Availability
Showing In Stock Items. Show All 86 Items.
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 371 )
$271.99
—
$484.91
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 26 )
$264.99
—
$359.99
We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.
( 5 )
$349.99
—
$389.99
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1239 )
$259.99
—
$399.99
Finish the swap from fuel injection to a carburetor and distributor using a Summit Racing™ LS front drive distributor timing cover conversion kit. Our front cover and gear assemblies allow you to run your LS-style engine in classes that require a distributor ignition system, while relishing the simplicity and tuneability of a distributor and carburetor. Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits: * Aluminum timing chain cover * Distributor drive gear assembly * Fuel pump eccentric * Color-coded spacers * Front cover crankshaft seal * Adjustable timing pointer * Necessary hardware
( 1 )
$448.99
Upgrade your ignition to the power and performance of a Summit Racing™ system. Our ignition system combos for Chevy V8 feature a Summit Racing™ multi-spark digital capacitive discharge ignition box (with or without rev limiter), a Summit Racing™ billet distributor or blueprinted HEI distributor, and our 51,000 V, 260 milliamp ignition coil (the HEI kit does not include the external coil). The epoxy coil has E-core windings, stud terminals, and an extruded aluminum mount. It measures 3.228 in. tall x 4.553 in. long x 4.519 in. wide.
( 38 )
$304.98
—
$437.97
Mopar and Hemi mean a lot to car guys--they embody power and classic design. Summit Racing™ Mopar Hemi coil-on-plug ignition coils are a great way to match well-engineered engines with the pure power of plasma. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind to provide 20 percent more voltage and 30 percent more spark energy (mj) over stock. All this comes from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you are running a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn!
( 14 )
$479.92
Your Ford is built to eat asphalt and clear its pipes with compacts. Summit Racing™ Ford Mod Motor coil-on-plug ignition coils are engineered to fuel the powerful combustion needed to unleash its inner potential. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind, to provide 40 percent more voltage and 20 percent more energy (mj) from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you're running at increased PSI with a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn! These ignition coils are available in a variety of power options; order the model recommended for your vehicle.
( 60 )
$320.92
Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.
( 165 )
$250.99
—
$304.99
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$305.87
—
$550.88
$254.87
—
$518.28
Our Summit Racing™ computer-controlled billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance.
( 93 )
$255.99
—
$276.99
Summit Racing™ billet aluminum marine distributors are designed as direct replacements for marine applications. The distributors feature an aluminum housing and meet or exceed SAE J1171 standards. When you need a replacement distributor to get your ignition system back to working as it should, you can trust a Summit Racing™ billet aluminum marine distributor.
Not Yet Reviewed
$335.99
Summit Racing™ Pro LS ignition coil covers are a great way to dress up your LS engine. These aluminum coil cover sets have a durable powdercoat finish with an etched Summit Racing™ logo to stylishly hide LS engine coil packs. The covers fit GM LS engines utilizing existing coil bracket mounting points and have an oil fill hole to accommodate the oil fill tube. These covers will not clear factory high-mount alternators, like those found on Corvettes, unless a cutout is fabricated or aftermarket alternator and brackets are used.
( 3 )
$330.99
What do you look for in a race distributor? Probably the first thing is spark power, then overall performance, and finally ease of installation. Performance Distributors has created drop-in, all-in-one spark machines capable of spinning 10,000 rpm! GM Racing D.U.I. distributors incorporate a spark module, inductance coil, and distributor into one simple and strong performance piece. Their built-in ignition module and high-energy coil mean that no external spark boxes or coils are needed; with just one 12 V wire hookup, you're ready to run. These Racing D.U.I.s produce a more intense spark for a more complete burn and more horsepower with minimal amperage draw off of the battery--only 2 to 3 amps. Experience and technology have led Performance Distributors to develop power-producing systems tuned to give you better throttle response and more power. These brand new units have housings that are CNC-machined from billet aluminum and feature two sets of bushings for driveshaft stability. They're available with or without vacuum advance. And, to make them even more appealing, Performance Distributors offers them with blue, black, red, and yellow caps—plus a clear cap so you can watch the sparks fly on your way to more horsepower! See the sparks and turn the revs for your racing powerhouse with GM Racing D.U.I. distributors from Performance Distributors. Order the model designed for your vehicle application.
( 10 )
$429.00
—
$459.00
Flame-Thrower Race HEI distributors from PerTronix produce 42 percent more energy in the coil, with 46 percent faster spark breakdown time. This allows 48 percent more peak current to reach the spark plug, compared to their Street/Strip HEI distributors. That's an enormous improvement over stock HEIs and most aftermarket HEI distributors. A specially designed vacuum lockout mechanism prevents timing adjustments that change rotor phasing, adversely affecting the burn time and efficient fuel combustion. The rotor plates are TIG-welded to the mechanical advance mechanism, preventing high-rpm distortion and improving mechanical reliability. Each distributor uses a new aluminum housing cast and is machined from a strong, but lightweight A384 alloy. They're supplied with a high-dielectric strength cap with solid brass terminals, a balanced rotor, and a low-resistance center coil brush. Also included are nylon rotor hold-down screws and a factory-installed, high performance mechanical curve kit with precision-machined weights and a center plate. A hardened, machined steel gear is standard, along with an electronic module and coil combination that excels in the 6,000 to 8,500 rpm range. These distributors are great for both Circle Track and drag race applications where factory-type HEI distributors are mandated.
