Availability
Showing In Stock Items. Show All 33 Items.
Racers, prepare your engines to run harder, rev higher, and live longer with Isky Racing Tool Room gold stripe racing valve springs. For 9:1 and all-out high-compression oval track engines, you need the racing valve springs with gold stripes. Why? You get the mark of full throttle performance and unsurpassed excellence! Tool Room gold stripe springs are manufactured in the USA by master craftsmen employing the precision winding of premium "super-clean" high-alloy steel. Then, they're super-finished to ensure a seamless and burr-free surface with accurate pitch control and absolute concentric diameters. They utilize state-of-the-art surface conditioning and their trade-secret, high-temperature load retention process to create racing valve springs that you can count on for maximum endurance. Tool Room racing valve springs are put through a rigorous endurance test under actual engine/race track operating conditions where only the strong survive and win their stripes--gold stripes! When you're ready to go for the gold, go with the most durable and fatigue-resistant racing valve springs available--Isky Tool Room gold stripes.
( 1 )
$332.99
—
$456.99
COMP Cams tool steel valve spring retainers are lightweight, high-strength, and have excellent wear characteristics. They're 30 percent stronger than conventional chromoly steel retainers and can withstand even the most demanding engine rpm ranges. Manufactured from high-grade tool steel, COMP Cams tool steel valve spring retainers are the right components to instantly add reliability to your valvetrain.
( 2 )
$475.95
Summit Racing™ Pro LS wrist pins are the toughest on the market—powerfully built for extreme boost and nitrous. They're specifically developed for Summit Racing™ Pro LS pistons and others that use a 2.250 in. pin length for Spiralocks to clear the reluctor ring without notching. Make no mistake, during high-contact stress and impact loading applications, you'll want the confidence that Summit Racing™ Pro LS wrist pins provide! * Part number SUM-S719 is made from H-13 tool steel, an alloy with 289,000 psi tensile strength (vs. common 9310 alloy tool steel pins at 187,000 psi) * Part number SUM-S720 adds diamond-like coating (DLC) to the H-13 tool steel for increased durability, hardness and much lower friction * The DLC wrist pins (SUM-S720) provide better lubricity for use with low-silicon 2618 alloy pistons that may have pin-bore galling issues at the extremes without DLC * H-13 tempers at 1,000 degrees F and readily accepts DLC application (at 400 F) without structural changes * Rockwell hardness: 54 HRC * Increased ductility of 30,500 ksi compared to other materials * Surface-finished to an RA of less than 1 and a concentricity of .000040 in. * 0.215 in. wall-thickness—the thickest on the market for ultimate strength * Only 135 grams * I.D. honed to remove stress-risers
( 4 )
$255.99
Making the weak stronger--fit your Ford 2-bolt main caps with Trick Flow® main stud race-version girdles. What makes them different from their other Ford main stud girdles? These girdles feature 1/2 in. thick tool steel construction, a black oxide finish, and studs--not bolts--for easier installation, even clamping forces, and reduced chance of main cap "walking". If you're racing, tying together your Ford factory 2-bolt main caps with main stud race girdles from Trick Flow® is a move towards strong winning performance!
( 5 )
$256.99
Trick Flow® main stud girdles will strengthen Ford's factory 2-bolt main cap assemblies. Crafted from tool steel and finished with black oxide, these girdles come with main cap bolts and a provision for an oil pump pickup tube hold-down. Tie your Ford caps together for better performance with main cap girdles from Trick Flow®.
( 13 )
$258.99
Increase horsepower with one of these Summit Racing™ rocker arm Pro Packs. They include a set of chromoly steel roller rocker arms to help rid your engine of internal friction. They feature a race-proven, full needle-bearing fulcrum and roller tip. Not only do the Summit Racing™ rocker arm Pro Packs unleash horsepower, but they also lengthen valvetrain component life and reduce wear and tear on valve stem tips. The rocker arms are precision-machined to ensure consistency and ratio accuracy and they have a great looking anodized finish.
( 14 )
$258.98
—
$260.98
PAC Racing 600 Series valve spring retainers are the latest developments from PAC Racing Springs. These retainers feature ultra-lightweight designs from proprietary valve spring-type alloys. PAC Racing's sophisticated processing, such as micro-polishing and Nano Peen technology, are used to enhance retainer life. The high hardness of the steel provides higher wear resistance properties to offer superior abrasion resistance and improved fatigue strength, while also reducing weight. PAC Racing 600 Series valve spring come with a reduced step and need to be combined with a matching seat (where applicable) to optimize the performance of the valvetrain.
