Availability
Showing In Stock Items. Show All 243 Items.
Lares engineers their new (not remanufactured) power steering control valves to meet or exceed OE specifications. Each unit is hydraulically tested, and the ball joints are lubricated with high-quality grease to ensure original fit and performance. These replacements are available for a wide range of vehicles from the 1950s, '60s, '70s, and '80s. Order the model recommended for your application.
( 26 )
$251.99
—
$516.99
RideTech RidePro air valve assemblies feature a red anodized aluminum body with separate air valves mounted on top with attaching air lines. They are available in either 2-way or 4-way configurations, so you can choose which air valve is the best choice for your specific application. Control air flow to just two or all four air springs with one of these RideTech RidePro air valve assemblies.
( 1 )
$315.00
—
$495.00
Lares takes care to clean their remanufactured power steering control valves thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent seals and O-rings; then they're tested to ensure proper performance. Lares also lubricates and applies a fresh coat of high-quality paint to the valves, so all you have to do is install them and go! Verify the fitment and order the Lares remanufactured power steering control valves designed for your application.
( 17 )
$257.99
—
$274.99
CA offers power steering control valves for a variety of applications, including numerous Chevy Corvette models from the 1960s, '70s, and '80s. These units precisely regulate the flow of hydraulic fluid to the steering cylinder, essentially directing the fluid to the correct side depending on the direction of the steering wheel turn. This allows for assisted steering by the vehicle's power steering system. The replacement valves are manufactured from factory materials and specifications to ensure proper fitment and long-lasting performance. They meet or exceed OE quality standards.
Not Yet Reviewed
$273.99
Arnott new air suspension solenoid valves are a direct replacement for failing OE valves. An air suspension solenoid valve distributes air from the compressor to your air springs and air struts. Over time the valve O-rings can dry rot and leak air, causing your compressor to overwork or allow moisture to degrade the electrical solenoid's components. Arnott aftermarket solenoid valves are made from the highest quality materials and designed to meet or exceed the original equipment specifications. Order the model recommended for your vehicle application.
Not Yet Reviewed
$323.99
To everything, turn, turn, turn ... if your power steering is no longer turning smoothly and easily, Scott Drake has control valves to return your steering control to minimum force for operation, the way it should be. These control valves are built from all-new components to ensure you years of continued driving pleasure. Your power steering will feel even tighter than the original, as these new valves will transfer the correct amount of fluid for even road feel and easy turning. Order the model recommended for your vehicle.
( 6 )
$415.95
Cunningham Machine billet blow-by tubes offer a lightweight, quick-disconnect approach to crankcase pressure evacuation on boosted engine combinations. They are 100 percent CNC-machined from 6061 aluminum in a symmetrical design that allows you to face the tubes in either direction. Available in a machined or black anodized finish, choose the Cunningham blow-by tube with the end size needed. Tube end options: * -12 AN, -16 AN, 1.25 in. slip, or 1.50 in. slip Note: Racing use only, not legal for highway use
Not Yet Reviewed
$274.99
—
$291.99
AccuAir Suspension knows the importance of a high-quality valve manifold and that is why they have developed the VU4 valve manifolds for your air suspension systems. These VU4 valve manifolds are a 4-corner manifold, meaning that it is designed to inflate and deflate four individual air springs. The VU4 manifolds are outfitted with 1/4 in. NPT fittings on all ports for easy installation of your air suspension system plumbing. To add to the already high-quality construction, each of these valve manifolds will feature all stainless steel valve components. The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles. These manifolds also help to provide the cleanest installation possible while delivering the most reliable operation on the market today.
Not Yet Reviewed
$549.95
QA1 MOD Series valve packs provide options for valving your MOD shocks. The shocks come standard with medium compression and rebound, but thanks to these innovative valve packs with QuickTune technology, you can quickly and easily swap out the medium valve packs for soft or firm modules. No more swapping shocks from track to track or spending a lot of money and time for a specialist to re-valve your shocks. With a variety of QA1 MOD Series valve packs you only need one set of MOD shocks. QA1 offers pairs or soft or firm, rebound or compression valve packs, as well as a complete kit with two of each. Your race car will be ready for any track conditions with MOD valve packs from QA1.
