Ignition Components Ignitions & Electrical - Conversion KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Lingenfelter TRG-002 58x-24x Crank Sensor Trigger Conversion Modules

Lingenfelter TRG-002 58x-24x crank sensor trigger conversion modules have been designed using the latest automotive qualified components with extended temperature range operation. A fast 16-bit microcontroller with an enhanced timer system is utilized to achieve precise signal timing for late model GM engine applications. The Lingenfelter TRG-002 conversion modules allow Gen IV GM V8 engines with the 58X crankshaft trigger wheel and the 4X camshaft timing gear to be installed in earlier vehicles designed to accept the 24X crankshaft trigger wheel and the 1X camshaft trigger wheel--without having to take the engine apart to change the camshaft timing gear or the crankshaft reluctor wheel.

4.67 out of 5 stars ( 33 )

$303.99

Sierra Marine Delco EST Conversion Kits

Sierra Marine Delco EST conversion kits upgrade GM engines with conventional ignition systems to electronic. They are offered for 4-, 6-, and 8-cylinder engines. Sierra Marine Delco EST kits include: * Delco EST (Electronic Spark Timing) distributor * Coil * Ignition wires * Harnesses

5.0 out of 5 stars ( 3 )

$489.99

PerTronix Ignitor® Solid-State Ignition Systems

PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.

4.65 out of 5 stars ( 1006 )

$254.71

—

$496.33

PerTronix Ignitor II® Solid-State Ignition Systems

Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used

4.34 out of 5 stars ( 295 )

$254.71

—

$462.28

Sierra Marine Electronic Distributor Conversion Kits

Sierra Marine electronic distributor conversion kits change GM engines with traditional ignition systems to electronic. They are offered for 4-, 6-, and 8-cylinder engines to improve performance and combustion efficiency. Sierra Marine conversion kits include: * Sierra YLM distributor * Coil * Ignition wires * Harnesses

5.0 out of 5 stars ( 2 )

$289.99

PerTronix Ignitor Lobe Sensor Solid-State Ignition Systems

PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems

4.7 out of 5 stars ( 209 )

$264.60

—

$281.62

PerTronix Ignitor III® Solid-State Ignition Systems

These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.

4.51 out of 5 stars ( 84 )

$254.71

—

$289.90

Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits

Finish the swap from fuel injection to a carburetor and distributor using a Summit Racing™ LS front drive distributor timing cover conversion kit. Our front cover and gear assemblies allow you to run your LS-style engine in classes that require a distributor ignition system, while relishing the simplicity and tuneability of a distributor and carburetor. Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits: * Aluminum timing chain cover * Distributor drive gear assembly * Fuel pump eccentric * Color-coded spacers * Front cover crankshaft seal * Adjustable timing pointer * Necessary hardware

4.0 out of 5 stars ( 2 )

$448.99

On Sale

MSD Ultra 6AL Ignition Boxes

The new Ultra 6AL Series ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Cylinder selection, Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value, Start retard value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard: 0, 10, 20 degrees * Alerts and monitors available * High level of security connection from phone to ignition box (encryption), including sequence in push-button implementation * Maximum programmable retard of 30 degrees * Ignition boxes are available in red or black

4.2 out of 5 stars ( 10 )

$357.95

$322.15

On Sale

MSD Ultra 6AL Plus Ignition Boxes

The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)

3.56 out of 5 stars ( 9 )

$478.95

$430.95

FAST XDi EZ-RUN Distributors

FAST XDi EZ-RUN distributors are convenient packages that save time and space. These units do not require an ignition box to fire the coil, and their standard-size caps offer more firewall and manifold clearance than HEI-style distributors. XDi EZ-RUN billet distributors feature mechanical and vacuum advance for easy setup and use. They also feature a built-in electronic module that can directly fire an ignition coil, while delivering accurate, dependable, and maintenance-free operation. Ideal for both carbureted and EFI conversion engines, EZ-RUNs are a perfect choice for daily drivers, musclecars, and street rods. FAST XDi EZ-RUN distributors are available for most domestic V8 applications. Choose the model designed for your year/make and engine application.

5.0 out of 5 stars ( 2 )

$297.95

—

$382.95

Daytona Twin Tec Model 1005 Internal Ignition Kits

Your Harley® will run much better with Daytona Twin Tec Model 1005 internal ignition kits versus the older solid-state points eliminator that relied on the mechanical advance flyweights and all that. The "race mode" settings are awesome! They'll wake up your old bike. The advance curve network with adjustable advance slopes will accommodate stock to highly modified engines. You can digitally set the rpm limit, select single or dual fire mode, and multi-spark mode for quick starting and smooth cruising. An optional USB interface and software for programming custom advance curves are available.

Not Yet Reviewed

$494.96

12 Results Found For "Conversion"