Not Yet Reviewed
$409.02
Summit Racing™ Pro LS upgraded rocker arms feature high-quality rocker bodies that utilize the factory style pedestal mount. They are made of high-grade cast steel construction to ensure long-lasting durability and performance. This design replaces the factory bearing and powdered metal trunnion and utilizes a captive bearing design and a bearing steel trunnion. These rocker arms are a perfect upgrade for higher rate springs and performance camshafts. Summit Racing™ Pro LS upgraded rocker arms come preassembled with heavy-duty trunnion kits, which saves you time and the additional cost of an installation tool. Features include: • New body casting includes thicker webbing in critical areas for increased strength • Additional oiling provisions for the bearings • Heavy-duty clips or retainers • Durable captive bearing design and bearing steel trunnion
( 25 )
$326.99
—
$328.99
Improved Racing set out to design the best air-oil separating catch cans specifically for the factory supercharged vehicles. Focused on three simple design goals: maximized efficiency, durability, and ease of use, the development of the CCS oil catch cans happened over several years and included ANSYS Fluent CFD simulations, extensive bench tests, and on-vehicle street and track tests. Final prototype testing also included a 9-month beta testing program in collaboration with various road racers, drag racers, and drifters. The CCS's design maximizes air-oil separation efficiency, resulting in a peak separation efficiency of 85 to 90 percent. For comparison, none of the competitor's catch cans tested showed a peak efficiency of more than 60 percent. The CCS oil catch cans are durable, made from high-quality, reliable components and, as with any Improved Racing product, nothing will vibrate loose or come apart under racing conditions. Keep contaminants out of your intake to increase octane and keep your engine clean with Improved Racing CCS oil catch can kits. Select the kit specifically designed for your application needs. Product details: * The CCS features tangential entry port for cyclonic separation for maximized efficiency—separates as much vapor from crankcase blow-by fumes as possible with minimal restriction * Other features include stainless steel filter with multiple filter seals, primary seal, bell mouth exit plenum, anti-splash-back funnel with spiral drain groves, and 7.0 fluid oz. or 3.5 fluid oz. reservoir * Quick-turn, easy to service reservoir * Includes mounting bracket and custom made, emissions friendly, quick-connect lines—designed specifically for factory supercharged vehicles * CNC-machined aluminum bracket locks into position every 22.5 degrees—allows for different mounting options specific per the make and model vehicle to offset catch can from engine to clear larger engine covers, evap lines, etc. * Optional drain kit (sold separately) is available to allow for remote draining without removing the catch can—because engine bay fitment is tight on specific vehicles * Fast and flexible mounting bracket system for installation/removal and positioning—tool-free bracket nut can be removed without tools, or snug it down with 5/8 in. wrench * No sight glass needed—just push-up and twist a 1/8th turn to remove the reservoir and look inside, no more fumbling, or endless unscrewing to remove the reservoir * A powerful wave spring keeps the reservoir locked in place—included positive safety lock clip is also included just in case you want to be absolutely sure the reservoir cannot be removed
( 2 )
$299.00
—
$329.00
Manley Professional valve springs are constructed from silicon material for oval track racing, or H-11 tool steel for drag racing. No matter what kind of racing you do, Manley has got you covered!
( 3 )
$265.44
—
$426.48
Manley wrist pins are developed from tool steel and are quality-checked for perfect concentricity. The inside walls are inspected for flaws and tooling marks to ensure a smooth finish. Manley wrist pins are available in tapered and straight-wall construction, as well as in various diameters, thicknesses, and lengths to meet your needs.
( 2 )
$322.30
—
$402.87
Mahle Performance piston rings evolved from their pioneering use of piston ring simulation and computer development tools to develop rings that provide "free" horsepower by successfully minimizing friction. A large selection of coordinated piston ring sets is available in a variety of sizes, designs, materials, and coatings designed to exceed your high performance requirements. The difference is evident on the dyno and on the track. Features and benefits of Mahle Performance piston rings: * 1mm and 2mm steel top rings with patented HV385 supersonic thermal-spray process applied for superior bonding, increased durability, and increased scuff resistance * 1.5mm and 1/16 in. positive-twist, ductile iron, barrel-faced, plasma-moly inlaid top rings * Sport compact ring sets ranging from 81-100mm with steel-nitrided top rings * Traditional, reverse-twist, taper-faced (RBT) cast iron second rings * Tapered Hook Groove (THG) second rings that offer superior oil control when compared to traditional RBT rings * 3-piece style oil control rings in both standard and low tension * Standard-tension expanders are sold separately for select low-tension rings where increased oil control is necessary * CP-20 design oil rings that are easier to install; chemically polished for better oil drain-back with a 20 degree ear angle to ensure side seal around the ring
( 54 )
$252.43
—
$541.45
Upgrade your Mustang engine bay with Fathouse Performance billet cap kits. Machined from high-quality 6061 T-6 aluminum and finished in a sleek anodized red or black finish, these kits add a handsome subtle touch to your Mustang GT or Shelby GT's engine bay. Able to install in just minutes with simple hand tools, select the cap kit designed for your Mustang model. Included billet caps: * Coolant reservoir cap * Brake reservoir cap * Oil cap * A/C line caps * Dipstick handle * Washer fluid reservoir cap
Not Yet Reviewed
$349.99
—
$399.99
Carrillo Bullet Series connecting rods are a new idea for high performance rods—at a reasonable price. The rods are manufactured from 4330 modified forgings and balanced to + or - 1 gram. Bullet rods come standard with WMC H-11 tool steel fasteners. Now you can have low cost and Carrillo quality with their innovative Bullet Series. Order the connecting rods designed for fitment with your vehicle make and engine application.