Not Yet Reviewed
$269.95
An air suspension solenoid valve block is responsible for distributing air from the compressor to your air struts or air springs. Over time the valve block O-rings can dry rot and leak air, causing your compressor to overwork or allow moisture to degrade the electrical solenoid components. Arnott air suspension solenoid valve blocks are direct OE replacements for your vehicle's failing valve block. Made from the highest quality materials, like fatigue-resistant plastic for dimensional stability and less pressure escape, each block will efficiently distribute pressurized air restoring optimal operation. They are also color coded for fast installation. Choose the one designed for your vehicle.
Not Yet Reviewed
$386.23
AFCO Racing Eliminator BNC valving shocks are designed to eliminate bounce after a grueling launch off the line. Their smooth ultra-low friction rod guide and lightweight aluminum construction help dissipate heat. There are 32 clicks of adjustment afforded to rebound settings through a shaft-mounted knob, and to compression via a body-mounted knob. For better impact absorption after a wheel stand, install AFCO Racing Eliminator BNC valving shocks. Select the model suited to fit your racing application needs.
( 1 )
$465.99
—
$514.99
Bilstein SNS2 Series base valve shock absorbers are designed for applications requiring steel body shocks. These shock absorbers feature optimized shock lengths, and a modular monotube design that enables the flexibility to revalve and rebuild as needed, with extra tuning options through base valve technology. End caps are available in steel (SNS2 Series) or aluminum (SN2 Series) to meet various sanctioning body requirements. Choose the model designed for your application needs. Features and benefits: * All-smooth steel body construction with internal bore, base valve assembly and premium PTFE Heims * Monotube design provides maximum heat dissipation * Extruded modular steel body maintains tighter tolerances for superior performance * Bilstein's fill tool allows plug installation for sanctioning body requirements that restrict Schrader valves (fill tool sold separately) * Body design allows for standard or coilover applications (coilover kit sold separately) * Hard chromed shaft reduces seal drag * Pistons and piston band sold separately
Not Yet Reviewed
$362.00
—
$449.00
Featuring a completely new design, Belltech Nitro Drop 2 shock kits bring a high performance blend of internal valve technology and state-of-the-art construction to your vehicle. They feature a cavitation-free valve assembly that prevents air from decreasing the shocks' effectiveness. The kits include dust boots and have OEM-style rubber bushings to offer a smooth, comfortable ride. Order the shocks recommended for your vehicle application.
( 47 )
$260.00
Want to improve the performance of your ride, without a major hassle? QA1 Stocker Star shocks could be your answer. They're lightweight, fully adjustable, and bolt right in. They rely on deflective-disc valving and have 18 levels of damping, which you can select at the twist of a knob—with the shocks in place on the vehicle. Stocker Stars have 5/8 in. hard-chromed centerless-ground piston rods, double-lip wiper seals, and one-piece, forged, machined-aluminum bodies that are bright-anodized for great looks and durability. Each shock is dyno-tested for consistency and comes with chrome or zinc plated mounting hardware. Order the model recommended for your vehicle application.
