Availability
Showing In Stock Items. Show All 23 Items.
You don't need a new fuel pump; you need JMS Chip PowerMAX FuelMAX—the "Boost-A" devices that truly deliver! They provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle--up to an 80 percent increase in fuel delivery is possible. PowerMAX FuelMAX voltage boosters feature proprietary enclosures, industrial heat sink, 10-gauge heavy-duty wiring, and either 40 or 80 amp fuses, along with a host of new and innovative features to further improve your experience. Choose from single or dual inputs/outputs, plug-and-play versions, and 3-ways to trigger boosted output. JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump.
( 8 )
$399.75
Improve your times on the quarter-mile with JMS Chip PowerMAX SparkMAX ignition system voltage boosters. Utilizing a traditional or coil-on-plug ignition system, they'll give you increased spark and the highest continuous voltage and amperage output without noise. The kits are shipped complete with everything you need for installation and are designed to be activated at wide-open throttle. Kits include: * PowerMAX device * Heavy-duty, OEM-grade wiring harness * User-adjustable Hobbs pressure switch * 1/8 in. NPT adapter fitting * Wiring terminals * Wire splices and heat shrink * Solder, vacuum line, and tees * Mounting hardware * 40 amp fuses
( 2 )
$419.75
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 164 )
$296.95
Manufacturer Rebate
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 355 )
$433.40
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 123 )
$449.95
—
$499.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$499.95
—
$528.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 800 )
$699.95
$399.95
—
$565.95
FAST XDi EZ-RUN distributors are convenient packages that save time and space. These units do not require an ignition box to fire the coil, and their standard-size caps offer more firewall and manifold clearance than HEI-style distributors. XDi EZ-RUN billet distributors feature mechanical and vacuum advance for easy setup and use. They also feature a built-in electronic module that can directly fire an ignition coil, while delivering accurate, dependable, and maintenance-free operation. Ideal for both carbureted and EFI conversion engines, EZ-RUNs are a perfect choice for daily drivers, musclecars, and street rods. FAST XDi EZ-RUN distributors are available for most domestic V8 applications. Choose the model designed for your year/make and engine application.
( 2 )
$297.95
—
$382.95
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 57 )
$402.99
—
$485.99
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 640 )
$513.95
Edelbrock Max-Fire distributors are ready to run right out of the box—and are the perfect upgrade for your ignition system. They're ideal for replacing or upgrading from a points triggered distributor. Max-Fire kits feature precision machining for a perfect fit, along with a simple 3-wire hook-up for an easy installation (with no need to run an external ignition control box). The centerless ground shaft utilizes an upper sealed roller bearing with an extra-long lower bronze Oil-Lite bushing for smooth operation. The high-output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you're getting maximum performance from your engine. (Edelbrock also recommends a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM's.) Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. Order the model recommended for your year/make and engine application.
( 15 )
$409.95
—
$494.95
MSD billet distributors are one of the finest street performance and racing distributors available. The distributor housings are precision-machined on CNC lathes from billet 6061-T6 aluminum to within +/- 1/1,000 in., producing a housing that's stable, lightweight, and less prone to flex. They feature an upper-sealed ball bearing to guide the distributor shaft and prevent shaft wobble at high rpms, and O-rings at the bottom of the base for improved oil control. The shaft is polished and QPQ-coated to minimize friction and allow the distributors to operate through 10,000 rpm. An adjustable mechanical advance assembly allows you to accurately and easily modify the advance curve to match your specific application. MSD premium distributors come complete with a race rotor and alkyd cap.
( 83 )
$526.95
These FAST dual-sync billet distributors are an easy, drop-in, plug-and-play solution for fully sequential high performance V8 electronic fuel injection engine applications. They feature reluctors and pickups that have been properly aligned right out of the box, so you don't have to set crankshaft reference angles or phasing in the rotor prior to installation. The FAST dual-sync billet distributors have housings that are CNC-machined from high-quality 6061-T6 billet aluminum and include adjustable slip collars to ensure perfect cam gear alignment. Using high-output magnetic pickups to generate high-capacity, noise-resistant, discrete switching signals for the FAST XFI ECU, they offer extremely precise ignition timing and long life. Deliver strong, powerful energy to your spark plug wires with one of these FAST dual-sync billet distributors.