( 9 )
$364.27
—
$463.10
FAST XDi Race Cam Sync distributors are an easy solution for those looking to provide an accurate cam sync signal to their aftermarket fuel injection system. Designed for applications that typically use a crank trigger, these distributors enable proper functioning of sequential fuel injection, individual cylinder spark timing, and fuel injector phasing—a must for maximum power and efficiency. Testing has shown the Hall-effect style optical pickup maintains a steady plus/minus 1/2 degree trigger signal, unlike competitors' inductive-style pickups prone to signal drift at high rpm. Ideal for drag racing, high-end street, and marine applications, FAST XDi Race Cam Sync distributors are constructed with a billet housing, precision-ground stainless shaft, and premium bearings. Hand-assembled parts also maintain consistent shaft end play, eliminating another source of triggering fluctuation. Each distributor comes with a precision-machined bronze gear and must be used with a crank trigger and external ignition box. These units are available for a variety of small and big block engine applications.
Not Yet Reviewed
$490.95
FAST XDi Race EFI distributors allow the proper triggering of all EFI systems without compromising rotor phasing—for the most stable ignition timing throughout the entire RPM range. These distributors use an advanced optical trigger to deliver more precise trigger signals (within one-half degree accuracy) than magnetic pickups used by competitors, particularly at high rpm. XDi Race EFI distributors are available for a variety of small and big block engine applications.
Not Yet Reviewed
$429.95
—
$474.95
Proform's Race HEI distributors are the real deal. They're designed to meet the high-performance demands of racing and keep on ticking. The distributors are built with 100 percent new parts, including the housing for guaranteed durability. They come in your choice of polished or unpolished aluminum housings, and four different cap colors. This distributors produce a 50,000 V spark through 7,500 rpm, for an enormous increase over OE HEIs. Also included are a 50 V coil, true spark alignment for instantaneous response, a high-performance curve, a premium cap with brass terminals, and a low-saturation ignition module.
( 82 )
$338.99
—
$339.99
Biondo single shift rpm activated switches can handle up to four adjustable digital shift points. Feature/Spec: * Auto reset--no buttons to press * Shifts from one to four gears * Ignition On/Off input to disable shift output when not in use * Mounting tabs for easy installation * Microprocessor-controlled timing * Retain all numbers when powered off * Large LCD * 3,000-9,900 rpm range can be changed by pushing the buttons on the face of the unit * Test your shifts by holding down either button for two seconds * Two separate outputs--normally open, and closed (for CO2, air, or electric shift applications)
( 8 )
$271.99
On Sale
MSD HVC-2 coils utilize an iron U-core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material. That means it has incredible dielectric capabilities at high temperatures. The housing features far-spaced brass primary terminals, and a well-protected secondary tower for increased spark isolation. HVC-2 coils are designed for use with MSD 7 Series ignitions.
( 28 )
$334.95
—
$364.95
$301.45
—
$328.45
Experts agree that HEI ignition performance relies on a quality module and coil. Pertronix believes the combination of a great module and a great coil makes their Flame-Thrower HEI distributors the best. They've engineered the module and coil to work together to provide you with superior ignition performance on the street or track. Compare the Flame-Thrower high performance module and coil to an original GM HEI distributor and you'll find these improvements: * Operates without misfires up to a minimum of 7,500 rpm, nearly 3,000 rpm higher than most enthusiasts report with their original HEI * Produces 67 percent more energy in the coil * Spark breakdown time (the amount of time until the spark plug has enough voltage to spark) is 45 percent faster, resulting in more accurate timing throughout the rpm range * Delivers twice the energy across the spark gap (during a one-millisecond burn time) * Spark duration and more energy to the spark allow wider plug gaps (.050 in.-.055 in.), increasing flame kernel growth These are dramatic improvements, not just because of a great module and coil, but also because they've been designed to work as a team to produce these results. Models and options are available for applications from the 1950s and up.
( 22 )
$463.10
—
$494.40
Replace and upgrade your Pro Race distributor with FAST fiber optic trigger assemblies. Rated at 200 degrees C, they offer better resistance to underhood temperatures, vibration, and extreme high shock. FAST fiber optic trigger assemblies utilize laser beam technology for trigger event for absolute, most accurate and fastest trigger signal available.
Not Yet Reviewed
$530.96
On Sale
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 37 )
$549.95
$493.95
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 404 )
$749.95
$302.95
—
$525.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
