Availability
Showing In Stock Items. Show All 26 Items.
OER instrument panel carrier assemblies are exact reproductions of the original equipment to match the quality, appearance, and fitment. If you are restoring your classic's interior and are looking for a fresh place to mount all those instrument panel components, choose OER instrument panel carrier assemblies to give them a new home. They are easily modifiable to allow you to incorporate gauge instrumentation and come with the mounting clips.
( 5 )
$312.99
Save time, sensors, and wiring with Classic Instruments' Zeus-Link all -inclusive gauge interface modules. They will read vehicle data from CAN BUS to drive any Classic Instruments gauges accurately. These units are offered in several styles for connection to a GM OBDII port, Holley Sniper ECU and other Holley ECUs, or a Holley Sniper II ECU. Choose the correct module for your application. Additional features of Zeus-Link modules: * System queries vehicle upon installation to determine what list of parameters can be obtained from the vehicle and used as inputs to gauges * Spaces for six standard gauges: speedometer, tachometer, fuel, oil, volt, temperature, and two auxiliary gauges of the customer's choosing * All instruments can be driven traditionally through proper senders if vehicle ECU does not support an output the driver wants to monitor * Set up and managed all through an app available on the App Store or Google Play * The app is used to configure by choosing which gauges a customer has in the dash and how each gauge gets its signal * The app has a virtual gauge screen, aligning with the dash instruments * The app has easy diagnostics, displays values being received by Zeus-Link and will allow user to cycle gauges to predetermined positions, to verify and correct outputs and wiring * Warning and check engine light outputs on the Zeus-Link and external contacts to light a dash light * Dash light connection * All gauge connections to Zeus-Link (power, ground, signal, dash lights) * Additional resistor dongle available if needed to use multiple Holley CAN devices on the same harness * Harness plugs direct into Zeus-Link and then to Holley ECU or OBD * Holley harness has additional Holley ECU connector for other devices * On-board diagnostic lights give status of power, BLE, and data on the circuit board for Zeus-Link * Pass-through CAN port connection for other CAN devices * Compatible with all Classic Instruments sending units and gauges
( 1 )
$399.95
Dakota Digital reproduction instrument bezels are designed to be replicas of the stock trim pieces. They're available in a variety of configurations and finishes to enhance your dash panel. Order the bezels tailored for fitment on your vehicle application—and give your gauges a shiny new look.
( 24 )
$356.25
Manufacturer Rebate
AutoMeter offers direct-fit dash gauge panels to fit dozens of specific vehicle applications. Whether you're updating the look of your original dash, or modifying it with new gauges, these replacement panels are the perfect way to start your project. They're available in thermoformed UV-protected ABS material or polished billet aluminum—in a variety of gauge hole configurations, depending on the application.
( 28 )
$257.99
—
$528.99
On Sale
Brothers Trucks instrument bezels provide an easy way to dress up or refresh the interior of your modern classic GM pickup truck or SUV. The brushed aluminum finish provides that 'deluxe' look and the self-adhesive backing makes installation a snap. Brighten up the inside of your classic ride with an assist from Brothers Trucks instrument bezels.
( 3 )
$261.95
—
$349.95
Manufacturer Rebate
AutoMeter believes in preserving the integrity of your vehicle's interior with top-notch products that match the exceptional quality of their original offerings. AutoMeter replacement InVision dash panels deliver the same level of craftsmanship and attention to detail that made the InVision dash a sight to behold. These quality replacement instrument panels are injection molded to seamlessly integrate with the existing design, providing the correct fit and style, enabling you to restore your InVision dash to its full glory. Available for all the AutoMeter models, select the replacement InVision instrument panel needed and keep your dash looking as stunning as ever.
Not Yet Reviewed
$382.99
—
$398.99
RESTOPARTS® Manufactured injection-molded plastic dash instrument carriers are exact reproductions of the original equipment. These carriers are available with or without air conditioning and Astro Ventilation, and feature the correct grain finish for an authentic appearance, as well as the properly located mounting holes for a perfect fit. Order the RESTOPARTS® injection-molded dash instrument carrier suited to fit your application needs.
( 3 )
$269.99
Ringbrothers billet dash gauge bezel panels are beautiful reproductions of the factory original with contour rounded edges and hole cut-out provisions to surround your gauges. Made to the high-quality standards you can expect from Ringbrothers, these dash gauge cluster bezels are precision machined from 6061 aluminum, and are available in a natural aluminum or black anodized finishes to match your truck's other interior components. For premium parts and accessories to restore, maintain, and customize your Chevrolet, GMC, Dodge or Ford truck, choose Ringbrothers.
Not Yet Reviewed
$500.00
On Sale
Holley EFI 6.86 in. dash bezels are available for muscle car and truck applications. Designed to work with Holley dashes, the bezels are made from a 5/32 in. thick UV-resistant ABS composite material and structurally as strong or stronger than the OEM panels. Holley EFI dash bezels come in a matte black finish that will accent your interior.
( 4 )
$277.95
—
$399.95
Holley EFI 7 in. dash bezels work with your Holley EFI dash for muscle car and truck applications. The bezels feature a quality UV-resistant ABS composite material for strength beyond the OEM panels, and the durable finish will accent your interior. Enhance your vehicle's dashboard with the Holley EFI 7 in. dash bezels designed to fit your application.
Not Yet Reviewed
$399.95
Goodmark instrument carriers are available for a variety of applications. They're perfect for restoring your musclecar. You can count on Goodmark for the right parts for your ride.