( 28 )
$429.95
—
$545.95
FAST XDi Sportsman distributors are designed to deliver the most accurate trigger signal possible throughout the entire rpm range of your race engine. This is accomplished through the use of an advanced Hall-effect style pickup, which is then converted to a signal that most CD ignition controls accept. The benefit of a Hall-effect pickup is: there is no retard, commonly called magnetic pickup compensation—so you can ensure your timing remains stable from idle to race rpm. Inside the CNC-machined billet housing is a polished stainless steel shaft that is supported with sealed ball bearing on the top and a long bushing on the bottom. They've also reduced end play in the distributor to take out any timing variations and damage to the gear. FAST XDi distributors are supplied with high-quality rotors and caps, and are available with a large diameter Ford-style cap or smaller diameter GM points size cap with HEI terminals, as well as either a steel or bronze gear. Order the Sportsman tailored for your year/make and engine application.
( 1 )
$396.95
—
$454.95
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 200 )
$285.99
—
$288.99
Granatelli Motor Sports ignition system combo kits feature Granatelli's patented 0 ohm wires with extremely low resistance that maintain very high noise suppression. They transmit the full electrical energy of the ignition source to the spark plugs. The end result is increased horsepower, torque, and fuel economy. Order the kit recommended for your vehicle and engine application. Product details: * Direct replacements exceed OEM specifications; OBD-II computer safe * Increase power to the spark plugs up to 400 percent over stock * 0 ohm resistance, no RFI/EMI interference thanks to patented protector ring * Works with all street and race fuel injection systems * Solid stainless steel connector cables and snap-lock spark plug connectors * High-temperature silicone boots; 8mm jackets with fiberglass-reinforced braid resist temperatures up to 500 degrees F * Ideal for use with aftermarket headers or turbocharger systems * Includes all necessary hardware
Not Yet Reviewed
$308.98
FAST crank trigger-style distributors are available for a variety of small and big block engine applications. The gears are built from steel, and the housings are billet aluminum with a natural finish. Large distributor caps are included with each unit. Order the model recommended for your vehicle.
Not Yet Reviewed
$328.95
—
$355.95
FAST XDi Race EFI distributors allow the proper triggering of all EFI systems without compromising rotor phasing—for the most stable ignition timing throughout the entire RPM range. These distributors use an advanced optical trigger to deliver more precise trigger signals (within one-half degree accuracy) than magnetic pickups used by competitors, particularly at high rpm. XDi Race EFI distributors are available for a variety of small and big block engine applications.
Not Yet Reviewed
$429.95
FAST XDi Race Cam Sync distributors are an easy solution for those looking to provide an accurate cam sync signal to their aftermarket fuel injection system. Designed for applications that typically use a crank trigger, these distributors enable proper functioning of sequential fuel injection, individual cylinder spark timing, and fuel injector phasing—a must for maximum power and efficiency. Testing has shown the Hall-effect style optical pickup maintains a steady plus/minus 1/2 degree trigger signal, unlike competitors' inductive-style pickups prone to signal drift at high rpm. Ideal for drag racing, high-end street, and marine applications, FAST XDi Race Cam Sync distributors are constructed with a billet housing, precision-ground stainless shaft, and premium bearings. Hand-assembled parts also maintain consistent shaft end play, eliminating another source of triggering fluctuation. Each distributor comes with a precision-machined bronze gear and must be used with a crank trigger and external ignition box. These units are available for a variety of small and big block engine applications.
Not Yet Reviewed
$490.95
PerTronix's Flame-Thrower Street/Strip HEI distributors will produce 67 percent more energy in the coil, and deliver twice the energy across the spark gap. Plus, they deliver misfire-free performance up to a minimum of 7,500 rpm, a 3,000 rpm improvement over most original HEIs. Each distributor uses a new aluminum housing, cast and machined from a strong but lightweight A384 alloy. High-quality bronze sintered bushings are installed, aligned, and bored for accuracy and extended mileage use. Features include an adjustable vacuum advance, a high-performance mechanical curve kit, aluminum housing, a high dielectric strength cap with solid brass terminals, a balanced rotor, and a centerless-ground shaft.
( 49 )
$351.70
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 100 )
$255.99
—
$347.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
