Availability
On Sale
These factory muscle camshafts are reproduced from the factory specs and made to COMP Camps' strict tolerances. Available in several styles, these cams keep that stock fit and great sound and combine it with COMPS Cams' incredible performance.
( 16 )
$258.95
—
$341.95
Summit Racing™ Pro LS/LT Factory Cams are offered as an affordable, high quality, option to replace a worn or damaged factory camshaft. The cams are built for dependability, made on 5150 bearing steel blanks and finished on CNC grinders and polishers. These grinds are identical to factory, so no changes should be expected in emissions or tuning. Make sure to check them out on your next rebuild or AFM repair.
Not Yet Reviewed
$269.99
—
$299.99
COMP Cams Factory Muscle cam and lifter kits are reproduced from OE specs and engineered to strict tolerances. They're available in mechanical and hydraulic flat tappet styles, for use on the street or strip. Choose the model and performance options designed for your vehicle and engine application. You'll enjoy a stock fit and great sound with a COMP Cams Factory Muscle kit.
Not Yet Reviewed
$442.95
Mast Motorsports Factory Mast valve spring kits are available to fit Mast LT and GM OE casting heads and factory valve guides. Dual spring kits for high-lift LT cylinder heads are rated for light to moderate endurance, and works well for limited travel hydraulic lifter or light duty solid rollers. Features and details: * Machined and hardened black oxide precision spring seats * Premium chrome silicon vanadium spring wire * Polished Isotropic Super Finishing and Cryo Treated * Titanium 6AL4V Grade 5 Titanium retainers Kit includes: * Dual valve springs * Titanium retainers * Custom thick chromoly spring seats * Valve stem seals * Billet machined chromoly valve locks
Not Yet Reviewed
$299.00
—
$325.00
BTR Platinum valve spring kits are dual-spring kits, highly recommended when upgrading to an aftermarket camshaft. Each assembly was created to fill the need for high performance—and comes with quality dual-valve springs, titanium or chromoly retainers, locks, seals, and locators for stock or bronze guides. Build a better high performance cam with BTR valve spring kits! Order the material and stem seal color you prefer, and the model recommended for use with your engine application.
( 17 )
$319.99
—
$369.99
Summit Racing™ Pro LS Single Plane cams are affordable and designed for racing applications where a carburetor and open exhaust are commonly found. These cams have slightly narrower lobe separation to increase torque and compliment short runner intakes. They come in distinct cam timing increments to give you maximum control over the power band. They're also designed with longevity in mind by taking stress off the valvetrain. These lobes remain stable to over 7,000 rpm with a common .600 and .670 lift dual spring kits.
( 21 )
$299.99
Upgrade your transmission cooling with a Fluidyne high performance bar and plate transmission fluid cooler. Designed for the 2020-24 GM 6.6L Duramax, these coolers offer 4x the heat dissipation of factory models, ensuring your transmission runs cooler and more efficiently. With the densest fins per inch in the market, Fluidyne coolers provide superior cooling performance. All internal splitter plates are fully welded, preventing fluid contamination between the cold and hot side fluids. Built from aerospace-grade aluminum with bar plate construction, each unit offers maximum cooling with minimal pressure drop. These direct replacements use existing factory mounts for easy installation. Additional details: * Enhanced heat dissipation * Direct bolt in replacement * Densest fins per inch * Proprietary fin design for highest performance * Powdercoated with a proprietary heat-wicking compound * Over 4x the heat exchanging capacity compared to the stock cooler
Not Yet Reviewed
$499.00
COMP Cams gear drives offer the ultimate in jaw-dropping high performance and sound. COMP Cams gear drives feature high-strength billet gears, multi-keyway adjustability (+/-4 degrees), and precision tolerances.
( 8 )
$270.95
—
$313.95
Holley Ford 7.3L Godzilla cast aluminum timing covers are available in natural and black powdercoated styles to fit Godzilla engines with Holley's high-mount accessory drive system with Holley pan or OE pan. Choose the correct one for your Holley Godzilla system.
