Availability
Showing In Stock Items. Show All 20 Items.
Steer Smarts Yeti XD top mount drag links for a high-steer or drilled-out OE knuckle was designed to be a complete bolt-on for Jeep JKs that have already been modified for a flipped draglink. They install in just minutes and bolt to a sleeved factory knuckle or high-steer knuckle hole and the factory pitman arm hole. Features: * Yeti XD assembly: -- Easy bolt-on installation -- Engineered for proper clearance with chassis components, eliminating interferences * Ball joints: -- 30mm 2 1/2-ton ball joints designed specifically for Jeep JKs -- Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Drag link ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long term serviceability -- Forged from medium carbon high-hardened steel and heat-treated for even greater buckling, impact, and fatigue strength. -- Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Adjuster tube: -- Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength -- Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Internal threads and tube are also e-coated for long term serviceability
Not Yet Reviewed
$475.00
Steer Smarts offers Yeti XD track bars for a variety of applications. They're fully adjustable on the vehicle and are designed to be the strongest track bar available. Available for front or rear, in black or red. Additional details: * Easy bolt-on installation * Works on stock height (no lift) up to a 6.5 in. lift * E-coated and powdercoated for a long-lasting appearance under harsh conditions * Engineered for proper clearance to other chassis components to eliminate interferences * Forged from 2 in. steel for greater buckling, impact, and fatigue strength * Designed to correct track bar geometry * Includes all necessary installation hardware
Not Yet Reviewed
$325.00
—
$399.00
The YETI XD Series is Steer Smarts' most extreme steering linkage for your Jeep equipped with a Dana UD60 (68.5 in. wide). It's the strongest, most durable linkage ever engineered for the Wrangler and Gladiator. These complete bolt-on bottom-mount drag links install in just minutes—and bolt to the factory tapered knuckle hole and the factory pitman arm hole. Additional details: YETI XD DRAG LINK ASSEMBLY: * Engineered for proper clearance to other chassis components to eliminate interferences. BALL JOINTS: * 30mm 1-1/2 ton ball joints are designed specifically for the JL with a UD60 or PR60 (68.5 in. wide) * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel on steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life. These superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves ball joint reliability over the competition * Fully greaseable DRAGLINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high harden-ability steel and heat-treated for greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology prevents linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBE: * Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long term serviceability * Drag link fits all left-hand drive JL Wrangler models 2018+, including Rubicon and Unlimited equipped with a UD60 or PR60 (68.5 in. wide)
Not Yet Reviewed
$485.00
Steer Smarts Yeti HD 26 Series outer drag linkage was engineered from the ground up with extreme detail to every component. The Yeti HD 26 with the Griffin attenuator is a direct bolt-on for your lifted Jeep JK. These top-mounted drag link end and attenuator combos will help realign the steering geometry of Jeep JKs with more than a 3.5 in. lift and will reduce the harsh road feedback inherent in the stock JK steering system. The kits feature Steer Smarts' patent pending reverse taper mount for ease of installation—and require no modifications to the stock knuckle and bolts to the factory tapered knuckle and factory upper drag link end. Additional features: -- OUTER DRAG LINK ASSEMBLY: * Easy bolt-on installation * E-coated for a long-lasting appearance under harsh conditions * Engineered for proper clearance to other chassis components to eliminate interferences * Patent pending "No Drill" reverse taper mount makes for a quick and easy installation without the need of drilling or altering your knuckle * External threads are E-coated for durability and long-term serviceability * Forged from 15v41 medium carbon high harden-ability steel and heat-treated for greater buckling, impact, and fatigue strength -- BALL JOINT: * 26mm ball joint * Cold headed medium carbon alloy steel ball studs provide incredible impact toughness * Ball studs are also induction heat-treated, greatly improving their ultimate and fatigue strength, as well as wear resistance for superior off-road durability * Steel bearings are also used for exceptional ball joint wear resistance and robustness * High-quality OE-style seal that ensures longer ball joint life * Ball joint is greaseable for greater reliability -- GRIFFIN HD: * Reduces harsh and negative feedback to your steering wheel * Easy bolt-on installation * Designed for the proper clearance to other chassis components to eliminate interferences * E-coated for long-lasting appearance under harsh conditions NOTES: * Outer drag link end fits all left-hand drive JK Wrangler models 2007 to 2017, including Rubicon and Unlimited * A minimum lift height of 3-3.5 in. (and correct bump stop) is required for a top-mount drag link. Minimum height requirements will vary by lift manufacturer. Part number 79017001 (Track Bar Relocation Bracket) is necessary when flipping your drag link to maintain proper parallel geometry track bar and drag link.
