Availability
Showing In Stock Items. Show All 15 Items.
Ford Performance Parts 5.0L/5.2L aluminum valve covers allow much greater dissipation and protection from exhaust manifold heat, thanks to the included foil tape along the cylinder head mating surface. This pair of cam covers retain factory coil cover provisions and the oil separator drain-back port that can be used with air/oil separator kits. Ford Performance Parts 5.0L/5.2L aluminum cam covers fit 2011-17 5.0L and 2015-19 5.2L engines. Features, items, and notes: * Can be powdercoated to customize your vehicle * 1 pair of camshaft (valve) covers * Camshaft cover gaskets * VCT solenoid grommets * Fasteners * Engine oil cap * F-150 engines will require the Coyote cam cover ball stud kit (M-6067B-F150) to install coil covers
( 20 )
$315.99
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 143 )
$699.95
$252.95
—
$454.95
On Sale
Holley Muscle Series valve covers are a blast from the past inspired by 1970s-era GM factory L82/LT1/Z28-equipped engines. They fill your desire with the iconic finned design and retro styling cues. You can choose from four finishes to best match your small block. Order the pair recommended for your year/make and engine application. Product features include: * Cast aluminum construction and fin design create strength and rigidity to offer years of leak-free performance * Standard height * Twist-in oil fill knockout (cap included) on one cover * Recessed area to place the included adhesive-backed Holley emblem or any round emblem of your choice on the other cover * Pre-installed internal oil baffles on both covers * PCV grommets
( 33 )
$381.95
—
$449.95
$343.75
—
$403.95
Trick Flow® cast aluminum valve covers not only look great, but they also eliminate the distortion, cracking, and oil leaking issues of the factory plastic valve covers. And that’s not all. There’s also a baffled PCV valve connector plus baffled and threaded fresh air connections for supercharged and turbocharged engines. The valve cover kits fit all Ford 4.6L/5.4L 2V engines with left- or right-side oil fill. Includes valve covers, OE-style gaskets, bolts, bolt seals, and two filler caps.
( 3 )
$256.99
On Sale
Holley's 2-piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies, and a Ford style overcover that hides the unsightly LS coils and messy wiring harness. This allows the full performance benefits of coil-on-cover ignition setups without the robotic styling. These coil covers also feature cast-in provisions for the spark plug boots and coil wiring harness, so no extensions or custom wiring is required. Each 2-piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, plus dress-up hardware and rubber grommets for the coil covers. The modular LS valve covers are available in three custom finishes: natural cast, polished, and satin black. Features: * Cast aluminum 2-piece LS valve covers designed to mount and hide both Gen I and Gen V style LS coil bodies * Retain the performance of factory coil-on-cover ignition without the unsightly styling * Coil cover features vintage Ford valve cover styling and cast-in wiring provisions * Base fits LS1, LS2, LS3, LS6 and LS7 engines with clearance for .750 in. lift cam with stock-style rocker arms * Base features internally baffled ventilation system * No coil relocation, wire harness extensions, or custom spark plug wires required * Includes low-profile billet oil fill cap * Includes all necessary coil mounting provisions and dress-up hardware
Not Yet Reviewed
$499.95
$448.95
Roto-Fab plenum covers are a direct replacement for your factory plenum cover. Their carbon fiber hydragraphics finish will customize your engine compartment. They install right over the top of your stock intake manifold, filling space between the two engine covers with a fiberglass plenum cover. These covers look great with any of Roto-Fab's finished engine covers. They are for the center section only. Install time is less than 10 minutes. Their plenum cover is about 1 in. thick, sits right on top of your stock setup, and mounts securely using the four existing studs.
Not Yet Reviewed
$274.95
Rein Automotive valve cover kits are designed and manufactured to be direct replacements for OE units. They contain common failure items, including breather hoses, oil caps, and hardware that need to be changed when the valve cover is replaced. Rein valve covers have identical dimensions as the factory originals—and are manufactured to strict engineering standards, using high-quality materials to prevent leaks and warping. A premium gasket is included with each engine valve cover kit. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$252.99
—
$325.99
Rein valve covers are designed and manufactured to be direct replacements for OE units. They have identical dimensions as factory originals—and are manufactured to strict engineering standards, using high quality materials to prevent leaks and warping. The engine valve covers are supplied with a premium gasket to prevent leaks, as well as hardware for easy installation. Most models are supplied with an integrated breather valve. Order the cover recommended for your vehicle and engine application.
( 1 )
$262.99
—
$280.99
aFe carbon fiber engine covers are sure to put some style under the hood of your BMW M5 to set your ride apart from the rest! They feature 2 x 2 twill weave carbon fiber and are finished with a high gloss clearcoat, while the underside has been smoothed to insure a high-quality all-around finish. Your stock "M" emblem and rubber grommets are easily removed from the factory cover and can be reinstalled onto these aFe carbon fiber engine covers.
Not Yet Reviewed
$475.00
On Sale
Dinan BMW engine covers adds aesthetic charm to your humble engine bay. The massive, detail laden, UV coated 2 x 2 carbon fiber lid inhabits the same footprint as its factory counterpart but flairs outward at its sides to inhibit the view of some of the unsightly stainless steel hardware underneath. With the goal of having the engine bay as clutter free as possible, Dinan engine covers are devoid of distracting mounting hardware. Instead, powerful rare earth magnets are utilized, resulting in not only an incredibly clean installation, but also one that takes no time or effort to mount. As a bonus, already straightforward filter changes are made even easier and expeditiously. Give your underhood visuals an upgrade with the bold statement of Dinan carbon fiber engine covers.
Not Yet Reviewed
$549.95
$302.95
What's a high performance Ford without a set of Ford Performance Parts aluminum valve covers? Take your pick from cast aluminum covers with smooth, finned, and pentroof designs in a variety of polished, satin black, and powdercoated finishes. The valve covers are available in a variety of styles with an impressive array of Ford, Cobra, and Mustang logos that are sure to add an individual touch to your Ford. Features include: * Available for a wide variety of Ford engines * Baffled * May require modifications for roller rockers * Some applications will clear stud girdles and roller rocker arms * Where applicable, include oil fill cap and grommets * 1.200 in. round oil fill/PCV holes on some applications * Most are 50-state legal when installed with appropriate closed PCV hardware
( 138 )
$351.99
—
$483.99
Finish off your engine with these quality Edelbrock Classic cast aluminum valve covers. The covers are made from heavy-gauge, sand cast aluminum with a polished, black, or EnduraShine finish and have a timeless ridged design. No Edelbrock part would be complete without the vintage logo topping it off. It's no wonder that these covers have been popular since the late '50s.
( 49 )
$379.95
Edelbrock Racing diecast aluminum valve covers are perfect for high performance street or all-out race engines. They are lightweight, high-strength, diecast aluminum and provide ample clearance for all popular valvetrains on most cylinder heads. Some versions are available with logos and multiple finishes.
( 32 )
$346.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