Not Yet Reviewed
$281.65
With the installation an Improved Racing crank scraper and windage tray kit, you'll enjoy additional horsepower and improved oil control from your factory 3.622 in. or aftermarket 4.000 in. stroke LS engine. They reduce oil starvation by closely following the contours of the crankshaft and connecting rods to remove excess oil, ensuring oil is quickly returned to the bottom of the sump. The kits also reduce parasitic drag and windage losses caused by excess oil on the crank, reducing rotational mass and providing dyno-proven gains. Scraper/windage tray kits are available for most factory and aftermarket oil pan setups, and include a crank scraper (CNC-machined from 0.190 in. thick 6061-T6 billet aluminum) and aluminum windage tray (made from 5052-H32 aluminum) that provides more clearance for aftermarket rods than factory windage trays. The windage tray bolts directly to the scraper with self-clinching lock nuts instead of the main cap studs, so they can be installed without disturbing the alignment of the scraper. Features and benefits include: * No modifications required to OE oil pump pickup tube * Bolt-on installation * 70 percent stronger and 10 percent lighter than OE windage trays * Lifetime warranty * Minor clearancing around counterweights may be required for aftermarket 4.000 in. stroker crankshafts
Not Yet Reviewed
$279.00
—
$299.00
OMIX-ADA offers valve covers for a large range of Jeep applications. These valve covers are ideal replacements and great for restorations. They're constructed from top-quality materials and meet or exceed OE specifications.
( 31 )
$274.99
Summit Racing™ Pro LS upgraded rocker arms feature high-quality rocker bodies that utilize the factory style pedestal mount. They are made of high-grade cast steel construction to ensure long-lasting durability and performance. This design replaces the factory bearing and powdered metal trunnion and utilizes a captive bearing design and a bearing steel trunnion. These rocker arms are a perfect upgrade for higher rate springs and performance camshafts. Summit Racing™ Pro LS upgraded rocker arms come preassembled with heavy-duty trunnion kits, which saves you time and the additional cost of an installation tool. Features include: • New body casting includes thicker webbing in critical areas for increased strength • Additional oiling provisions for the bearings • Heavy-duty clips or retainers • Durable captive bearing design and bearing steel trunnion
( 25 )
$326.99
—
$328.99
Put an LS series engine in your musclecar. These Chevrolet Performance musclecar oil pan kits are designed to fit most 1955-85 GM front engine, rear-wheel drive factory V8 passenger cars. Features include: * 5 qt. capacity aluminum wet sump oil pan * Dipstick and tube * Gaskets * Pickup tube * Windage tray * All mounting hardware
( 144 )
$300.47
Swapping a GM LS-based engine just got a lot easier! Summit Racing™ LS oil pans are specifically designed to install an LS engine in a variety of GM muscle car and truck chassis. These pans offer OEM fitment, oil filter mounting, and use factory-style gaskets. They're manufactured from steel and are offered in zinc, black powdercoat, and chrome finishes. Summit Racing™ LS oil pans will clear up to a 4.125 in. stroke and are available individually or in kit form (with gaskets, pickup, and hardware included).
( 49 )
$317.99
—
$423.99
Composed of lightweight cast aluminum, Top Street Performance LS aluminum rear sump retrofit oil pans allow for increased ground clearance. Featuring a low-profile, the oil pans are designed to fit many GM rear-wheel drive applications originally equipped with a small or big block Chevy engine and factory rear sump pan. They are meticulously engineered to mount perfectly to any wet-sump LS engine and take the stock oil filter. Order the model designed to fit your application.
( 6 )
$252.00
—
$365.00
Ford Performance Parts 5.0L/5.2L aluminum valve covers allow much greater dissipation and protection from exhaust manifold heat, thanks to the included foil tape along the cylinder head mating surface. This pair of cam covers retain factory coil cover provisions and the oil separator drain-back port that can be used with air/oil separator kits. Ford Performance Parts 5.0L/5.2L aluminum cam covers fit 2011-17 5.0L and 2015-19 5.2L engines. Features, items, and notes: * Can be powdercoated to customize your vehicle * 1 pair of camshaft (valve) covers * Camshaft cover gaskets * VCT solenoid grommets * Fasteners * Engine oil cap * F-150 engines will require the Coyote cam cover ball stud kit (M-6067B-F150) to install coil covers
( 20 )
$315.99
PROMAXX Performance stock replacement cylinder heads are designed to be a direct replacement for your worn or cracked heads. These are new castings, modeled off OE castings for factory fit and finish. Some applications feature a thicker deck to solve common warping or cracking issues. Instead of spending the time and money refurbishing your existing heads, use PROMAXX Performance stock replacement cylinder heads.
