Availability
Showing In Stock Items. Show All 13 Items.
UMI Performance torque arm relocation kits are designed to remove the front mounting point of the torque arm off of the transmission and protect the tailshaft from damage. General Motors' tailshaft mounted design works great for a stock-driven vehicle; however, it is not designed to take abuse and hard launches. UMI Performance torque arm relocation kits replace your transmission crossmember with a new, stronger setup with a built-in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock-style aftermarket torque arm, as well as with the factory torque arm. These units are built using rectangular mild steel tubing and 0.188 in. mild steel mounting plates and they include all hardware needed for installation. The torque arm mount is machined from 0.250 in. thick mild steel and features a new clamshell for appropriately attaching the torque arm to the new crossmember.
( 39 )
$269.99
Alston Racing bolt-on subframe connectors are carefully formed to fit the contour of your vehicle's stock unit body floor. No cutting or welding is required for installation, allowing you to retain your stock exhaust, fuel, and brake lines. In about four hours, you can preserve the consistency and performance of your uni-body chassis. Additional features of Alston Racing bolt-on subframe connectors include: * Easy installation * Complete with Grade 8 hardware and instructions * Powdercoated to ensure long life and good looks * Can also be welded in
( 24 )
$297.00
—
$356.00
Transmission crossmembers get the power under your vehicle's hood to the tires on the ground. Correctly locating and supporting your transmission can help make that happen, as well as achieving the proper driveline angles to avoid possible issues in your drivetrain. Bowler Performance provides several crossmember designs to fit a variety of engines and Tremec transmission combinations (some will work with any transmission, including automatic units). Bowler crossmembers are easy to install, offer strong steel construction, a durable black powdercoating, and most include hardware. They are designed to allow the use of stock height or half-height body bushings and the use of dual exhaust. Choose the crossmember designed for your vehicle/engine/transmission setup.
Not Yet Reviewed
$379.99
—
$463.99
Belltech crossmembers are designed to exceed OEM load specifications and are direct replacements for the factory units. A gain of 2.25 in. of clearance is achieved. Belltech low-profile design crossmembers reduce the risk of bottoming on extremely lowered trucks.
( 3 )
$259.00
—
$289.00
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$473.95
$259.95
—
$476.95
On Sale
Steeda Ford Mustang rear chassis X-braces reduce deflection and improve your suspension performance. They're crafted in-house from strong chromoly alloy steel tubing, then further reinforced with a billet aluminum center cover plate. The X-braces are powdercoated to resist the elements and provide long-lasting rigidity to your undercarriage. These units distribute loads more efficiently between your rear shocks, springs and the chassis—providing increased handling and cornering, while curbing rattles and squeaks. Most—but not all—models require a rear seat delete, and you can secure the braces easily with either a bolt-on or welded installation. Order the Steeda rear chassis X-brace designed for fitment on your Ford Mustang submodel.
( 4 )
$284.95
—
$354.95
$256.99
—
$331.99
UMI Performance transmission mounted torque arms eliminate unwanted traction problems and transfer your power to the wheels. UMI Performance transmission mounted torque arms bolt on directly in place of the factory unit using existing mounting holes and require no drilling or welding. These torque arms are designed to eliminate wheel hop under hard acceleration and reduce 60 ft. times instantly. UMI Performance transmission mounted torque arms are supplied with a low-deflection front bushing designed to replace the stock rubber bushing and bolt in the existing clamshell. The rear torque arm mount is constructed entirely of 0.375 in. thick, CNC-machined mild steel and is fully MIG-welded. These torque arms feature on-car adjustability for easy pinion angle adjustments using a 4140 heat-treated adjuster and 3/4 in. rod ends. Additional features include: * Constructed from 1.250 in. x 0.120 in. DOM seamless steel tubing * TIG-welded 4140 chromoly tube adapters * On-car adjuster built using 4140 chromoly steel and heat-treated for maximum strength * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Rear mounting plates use 0.375 in. thick mild steel and are designed to fit stock as well as 12-bolt and 9 in. rear-end housings * Rear mounts feature solid 3/4 in. rod ends and are attached using Grade 8 hardware * Durable powdercoated finish
( 19 )
$329.99
Rust Buster offers driveshaft crossmembers for a variety of applications, including select Chevrolet and GMC trucks from 2001 and up. Silverados and Sierras are heavy-duty pickups known for their all-around capabilities. These vehicles earned a reputation as reliable workhorses, equally at home on construction sites and farms. However, their versatility extends beyond work duties. Due to their comfort and reliability, the trucks became a popular choice among RV enthusiasts, particularly for towing large 5th wheel trailers. It's not uncommon to spot them traversing the United States, from the green mountains of Vermont to the rugged landscapes of Wyoming. Their Duramax engines and towing capacity made them well-suited for long-distance travel and challenging terrain. These replacement crossmembers are made from heavy-duty 11-gauge steel, built to OE specifications. By utilizing the latest in scanner solutions and CAD software, the Rust Busters engineering team is able to capture your specific model truck's frame contours down to the smallest detail. Fitment, ease of installation, and OE compatibility are top priorities. Additional notes: * Fits all cab and bed configurations * Includes mounting bracket for diesel fuel cooler, if equipped * Side plates sent loose for ease of installation * Welding required * Ships with an oil protective coating to prevent oxidation during transit
Not Yet Reviewed
$299.99
On Sale
Artec Industries' new JK heavy-duty crossmembers are designed to give your Jeep Wrangler JK better protection beneath the vehicle than the stock unit. Designed using CAD files directly from the manufacturer, these heavy-duty reinforcements ensure that you have a great fit with factory components. Made from CNC-cut and formed 1/4 in. thick steel, the JK heavy-duty crossmembers will hold up to plenty of off-road abuse. They enable you to mount longer arms for greater stability and flex. All nuts are pressed into the brackets for easy removal and installation; the crossmembers use 2.625 in. wide joints or bushings with 9/16 in. holes; they're shipped bare so you can custom finish it however you want. Order the model recommended for your Jeep application.
Not Yet Reviewed
$571.99
$428.99
Chassis Engineering transmission crossmembers are offered for a variety of applications. Whether you choose their bolt-in or weld-in styles, their selection of universal units will fit most standard or automatic transmissions, and they come available with five separate drops. Plus, they can be cut to the width you need to fit your frame. Chassis Engineering also offers a collection of car and transmission-specific crossmembers that will save you fabrication time. All are made from strong steel to provide the support that you need for your restoration project.
( 6 )
$340.00
UMI Performance transmission crossmembers are designed for late model F-bodies. These crossmembers are built using 0.120 in. rectangular tubing, 0.188 in. mild steel mounting plates, and a 0.375 in. thick transmission mount. These crossmembers are powdercoated bright red or gloss black and include new mounting hardware.
( 5 )
$349.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
