Availability
Why do you need Dorman fuel line repair kits? Because with these kits, you can repair broken ends, replace sections or entire line assemblies, and create custom supply and return lines a lot easier. Dorman kits are offered for both steel fuel line and nylon fuel line repairs. You'll save time and money with Dorman fuel line repair kits.
( 19 )
$324.99
HEL Performance offers braided stainless steel fuel injector lines for a variety of applications—including many Audi, Merkur, Ford, Porsche, and Volvo vehicles from 1976 and up. Designed for multi-port injection, these replacement hose kits include stainless steel fittings. Order the model recommended for your ride.
Not Yet Reviewed
$305.56
On Sale
Holley universal, in-line fuel pumps are intended for fuel injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They're all rated for continuous duty service and have been tested up to 2,500 hours. The high-output versions are great for serious performance work. These pumps should be mounted below the fuel level of the tank for a good gravity feed on the inlet side. Features include: * OE-proven design * Lightweight and compact * Fits most EFI applications including turbo and supercharged * Not for use on aircraft of any type
( 41 )
$318.95
$287.05
Tanks Inc. universal fuel line kits include 25 ft. of line and all or most of the fittings that you need to plumb your fuel system when using a Tanks Inc. fuel pump. The kits will give you all the fittings needed to plumb a FI-Tech system and most fittings to plumb systems that use an external fuel regulator, such as MSD Atomic, Holley Terminator, or FAST EZ-EFI. Tanks Inc. universal fuel line kits include: * Fuel filter * Two quick-disconnect fittings for fuel filter * Two 1/4 in. NPT to -6 AN fuel pump adapter fittings * Six -6 AN straight Twist-Lok fittings * 25 ft. -6 AN black Twist-Lok fuel hose
( 19 )
$293.99
Fleece Performance auxiliary fuel filter and line kits include everything you need to properly route, plumb, and filter fuel for your Cummins. They will improve accessibility to the fuel filter, as well as reduce your ongoing maintenance cost with a lower cost Donaldson filter. Choose the kit designed for your Cummins engine. Kit includes: * Donaldson 3 micron fuel filter and water separator * Filter base with integral mounting * Distribution filter block/filter coupler * Push Lock hose and all necessary AN and barb fittings * CP3 Feed fittings for 5.9L and 6.7L (not included in all kits)
Not Yet Reviewed
$299.00
—
$349.00
Fleece Performance auxiliary heated fuel filter and line kits come with everything you need to properly route, plumb, and filter fuel for your diesel, including an integral high-flow fuel heating element and Water-In-Fuel (WIF) sensor. They will improve accessibility to the fuel filter, as well as reduce your ongoing maintenance cost with a lower cost Donaldson filter. Choose the kit designed for your Cummins engine. Kit includes: * Donaldson 3 micron fuel filter and water separator * Fuel filter base with integral heater and mounting hardware * Push Lock hose and all necessary AN and barb fittings * CP3 Feed fittings for 5.9L and 6.7L * Water-In-Fuel (WIF) sensor and adaptation harness
Not Yet Reviewed
$449.00
MagnaFuel ProTuner 625 Series inline fuel pumps feature quiet operation, which makes them ideal for street or performance use. They can support 1,500 hp and up, while offering continuous-duty use. Additional features include: * No pump shaft seals * CNC-machined, hard-anodized aircraft aluminum * High-torque custom motor with low current draw * Double support bearing * Can be mounted vertically or horizontally * Polymer wear plates for quiet, smooth operation * 12 amps at 45 psi * -8 AN inlet and outlet, fittings are sold separately
( 4 )
$464.99
Mishimoto R-Line intercoolers provide the perfect cooling capacity needed for supercharged and turbocharged vehicles. These front-mount units feature durable bar-and-plate cores that provide superior heat transfer and effectively reduce air intake temperatures. Mishimoto R-Line intercoolers are constructed of powdercoated 6061 aluminum and provide a fin pitch of 15 fins/in., along with massive 4 in. cores and 3 in. inlets/outlets to flow 1,250 cfm. Additional features: * Robust, one-piece cast aluminum end tanks withstand high-boost pressures * Universal mounting points * TIG-welded to perfection * Mishimoto Lifetime Warranty * Available in silver, black, or gold * Note: For your taste, only one side of the intercooler has the Mishimoto logo
( 6 )
$317.95
—
$398.95
Nitrous Outlet 860 Performance Hard-Lined LSX Steam Vent Kit utilizes the front and rear steam ports on the passenger and driver side head, allowing water flow through the ports and back to the radiator. This design prevents built up steam pressure which is known to create a rise in cylinder temperatures on number 7 & number 8 cylinders, causing pre-detonation.