( 7 )
$478.00
On Sale
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$464.95
—
$549.95
$417.95
—
$493.95
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 143 )
$699.95
$252.95
—
$499.95
Briggs & Stratton LO206 sealed short block engines are great pieces to give your 206 engine a fresh bottom end. Each short block is assembled with a piston and crank. They are factory sealed for integrity and consistency regarding rule parity and ease of maintenance for many racers. Revive your tired engine with help from Briggs & Stratton sealed short blocks.
Not Yet Reviewed
$369.99
Improved Racing set out to design the best air-oil separating catch cans specifically for the factory supercharged vehicles. Focused on three simple design goals: maximized efficiency, durability, and ease of use, the development of the CCS oil catch cans happened over several years and included ANSYS Fluent CFD simulations, extensive bench tests, and on-vehicle street and track tests. Final prototype testing also included a 9-month beta testing program in collaboration with various road racers, drag racers, and drifters. The CCS's design maximizes air-oil separation efficiency, resulting in a peak separation efficiency of 85 to 90 percent. For comparison, none of the competitor's catch cans tested showed a peak efficiency of more than 60 percent. The CCS oil catch cans are durable, made from high-quality, reliable components and, as with any Improved Racing product, nothing will vibrate loose or come apart under racing conditions. Keep contaminants out of your intake to increase octane and keep your engine clean with Improved Racing CCS oil catch can kits. Select the kit specifically designed for your application needs. Product details: * The CCS features tangential entry port for cyclonic separation for maximized efficiency—separates as much vapor from crankcase blow-by fumes as possible with minimal restriction * Other features include stainless steel filter with multiple filter seals, primary seal, bell mouth exit plenum, anti-splash-back funnel with spiral drain groves, and 7.0 fluid oz. or 3.5 fluid oz. reservoir * Quick-turn, easy to service reservoir * Includes mounting bracket and custom made, emissions friendly, quick-connect lines—designed specifically for factory supercharged vehicles * CNC-machined aluminum bracket locks into position every 22.5 degrees—allows for different mounting options specific per the make and model vehicle to offset catch can from engine to clear larger engine covers, evap lines, etc. * Optional drain kit (sold separately) is available to allow for remote draining without removing the catch can—because engine bay fitment is tight on specific vehicles * Fast and flexible mounting bracket system for installation/removal and positioning—tool-free bracket nut can be removed without tools, or snug it down with 5/8 in. wrench * No sight glass needed—just push-up and twist a 1/8th turn to remove the reservoir and look inside, no more fumbling, or endless unscrewing to remove the reservoir * A powerful wave spring keeps the reservoir locked in place—included positive safety lock clip is also included just in case you want to be absolutely sure the reservoir cannot be removed
( 2 )
$299.00
—
$349.00
Whether you're building a tow rig, race truck, or just want to keep your daily driver on the road for the long haul, you need to upgrade your head bolts with Gator Fasteners heavy-duty head stud kits. Gator head studs have a much higher strength and will not stretch like the factory bolts, helping to keep your truck from popping head gaskets. Designed for stock to moderately built engines. Gator studs are manufactured with 8740 material with an added proprietary element and black oxide finished. They are rated at 220,000 psi tensile strength, providing the clamping force required to keep cylinder heads from lifting due to higher combustion pressures. Choose the head stud kit designed for your truck.
( 2 )
$349.99
—
$449.99
Eliminate possible leaks at the front of your engine with one of these Proform diecast aluminum timing chain covers. They are manufactured from 100 percent diecast aluminum and are built to exact factory specifications and tolerances. The covers are available for a variety of engines and configurations, so we're sure to have your application covered.
( 28 )
$271.99
Making the weak stronger--fit your Ford 2-bolt main caps with Trick Flow® main stud race-version girdles. What makes them different from their other Ford main stud girdles? These girdles feature 1/2 in. thick tool steel construction, a black oxide finish, and studs--not bolts--for easier installation, even clamping forces, and reduced chance of main cap "walking". If you're racing, tying together your Ford factory 2-bolt main caps with main stud race girdles from Trick Flow® is a move towards strong winning performance!
( 5 )
$256.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