Not Yet Reviewed
$285.08
COMP Cams Endure-X roller lifters set the standard for solid roller lifter technology. The hydraulic roller lifters are designed with oiling and inboard link bars, they're engineered to withstand the demands of aggressive cam lobe designs and increased RPM ranges. The lifters feature a wear-resistant tool steel axle, precision sorted needle bearings, and most applications include EDM oil injection technology that guarantees the bearing assembly receives a constant flow of oil. Endure-X solid roller lifters are heat treated, machined to ultra-high tolerances, and fully rebuildable.
( 40 )
$515.95
When replacing valve and rocker arm components on your motorcycle, make the job easier with Feuling Parts fast-install pushrods. The adjustable rods feature a slightly shorter tapered tube—and they arrive disassembled, so you can install them without removing the top rocker box. Feuling pushrods feature a dual jam nut locking system and include a special tool to hold the tubes up and out of the way while you adjust. These are the longest fast-install pushrods available, compatible with the factory pushrod tubes. The wall thickness is a standard .095 in., and when separate lengths are used for the intake and exhaust, you can experience fast-install pushrods with maximum rigidity and valve lift. Rods are available for various bike applications, including twin-cam and Evolution big twins.
Not Yet Reviewed
$259.95
Sealed Power stock replacement oil pumps meet or exceed OE standards for oil delivery volume and pressure. With cast iron bodies and precision machining, they can be relied upon for adequate lubrication in both stock and mild performance rebuilds. Features include: * Direct replacement * Manufactured to strict engineering quality standards * No special tools required * Constructed of high-quality materials for durability
( 35 )
$282.99
ATI Super Damper Serpentine Series harmonic balancers are patented and feature grooves for serpentine belts machined into the outer damper shell. The dampers come with six outer grooves for standard OEM drive systems—but eight and 10 grooves are available for supercharger or turbo applications. Serpentine dampers are offered in a variety of diameters, and crank hubs may be fitted with a 6-groove serpentine pulley to drive external oil pumps or vehicle accessories. The Serpentine Series Super Dampers fit all ATI GM-front crank hubs and can be adapted to many engine combinations, providing maximum flexibility. They're available in steel or lightweight, hardcoated aluminum. Features and benefits: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * Tunable, rebuildable, and extremely efficient at all rpms * Laser-engraved 360 degree timing marks
( 235 )
$366.00
—
$439.90
On Sale
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 10 )
$299.99
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 10 )
$489.95
If being able to adjust your cam timing quickly and easily is a top priority, then COMP Cams Ultimate Adjustable billet timing sets could be the answer. They have 2-piece billet steel cam sprockets, which let you change cam timing without removing the degree wheel or releasing the valvetrain load, and there's no cam bushing to break. Timing can be varied from 6 degrees retarded to 6 degrees advanced. Chains are heavy-duty, double-row types with hefty 0.250 in. rollers. A one-piece roller thrust bearing handles unwanted end loads.
( 7 )
$271.95
Comp Cams cam phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm Engine oil is pressure-fed to the phasers through passageways in the cylinder heads and cams. The engine computers control solenoids that adjust this oil flow into and out of the phasers' control chambers, creating the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap. COMP Cams cam phaser limiter kits restrict the range of cam timing movement (14 degrees for Chrysler, 20 degrees for Ford, and 22 degrees for GM), thus providing the necessary valve clearance for serious performance cams with tighter lobe separations--all while utilizing the benefits of VVT technology. Gain some serious upper rpm power without sacrificing bottom end or mid-range performance with Comp Cams cam phaser limiter kits.
( 6 )
$281.95
COMP Cams High Energy camshafts are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These cams offer an increase in both gas mileage and power throughout the rpm range for most street applications.
( 61 )
$549.95
Lead the way with strong Carrillo Pro-H connecting rods. Able to handle the most abusive forces of your race engine, these straight H-beams are the stoutest configurations available. Obsessed with perfection, Carrillo produces their Pro-H connecting rods in small batches. They mesh quality materials, precision forging, excellent craftsmanship, and high-tech designs to deliver a flawless performance for your race engine. Applications are available for many venues of motorsports. Drive your racer to the winner's circle with the high performance "choice connection"--Carrillo Pro-H straight H-beam connecting rods.
( 3 )
$371.44
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