( 343 )
$268.00
—
$314.95
Fox Racing Shox 2.0 Factory Race Series air shocks' design allows for infinite adjustability of the spring rate by varying the nitrogen charge pressure. They're incredibly strong yet lightweight; their hollow shafts further reduce weight, making them ideal for competition rock crawlers. The shocks are available in a variety of extended and collapsed length options. Additional product details: * Smooth bore and honed seamless steel body * Zinc plated and double clearcoated for a long-lasting finish * Black anodized, CNC-machined 6061-T6 billet aluminum components * Tunable valving, velocity sensitive deburred valve shims * Redundant sealing pack system, main seal, wiper seal, scraper seal * JM92 advanced suspension fluid for improved performance at variable temperatures * Hard chromed 4130 steel, 1 1/4 in. diameter shaft * Spherical, PTFE-lined heat-treated alloy steel bearings * 1 1/2 in. mounting width spacers * 500 lbs. max load
( 2 )
$474.95
Bilstein M 7100 Series shocks are designed for racing and specialty high performance applications. They feature a self-adjusting, deflective disc valving system with multiple valvings available. The shocks are available in a wide variety of extended and collapsed lengths; upper and lower mount options; body diameters; and more. Order the model best suited for your vehicle application. Additional features: * Schrader valve shocks use dividing piston * Independent rebound and compression tuning * High-flow piston reduces harshness * 1/2 in. Heim ends * Easily rebuildable * True high-pressure gas shocks, no emulsion * 14mm centerless-ground, case-hardened, chromed, and super-polished rods * Aluminum one-piece rod guide
( 11 )
$267.00
—
$349.00
QA1's rebuildable 6Q twin-tube shocks offer the performance, consistency and tunability racers demand. Formerly known as 60 and 62 Series shocks, the 6Q series is an aluminum large-body shock. The threaded body makes it very easy to use in coil-over configurations with QA1 kits (sold separately). Racers can choose from 6 in., 7 in., 8 in., and 9 in. bearing mount shocks depending on rules and applications. The shocks are also available with rebound adjustability to easily dial-in valving at the track. Small details add up to provide great overall performance. The scalloped base loop increases clearances in tight areas like upper control arms and shock mounts. Pistons are made of high-quality raw aluminum to maximize consistency. You can valve the shock with bleed shims or drill out bleeds to maximize tunability. Order the QA1 6Q Series twin-tube shock model for your application needs. Features: * Applications: Late Models, Asphalt Modifieds, Sprint Cars * 6Q shocks can be re-valved and rebuilt by racers in a matter of minutes using basic tools * The gland features relief cuts and a hyper screw port, making shocks easy to fill and bleed on assembly * An upgraded seal kit minimizes leaks—especially in high-rebound applications * The compression tube uses a slip fit design to simplify the rebuild process * Laser-engraved, black-anodized closure nuts make serial numbers and valving easy to read at the track or in the shop * Racers can rebuild and re-valve their own shocks using available kits (sold separately) * Coilover compatible
Not Yet Reviewed
$319.95
The Belltech Street Performance OEM shock lineup has been engineered to provide a premium ride quality for today's trucks and SUVs. Company engineers focused their attention on tuning the low speed compression characteristics of these shock absorbers, which is responsible for controlling your sport truck or SUV's pitch and roll, dive and squat—to help keep you confident and in control. The "progressive" rebound tuning will complement large aftermarket wheels, keeping the ride smooth but firm and in control. Order the Street Performance OEM replacement shocks recommended for your vehicle. Additional features include: * Clear coat added over the powdercoated finish * Hardened chrome 15mm piston rod * Reinforced OEM-quality outer rubber bushings * Progressive-rate, polymer bump stop and triple-lip NBR rod seal (application dependent) * PTFE-coated piston and tuned, high-durometer, vulcanized rubber guide bushing to help reduce noise, vibration, and harshness (NVH) * Large 35mm piston and valves allow greater hydraulic control during quick wheel movements and long shock travel * Steel dust cover adds protection for the piston rod, sealing system, and does not deteriorate from UV exposure or chemicals * Large body diameters (50mm to 55mm) and twin tube design allow for larger oil volume and better heat dissipation, leading to increased shock life * Low-friction sealing and guide system creates a quick-reacting damper that is sensitive to the smallest of motions, with little to no temperature increase during extreme damper conditions
( 6 )
$319.80
—
$457.90
Belltech Trail Performance Plus lift shocks are designed to provide a premium ride quality for modern trucks and SUVs. Engineers focused their attention on tuning the low-speed compression characteristics of this shock absorber, which is responsible for controlling your vehicle's pitch and roll, dive, and squat to help keep you confident and in control. The 'progressive' rebound tuning will complement large, aggressive off-road tires, keeping the ride smooth but firm and in control. Other features include: * Independent adjustable damping forces * Independent performance-tuned 35mm compression and rebound valves * Rebound force - 18 clicks of adjustment * Compression force - 12 clicks of adjustment * Sturdy 8mm piston rods and oversized galvanized or stainless steel shock bodies * Progressive-rate polymer bump stops
Not Yet Reviewed
$495.00
Specifically designed for non-coilover applications, AFCO Racing 11T Series smooth body shocks will ensure you have the traction needed, all the way around the race track. They feature a twin-tube, non-adjustable design with built-in shim stack technology to deliver consistent, repeatable results on any given racing surface. The large 5/8 in. diameter shaft provides added strength, and the aluminum anodized body protects all of the internals. AFCO Racing 11T Series smooth body shocks are available in different stroke lengths, as well as with rebound and compression valving.