Not Yet Reviewed
$389.00
Replace your heavy stock K-member with one of these tubular QA1 Mustang K-members and, in addition to the weight savings, you'll get better steering geometry, less bump steer, reduced dive under braking, and quicker straight-line performance. Ideal for street performance, autocross, pro touring or drag racing, they easily bolt onto factory components without any wheel or tire fitment changes. Features and benefits include: * All mounting points are digitally-indexed from new factory K-members * Made from high-quality, American-made, high-strength, low-alloy steel (HSLA) steel * Weighs only 25 lbs.--over 50 percent lighter than stock K-members * Increased header and oil pan clearance for easier maintenance and installation * Modular design for versatility--bolt-in engine mounts can easily be swapped for future engine changes * Improved geometry--maintains optimum anti-dive and minimizes bump steer with selectable rack height and optimal control arm positioning * Ideal for Mustangs with a lowered stance * Retain the factory wheel base Note: For best results, QA1 control arms are strongly recommended
( 31 )
$479.95
Get up to 3 in. higher than the rest of the world with one of our Summit Racing™ 7800000 Series body lift kits. The kits raise your truck's body off of its frame with reinforced nylon lift blocks (rated at 50,000 lbs. per square inch), and include such components as CNC-machined splined steering extensions (where required), bumper brackets (most applications), and zinc plated Grade 5 hardware to complete the installation.
( 50 )
$270.99
—
$446.99
OER Authorized bolt-in IFS conversion kits are available for 1947-54 GM pickups with a V8 engine. The kits will improve your vehicle's ride, handling, and performance. These steel crossmember kits convert your antiquated stock front suspension and steering box to a more modern 1974-78 Mustang II or 1974-80 Pinto/Bobcat setup. Enjoy better handling with the addition of rack and pinion steering and twice the suspension travel when compared to stock. Combine this advancement in steering and suspension with the added benefit of modern braking power, and this setup becomes a no-brainer. The bolt-in kit is designed for use on 1947-54 Chevy 1/2 ton or light-duty 3/4 ton frames, and will drop the ride height approximately 2 1/2 to 3 in. using stock Mustang II front spindles. Lower control arm pivot tubes and gussets are not included in this kit. (A weld-in crossmember it is also available, if preferred.) Specs: * Bolt-in components. No welding required * Proven Mustang II geometry * Can use stock 1974-78 Mustang II or 1974-80 Pinto suspension components, except control arms. * Requires tubular control arms (strut-less style lowers) * Interlocking bolt-in boxing plates reinforce frame for strength * Requires power steering rack * Stock spindles will drop ride height 2-1/2" - 3 inches * Will work with small block or big block Chevy engines * Not for use with air-ride front ends Note: Additional items may be needed to complete installation, including but not limited to tubular control arms, spindles, coilover springs/shocks, rack and pinion steering, tie rods, calipers, rotors, inner tie-rod extensions. Important: Lower control arms need to be level with the ground (with all the weight on the vehicle) for correct steering geometry.
( 1 )
$379.99
Complete OE-style chassis fastener kits that contain most everything needed for your vehicle in one package. Summit Racing™ restoration chassis fastener kits aren't hardware store bolts. Each fastener is a reproduction of what was used at the factory, including size, finish and head markings. Each kit component list will vary per vehicle, but all kits provide the correct OEM-style replacements to secure a variety of components from control arms and shocks to steering linkage and transmission crossmember. Select the chassis fastener kit packaged for your vehicle.
Not Yet Reviewed
$474.99
—
$509.99
Mishimoto Mustang GT strut tower braces tie the front strut towers together to make for a more rigid chassis. The braces are made from 14-gauge steel tubing with CNC-machined steel end plates for maximum rigidity. They're designed to work with or without the stock performance package K-brace, but combining the stock K-brace with the strut tower brace proves to have the greatest increase on braking and cornering performance. If you're competing in stock autocross classes, Mustang GT strut tower braces will cause you no qualms, as they're legal for most of these classes. Key features: * Direct fit for the 2015–17 Mustang GT and EcoBoost * Ties front structure of the vehicle together for increased stiffness and rigidity during cornering and braking * Improves steering response * Included spacer works with non-performance package vehicles * Allows access to dipstick on GT models
Not Yet Reviewed
$262.95
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 25 )
$519.95
Lose some weight and gain some space with AJE Suspension Camaro/Firebird tubular K-members. With these mild steel or chromoly components, your F-body's front-end will receive K-member suspension technology to make your car that much better than stock. These K-members are available with or without engine mounts, are powdercoated for exceptional, lasting good looks, and they work with factory A-arms and springs with bolt-on perches. Remove some weight and add some strength to your third or fourth generation F-body with aftermarket Camaro/Firebird tubular K-members from AJE Suspension.
Not Yet Reviewed
$444.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
