN converter. Select the kit with the correct harness and cable needed for your AiM setup.

Not Yet Reviewed

$375.00

Computech DataMaxx EGT Modules

Computech DataMaxx EGT modules are designed to allow you to add up to four additional temperature sensors for exhaust gas temperature, cylinder head temperature, oil temperature, or water temperature to your DataMaxx main module. Their CAN-bus wiring only requires a single 4-conductor cable to connect the EGT module to the main module, simplifying installation.

Not Yet Reviewed

$349.95

Computech 15 PSI Pressure Monitor Kits

Computech 15 psi pressure monitor kits are extremely accurate low-range pressure sensors, perfect for monitoring carbureted fuel pressure and boost psi. The pressure sensor will monitor from 0 to 15 psi. The kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.

Not Yet Reviewed

$299.95

Computech Universal Input Shaft Kits

Keep track of your rpm using one of these Computech universal input shaft kits. The kits include a powered hall-effect pick-up sensor, a magnet, and a 15 ft. extension cable.

Not Yet Reviewed

$259.95

Computech 100 PSI Pressure Monitor Kits

Computech 100 psi pressure monitor kits are extremely accurate and will be sure to capture every little pressure change. Measuring accurately throughout the entire zero to 100 psi range, they work great for oil, boost, or fuel psi. The kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.

Not Yet Reviewed

$299.95

Computech DataMaxx Remote SD Modules

Computech DataMaxx Remote SD Modules are designed specifically for vehicles that are using magneto's. Magneto's disperse a wide range of electromagnetic noise and are necessary to get the SD circuit physically far away from that radius of noise corruption. The remote SD modules come with a 15 ft. cable and can also be used as a convenient way to mount them in an easy to reach location.

Not Yet Reviewed

$379.95

AiM Sports String Potentiometers

AiM Sports string potentiometers offer a simple solution to measuring steering inputs. In each of these units, the enclosed rotary potentiometer is activated by pulling the spring-loaded cable. They offer genuine AiM quality and easily connect to their data systems.

Not Yet Reviewed

$252.00

26 Results Found For "cable"