Not Yet Reviewed
$274.99
Belltech Street Performance twin-tube shocks set the standard in performance handling for sport trucks. Their low-speed compression characteristics help to control pitch and roll, while their progressive rebound tuning allows you to use large aftermarket wheels and still have a smooth, firm ride. Get the performance and quality that you're looking for when you order the Belltech Street Performance shock models designed for your application. Other features may include (application dependent): * Oversized galvanized steel shock bodies with steel dust covers * Sturdy 35mm valves and 15mm or 18mm piston rods * Available vehicle-specific or adjustable damping tunes * Progressive-rate polymer bump stops
( 504 )
$495.00
QA1's rebuildable 5Q twin-tube shocks offer the performance, consistency and tunability racers demand. Formerly known as 51 and 53 Series shocks, the 5Q series is a large body steel shock available in both bearing mount and stock mount configurations. Choose from 7 in. and 9 in. bearing mount bodies or various stock mounted lengths depending on rules and applications. Shocks are also available with rebound adjustable piston rods to adjust valving at the track. Small details add up to provide great overall performance. The black zinc coating ensures a very consistent finish, creating a tight seal every time. The scalloped base loop increases clearances in tight areas like upper control arms and shock mounts. Pistons are made of high-quality raw aluminum, minimizing variations that can be found in anodized parts. You can valve the shock with bleed shims or drill out bleeds to maximize tunability. Order the 5Q Series twin-tube shock model for your application needs. Features: * Applications: Street Stock, Hobby Stock, B-Mod/Sport Mod, Modified * 5Q shocks can be re-valved and rebuilt by racers in a matter of minutes using basic tools * Two-piece bodies make it simple to disassemble and reassemble shocks * The gland features relief cuts and a hyper screw port, making shocks easy to fill and bleed on assembly. * An upgraded seal kit minimizes leaks—especially in high-rebound applications * The compression tube uses a slip fit design to simplify the rebuild process * 5Q shocks utilize a laser-engraved, black-anodized closure nut to make serial numbers and valving easy to read at the track or in the shop * Coilover compatible Note: QA1's steel body shocks can be used in coil-over configurations using the appropriate kits (sold separately). Racers can rebuild and re-valve their own shocks using available tuning and rebuild kits.
Not Yet Reviewed
$319.95
Do you need an all-in-one air source kit for your off-road 4x4 or other project vehicle? If so, then these VIAIR Air Source kits are just what you need. These air source kits feature your choice of air compressor and air tank size and psi rating. All components within these air source kits are factory installed and are ready for immediate use. These VIAIR Air Source kits are sure to meet all of your vehicle's pneumatic needs.
( 10 )
$349.95
—
$371.25
Rancho Level It systems create a better stance for your vehicle. Each kit contains different quality Rancho components (depending on your application) that provide an inexpensive, fast, and easy way to level your vehicle. Level It systems feature Rancho's high performance shocks or great-looking monotube high-pressure struts. Choose the model designed for your vehicle.
( 3 )
$329.99
—
$524.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
