Availability
Showing In Stock Items. Show All 184 Items.
On Sale
These factory muscle camshafts are reproduced from the factory specs and made to COMP Camps' strict tolerances. Available in several styles, these cams keep that stock fit and great sound and combine it with COMPS Cams' incredible performance.
( 16 )
$258.95
—
$341.95
Summit Racing™ Pro LS/LT Factory Cams are offered as an affordable, high quality, option to replace a worn or damaged factory camshaft. The cams are built for dependability, made on 5150 bearing steel blanks and finished on CNC grinders and polishers. These grinds are identical to factory, so no changes should be expected in emissions or tuning. Make sure to check them out on your next rebuild or AFM repair.
Not Yet Reviewed
$269.99
—
$299.99
BTR Platinum valve spring kits are dual-spring kits, highly recommended when upgrading to an aftermarket camshaft. Each assembly was created to fill the need for high performance—and comes with quality dual-valve springs, titanium or chromoly retainers, locks, seals, and locators for stock or bronze guides. Build a better high performance cam with BTR valve spring kits! Order the material and stem seal color you prefer, and the model recommended for use with your engine application.
( 17 )
$319.99
—
$369.99
Summit Racing™ Pro LS Single Plane cams are affordable and designed for racing applications where a carburetor and open exhaust are commonly found. These cams have slightly narrower lobe separation to increase torque and compliment short runner intakes. They come in distinct cam timing increments to give you maximum control over the power band. They're also designed with longevity in mind by taking stress off the valvetrain. These lobes remain stable to over 7,000 rpm with a common .600 and .670 lift dual spring kits.
( 21 )
$299.99
Upgrade your transmission cooling with a Fluidyne high performance bar and plate transmission fluid cooler. Designed for the 2020-24 GM 6.6L Duramax, these coolers offer 4x the heat dissipation of factory models, ensuring your transmission runs cooler and more efficiently. With the densest fins per inch in the market, Fluidyne coolers provide superior cooling performance. All internal splitter plates are fully welded, preventing fluid contamination between the cold and hot side fluids. Built from aerospace-grade aluminum with bar plate construction, each unit offers maximum cooling with minimal pressure drop. These direct replacements use existing factory mounts for easy installation. Additional details: * Enhanced heat dissipation * Direct bolt in replacement * Densest fins per inch * Proprietary fin design for highest performance * Powdercoated with a proprietary heat-wicking compound * Over 4x the heat exchanging capacity compared to the stock cooler
Not Yet Reviewed
$499.00
COMP Cams gear drives offer the ultimate in jaw-dropping high performance and sound. COMP Cams gear drives feature high-strength billet gears, multi-keyway adjustability (+/-4 degrees), and precision tolerances.
( 8 )
$270.95
—
$313.95
Holley Ford 7.3L Godzilla cast aluminum timing covers are available in natural and black powdercoated styles to fit Godzilla engines with Holley's high-mount accessory drive system with Holley pan or OE pan. Choose the correct one for your Holley Godzilla system.
Not Yet Reviewed
$281.65
Summit Racing™ Pro LS upgraded rocker arms feature high-quality rocker bodies that utilize the factory style pedestal mount. They are made of high-grade cast steel construction to ensure long-lasting durability and performance. This design replaces the factory bearing and powdered metal trunnion and utilizes a captive bearing design and a bearing steel trunnion. These rocker arms are a perfect upgrade for higher rate springs and performance camshafts. Summit Racing™ Pro LS upgraded rocker arms come preassembled with heavy-duty trunnion kits, which saves you time and the additional cost of an installation tool. Features include: • New body casting includes thicker webbing in critical areas for increased strength • Additional oiling provisions for the bearings • Heavy-duty clips or retainers • Durable captive bearing design and bearing steel trunnion
( 25 )
$326.99
—
$328.99
Put an LS series engine in your musclecar. These Chevrolet Performance musclecar oil pan kits are designed to fit most 1955-85 GM front engine, rear-wheel drive factory V8 passenger cars. Features include: * 5 qt. capacity aluminum wet sump oil pan * Dipstick and tube * Gaskets * Pickup tube * Windage tray * All mounting hardware
( 144 )
$300.47
Composed of lightweight cast aluminum, Top Street Performance LS aluminum rear sump retrofit oil pans allow for increased ground clearance. Featuring a low-profile, the oil pans are designed to fit many GM rear-wheel drive applications originally equipped with a small or big block Chevy engine and factory rear sump pan. They are meticulously engineered to mount perfectly to any wet-sump LS engine and take the stock oil filter. Order the model designed to fit your application.
( 6 )
$252.00
—
$365.00
Swapping a GM LS-based engine just got a lot easier! Summit Racing™ LS oil pans are specifically designed to install an LS engine in a variety of GM muscle car and truck chassis. These pans offer OEM fitment, oil filter mounting, and use factory-style gaskets. They're manufactured from steel and are offered in zinc, black powdercoat, and chrome finishes. Summit Racing™ LS oil pans will clear up to a 4.125 in. stroke and are available individually or in kit form (with gaskets, pickup, and hardware included).
( 49 )
$317.99
—
$423.99
PROMAXX Performance stock replacement cylinder heads are designed to be a direct replacement for your worn or cracked heads. These are new castings, modeled off OE castings for factory fit and finish. Some applications feature a thicker deck to solve common warping or cracking issues. Instead of spending the time and money refurbishing your existing heads, use PROMAXX Performance stock replacement cylinder heads.
( 7 )
$478.00
On Sale
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$464.95
—
$549.95
$417.95
—
$493.95
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 143 )
$699.95
$252.95
—
$454.95
Briggs & Stratton LO206 sealed short block engines are great pieces to give your 206 engine a fresh bottom end. Each short block is assembled with a piston and crank. They are factory sealed for integrity and consistency regarding rule parity and ease of maintenance for many racers. Revive your tired engine with help from Briggs & Stratton sealed short blocks.