Not Yet Reviewed
$255.99
Mishimoto G-Line intercoolers provide the perfect cooling capacity needed for smaller turbocharged engine applications. These sleek and stylish front-mount units feature durable bar-and-plate cores that provide superior heat transfer and effectively reduce air intake temperatures. All Mishimoto intercoolers are constructed of powdercoated 6061 aluminum and provide a fin pitch of 15 fins/in., along with 3 in. inlets and outlets to flow 1,250 cfm. Additional features: * Robust, one-piece cast aluminum end tanks withstand high-boost pressures * Four M8 x 1.25 threaded universal mounting points * Constructed with 6061 aluminum * TIG-welded to perfection * Mishimoto Lifetime Warranty * Available in silver or black * Note: For your taste, only one side of the intercooler has the Mishimoto logo
( 8 )
$295.95
—
$319.95
Mishimoto M-Line intercoolers provide the perfect cooling capacity needed for smaller turbocharged engine applications. These sleek and stylish front-mount units feature tube and fin cores, powdercoated 6061 aluminum construction, and provide a fin pitch of 15 fins/in., along with 3 in. inlets and outlets to flow 1,250 cfm. Additional features: * Robust, one-piece cast aluminum end tanks withstand high-boost pressures * Four universal mounting points * Constructed with 6061 aluminum * TIG-welded to perfection * Mishimoto Lifetime Warranty * Available in silver, black, or gold * Note: For your taste, only one side of the intercooler has the Mishimoto logo
( 1 )
$297.85
—
$330.95
On Sale
Earl's Performance Dominator in-line billet fuel pumps are for those of you who are in need of a fuel pump that can support serious horsepower. Have a nitrous system, turbo or supercharger? No problem! These fuel pumps feature a twin-pump design that allows you to use one pump for cruising and both pumps when you activate your nitrous switch or start building boost. The second pump allows you to eliminate the unnecessary recirculating and heating of fuel that can lead to poor performance and hot fuel issues. Earl's Performance Dominator in-line billet fuel pumps also have an added benefit for hard core enthusiasts that run events like the Hot Rod Power Tour or the Baja 1000; that extra pump brings you peace of mind that you'll always finish what you've started. Features include: * Billet aluminum construction for durability and good looks * -10 AN O-ring inlet/outlet for high flow and superior sealing * Suitable for use with carbureted or EFI applications * May be fully submerged in-tank for custom applications, space savings, and reduced plumbing * Compatible with 12 V to 18.5 V systems at pressures up to 80 psi for street or race use * For hardcore race use, both pumps can be wired for full-time duty * Only 7.66 in. long x 5 in. wide x 2.5 in. tall for easy installation on frame rails or other tight areas * Patent pending dual-pump technology * Proven durability beyond 3,000 hours * Weighs only 5.1 lbs.--half a pound less than competitive 1000+ hp pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$626.95
—
$699.95
$344.95
—
$384.95
Mishimoto S-Line intercoolers provide the perfect cooling capacity needed for turbocharged and supercharged engine applications. While safely increasing horsepower and giving that extra boost that every driver appreciates, these front-mount units feature durable bar-and-plate cores that provide superior heat transfer and effectively reduce air intake temperatures. Mishimoto S-Line intercoolers are constructed of powdercoated 6061 aluminum and provide a fin pitch of 15 fins/in., along with large 3 in. cores and 3 in. inlets/outlets to flow 1,250 cfm. Additional features: * Robust, one-piece, cast aluminum end tanks withstand high-boost pressures * Four universal mounting points * TIG-welded to perfection * Mishimoto Lifetime Warranty * Available in silver or black * Note: For your taste, only one side of the intercooler has the Mishimoto logo
( 1 )
$346.95
—
$371.95
Mishimoto J-Line Race Edition intercoolers are small but mighty! Packing a big punch, these sleek front-mount units have been engineered to handle 500 hp and are perfect for cars with limited front-end space. The J-line intercoolers will allow you to run more power while preventing you from having to remove your crash bar. Mishimoto J-Line intercoolers are constructed of powdercoated 6061 aluminum, provide a fin pitch of 7 fins/in., are rated to 40 psi., and are designed with large 3.75 in. cores and 2.5 in. inlets/outlets to flow 1,250 cfm. Additional features: * Durable bar-and-plate core for superior heat transfer while effectively reducing air intake temperatures * Robust, one-piece, cast aluminum end tanks withstand high-boost pressures * TIG-welded for increased strength and durability * Mishimoto Lifetime Warranty * Available in silver, black, or gold * Note: For your taste, only one side of the intercooler has the Mishimoto logo
( 1 )
$329.35
—
$383.95
Earl's Performance HP inline fuel pumps are designed to work in perfect harmony with your carbureted or fuel injected race car, off-road truck, or any daily driver. They're built with gerotor technology which yields lightweight, quiet operation and 100,000-plus miles of durability. The pumps also feature improved hot fuel handling capabilities and are designed to greatly reduce the negative effects of heated fuel commonly found at many gas stations. Earl's HP inline fuel pumps are made of billet aluminum, offering superior durability and great looks. Order the flow rate and inlet size needed for your application.