Not Yet Reviewed
$253.99
Get your gauges mounted up properly using one of these Clayton Machine direct-fit gauge mounting panels. The mounting panels are manufactured from durable injection-molded plastic and are designed to install in the stock location. These gauge mounting panels are available in a variety of styles and designs to fit your vehicles interior styling and accept factory gauges or aftermarket gauges built to the OEM specifications. Order the Clayton Machine direct-fit gauge mounting panel suited to fit your application needs.
( 3 )
$283.95
You spend a lot of time looking at your gauges and their surroundings when you're cruising in your classic. These OER dash carrier assemblies will ensure that what you're looking at is pure beauty. Made to factory specifications and available for a variety of applications, these OER dash carrier assemblies will have your dash looking like it did before the odometer even rolled over one mile.
( 9 )
$359.99
Holley EFI 7.5 in. dash bezels are designed to work with your Holley EFI dash (sold separately). The dash bezels have a quality UV-resistant ABS composite construction for strength beyond the OEM panels. The bezels are offered in finishes to enhance your vehicle's interior. Order the Holley EFI 7.5 in. dash bezel in the finish and application designed to meet your needs.
Not Yet Reviewed
$399.95
Are you updating to aftermarket gauges? Lokar billet aluminum oval gauge panel dash inserts are designed to mount into the dash when installing your new gauges. They're available in brushed or polished aluminum finishes, so you can create your own look. These inserts come in a variety of styles and in 2, 5, or 6-gauge mounting configurations, so you can arrange the gauges to your preference. Whether you have Autometer, VDO, Stewart Warner, Dolphin, or Classic Industries gauges, Lokar billet aluminum oval gauge panel dash inserts are excellent mounting solutions.
( 2 )
$273.23
—
$385.95
Manufacturer Rebate
AutoMeter DashControl OBDII gauge controllers are, to date, the most advanced way of displaying vehicle data. There's nothing to install, no programing, no changes to your vehicle in any way. Simply plug the unit into your vehicle's OBD-II port—and it turns your factory dashboard display into a fully customizable gauge canvas. See all of the data your vehicle has to offer on your driver information center, heads-up display, or radio. You can also set up visual and audible alerts for any condition or vehicle value. DashControl controllers include two auxiliary 0-5 V inputs, so you can add aftermarket sensors for other values you'd like to monitor. Additional features of Auto Meter DashControl OBDII gauge controllers: * Compatible with vehicles equipped with or without HUD (heads-up display) * Control your NPP/Bi-mode exhaust with your cruise control switch * See boost, fuel pressure, knock retard, and much more using your factory displays * 0-60, 1/8th mile, 1/4 mile, 1/2 mile, and one mile elapsed time recorder * Calculate horsepower and torque * Selectable display location * User upgradeable via free downloads * Zero permanent modifications to vehicle; just unplug and resume * 100 percent warranty friendly—completely reversible by simply unplugging the module * Low power sleep mode ensures your battery will not be drained if DashControl is left in the vehicle
( 2 )
$298.99
—
$307.99
Racepak EFI V-Net Interface module cables are used to convert the serial data stream for an AEM EMS unit into a CAN bus data stream compatible with the RacePak V-Net System. Data from the module is then available for use with the full range of RacePak V-Net devices including on board displays, real time telemetry, and data logging applications.
Not Yet Reviewed
$389.95
OTB Gear Bomber Series gauge dash panels create a truly impressive focal point for your interior. Plus with dozens of combinations available, these versatile 2-piece plates will have a look unique and personal to you. OTB Bomber dash panels start with 1/4 in. thick aluminum base plates in your choice of either a polished or natural finish. Next are the face plates in engine-turned stainless steel or a natural aluminum. They are bonded together with stainless steel rivets that are tapped or pressed into place. Keep it subtle or make it showy … with OTB Gear Bomber Series, it's your choice. Features include: * 5-gauge or 6-gauge variations * Rectangular or oval-shaped designs * Panels accept the popular 2 1/16 in., 2 1/8 in., and 3 3/8 in. gauges * Engine-turned stainless steel has crisp, well-defined patterns—not soft, washed-out swirls * Back plates or aluminum face plates can be finished to match body or interior colors * Aluminum is premium grade 6061-T6, so it can be anodized, chromed, or painted
( 2 )
$359.00
Change the look of your interior with Classic Thunder Road drilled gauge panels. They are application-specific, offering you the freedom to add the gauges of your choice for a totally customized dash. The panels are manufactured from thick, durable ABS plastic and they're available in a variety of finishes to fit your specific style. Now, you can put any type of aftermarket gauge in your muscle car, truck, or street rod with Classic Thunder Road drilled gauge panels.
( 33 )
$379.95
Accutronix T-bar gauge mount adapters give you a place to mount your stock gauge bracket after you switch to T-bar handlebars. These adapters feature a machined quality billet aluminum construction—and they're available in a choice of finishes: chrome, natural aluminum, polished, and black anodized finishes.
Not Yet Reviewed
$277.16
Scott Drake gauge pod faceplates are direct replacements for your worn stock pieces. These faceplates are made from steel and install between the oil pressure and ampere gauges, just below the radio. These top-quality reproductions offer a proper fit, with the same factory finish as the original.
( 1 )
$349.95
Lokar billet aluminum Dolphin gauge panel dash inserts feature a recessed face design. Gauges (not included) mount from the back of the insert. Holding clips and screws are included. Panels are available for 5- or 6-gauge clusters, in a brushed or polished finish.
Not Yet Reviewed
$336.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