Not Yet Reviewed
$369.99
Ford Performance Parts 5.0L/5.2L aluminum valve covers allow much greater dissipation and protection from exhaust manifold heat, thanks to the included foil tape along the cylinder head mating surface. This pair of cam covers retain factory coil cover provisions and the oil separator drain-back port that can be used with air/oil separator kits. Ford Performance Parts 5.0L/5.2L aluminum cam covers fit 2011-17 5.0L and 2015-19 5.2L engines. Features, items, and notes: * Can be powdercoated to customize your vehicle * 1 pair of camshaft (valve) covers * Camshaft cover gaskets * VCT solenoid grommets * Fasteners * Engine oil cap * F-150 engines will require the Coyote cam cover ball stud kit (M-6067B-F150) to install coil covers
( 20 )
$315.99
Eliminate possible leaks at the front of your engine with one of these Proform diecast aluminum timing chain covers. They are manufactured from 100 percent diecast aluminum and are built to exact factory specifications and tolerances. The covers are available for a variety of engines and configurations, so we're sure to have your application covered.
( 28 )
$271.99
Whether you're building a tow rig, race truck, or just want to keep your daily driver on the road for the long haul, you need to upgrade your head bolts with Gator Fasteners heavy-duty head stud kits. Gator head studs have a much higher strength and will not stretch like the factory bolts, helping to keep your truck from popping head gaskets. Designed for stock to moderately built engines. Gator studs are manufactured with 8740 material with an added proprietary element and black oxide finished. They are rated at 220,000 psi tensile strength, providing the clamping force required to keep cylinder heads from lifting due to higher combustion pressures. Choose the head stud kit designed for your truck.
( 2 )
$349.99
—
$549.99
Improved Racing set out to design the best air-oil separating catch cans specifically for the factory supercharged vehicles. Focused on three simple design goals: maximized efficiency, durability, and ease of use, the development of the CCS oil catch cans happened over several years and included ANSYS Fluent CFD simulations, extensive bench tests, and on-vehicle street and track tests. Final prototype testing also included a 9-month beta testing program in collaboration with various road racers, drag racers, and drifters. The CCS's design maximizes air-oil separation efficiency, resulting in a peak separation efficiency of 85 to 90 percent. For comparison, none of the competitor's catch cans tested showed a peak efficiency of more than 60 percent. The CCS oil catch cans are durable, made from high-quality, reliable components and, as with any Improved Racing product, nothing will vibrate loose or come apart under racing conditions. Keep contaminants out of your intake to increase octane and keep your engine clean with Improved Racing CCS oil catch can kits. Select the kit specifically designed for your application needs. Product details: * The CCS features tangential entry port for cyclonic separation for maximized efficiency—separates as much vapor from crankcase blow-by fumes as possible with minimal restriction * Other features include stainless steel filter with multiple filter seals, primary seal, bell mouth exit plenum, anti-splash-back funnel with spiral drain groves, and 7.0 fluid oz. or 3.5 fluid oz. reservoir * Quick-turn, easy to service reservoir * Includes mounting bracket and custom made, emissions friendly, quick-connect lines—designed specifically for factory supercharged vehicles * CNC-machined aluminum bracket locks into position every 22.5 degrees—allows for different mounting options specific per the make and model vehicle to offset catch can from engine to clear larger engine covers, evap lines, etc. * Optional drain kit (sold separately) is available to allow for remote draining without removing the catch can—because engine bay fitment is tight on specific vehicles * Fast and flexible mounting bracket system for installation/removal and positioning—tool-free bracket nut can be removed without tools, or snug it down with 5/8 in. wrench * No sight glass needed—just push-up and twist a 1/8th turn to remove the reservoir and look inside, no more fumbling, or endless unscrewing to remove the reservoir * A powerful wave spring keeps the reservoir locked in place—included positive safety lock clip is also included just in case you want to be absolutely sure the reservoir cannot be removed
( 2 )
$299.00
—
$349.00
Replace the factory cast cover in your vehicle with the beauty of an ICT Billet LS timing cover. Able to fit with double roller timing chains, factory gaskets, and crank seal, each package includes a timing cover and bolts. Make your LS standout with aerospace-grade billet aluminum timing covers from ICT Billet. Note: Gaskets or crank seal are not included.
Not Yet Reviewed
$539.99
Making the weak stronger--fit your Ford 2-bolt main caps with Trick Flow® main stud race-version girdles. What makes them different from their other Ford main stud girdles? These girdles feature 1/2 in. thick tool steel construction, a black oxide finish, and studs--not bolts--for easier installation, even clamping forces, and reduced chance of main cap "walking". If you're racing, tying together your Ford factory 2-bolt main caps with main stud race girdles from Trick Flow® is a move towards strong winning performance!
( 5 )
$256.99
Howards Cams OE-style performance hydraulic roller lifters are stock replacements for use in factory hydraulic roller blocks. These lifters offer the best combination for the street with reduced friction and increased torque and horsepower. They're available in various outside diameters for fitment on specific vehicle applications. Order them individually or as a set.
( 6 )
$309.99
—
$447.99
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$603.95
$258.95
—
$448.95
Milodon oil pans are stock replacements for factory oil pans and are perfect for your restoration projects. They're also ideal for engines that are not intended for racing and just need a new stock-style pan. These American-made pans offer an excellent fit and flat, un-warped pan rails, unlike imported pans. They feature internal baffling to keep oil in the sump and free up additional horsepower and are available for most domestic V8 engines.
( 187 )
$349.95
—
$389.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