( 2 )
$449.95
Vortech in-line universal fuel pumps are made with all the quality components and construction you'd expect from a name like Vortech. They feature high flow rates--up to 43 gph at 70 psi--and are fitted with a 1/2 in. inlet and a 5/16 in. outlet. Each pump also has a hose-barb nipple for the fuel line.
Not Yet Reviewed
$279.99
—
$437.99
On Sale
Get fuel where you need it to go using one of these FiTech fuel delivery kits. They include an upgraded 255 lph external electric fuel pump for engines making up to 600 hp. A 20 ft. section of EFI grade fuel hose is provided—suitable for both inlet and return hoses between the fuel tank and the engine. The FiTech fuel delivery kits also feature two billet aluminum fuel filters, push lock hose ends, and a mounting clamp for the electric pump.
( 20 )
$297.00
$267.30
DeatschWerks fuel rails offer the quality, performance and flexibility that fits your fueling needs. These vehicle-specific fuel rails offer higher flow, more plumbing options, and several unique features that go beyond what is currently available in the market. Engineered for use in both return and returnless configurations, these fuel rails are CNC-machined from billet aluminum, then are hard anodized in a black finish and feature integrated CNC brackets to provide easy bolt-on installation. In addition, DW's engineers invested significant design time with their fuel rails by removing excess material to shave weight and create a sleek signature look resulting in a component that looks as good as it performs. Order the DeatschWerks fuel rail model recommended for your application.
( 2 )
$419.00
Stewart Warner offers a line of electric fuel pumps compatible with gasoline, diesel, bio-diesel, and ethanol blends. The 12 V or 24 V units are engineered in various designs to fit a broad range of vehicles, with pressure and flow-rate options available. These fuel pumps can dry lift more than 48 in. and are dry-run-capable up to 4 hours. Durable and versatile, Stewart Warner replacement pumps help your carburetor to maintain optimum engine performance.
( 24 )
$357.99
These complete fuel system kits from Summit Racing™ come with a fuel pump and a regulator. You also get a canister fuel filter, fuel line, fittings, hose ends, plug, and insulated line clamps. They're the easy way to plumb your fuel system.
( 9 )
$275.94
—
$424.80
Nitrous Outlet plumbers kits upgrade your soft lines. These kits have plenty of hard line and hardware to convert your system to a clean, professional-looking setup. They can be bent tightly to stay close to your intake, and out of the way of moving parts. Each kit includes 3/16 in. hard line, black and red -3 AN B-nuts, and -3 AN sleeves. Whether you have a 4, 6, 8, or 10-cylinder, it's time to get the job done right with these Nitrous Outlet plumbers kits.
( 2 )
$253.99
—
$327.99
On Sale
NOS Cheater to Dual Shot Cheater upgrade kits allow you to convert your single stage system into a powerful dual stage setup. Kits include: * Two solenoids * Hard tube line * Stainless steel braided hose * Wiring * Inline nitrous filter * New push-button switch * All necessary mounting hardware
Not Yet Reviewed
$523.95
$288.95
In diesel engines, the effect of Snow Performance Stage-1 diesel water/methanol injection systems is threefold. First, the intercooling effect provides more available air and all the benefits of a higher positive pressure ratio—more power-giving fuel can be utilized safely without high-combustion temperatures. Second—the combustion of water provides more power on the power stroke. And third—the Methanol acts as an additional fuel for more power. Select the Snow Performance boost cooler Stage-1 diesel water/methanol injection system designed for your application needs.
( 2 )
$416.66
From the mother bottle to yours—Nitrous Outlet gravity feed transfer kits have everything you need to make the refill connection. These kits come with stainless steel braided hoses, hardware, valve, and even a nitrous filter to keep contaminants out of your bottle. If you race with nitrous, one of these gravity feed transfer kits is an essential and convenient assembly to keep on hand.
( 11 )
$258.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
