Availability
K&N custom plenums are designed to increase the amount of cold air entering your engine. They feature a snorkel that can be fitted with a hose or remote air filter to direct cold, incoming air directly into the carb. They're made from durable cast aluminum, and feature a black powdercoated finish with natural aluminum highlights.
Not Yet Reviewed
$346.99
On Sale
All of K&N's custom air filter assemblies include K&N's world-famous washable, reusable Filtercharger elements. These assemblies are available in many different sizes and styles, so there is sure to be one that suits your needs.
( 23 )
$262.99
Protect your turbocharged engine from harmful pressure buildup. These Turbosmart diesel blow-off valve controller kits are designed to control the pressure signal to the blow-off valve. They work by detecting a negative voltage change in the throttle position. They then energize a solenoid to vent the air out of the blow-off valve cap, causing a pressure differential between the piston of the blow-off valve and the cap, which will vent pressure from the intake system. Kits include: * Specific race port blow-off valve * Blow-off valve controller * Wiring loom * Electric solenoid with bracket * Reinforced pressure tubing * Hose clamps * Mounting hardware
( 1 )
$545.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$399.95
—
$525.95
$285.95
—
$472.95
Get maximum performance out of your small block Ford with Trick Flow® R-Series intake manifolds. They deliver substantial power increases in the 3,500-7,500 plus rpm range on heavily modified street/strip and race engines. Plus, they're made from A319 aluminum for lighter weight, have integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. For use with square bore four barrel carbs.
( 8 )
$411.99
—
$416.99
AFR Eliminator Series intake manifolds are the perfect way to "eliminate" your competition! These cast aluminum performance intakes have a 23-degree manifold configuration. They're designed for standard location intake port cylinder heads. Additional coolant outlets have been added at the rear of the manifold for custom cooling systems. Eliminator intakes can be run "as cast," right out of the box; however, AFR does recommend having the runner exits be "port matched" to your particular cylinder heads for optimal performance. Additional bungs have been cast into the top of the intake runners for EFI injectors or nitrous nozzles. Multiple heights and rpm ranges are available; order the manifold recommended for your application.
( 24 )
$412.65
—
$497.70
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases
( 437 )
$349.00
—
$449.00
On Sale
With Holley Terminator X 3.5 in. handheld controllers, your system vitals can be viewed with a quick glance. The full color, backlit LCD touch screen provides access to a wide range of tuning options and can also be used as a fully customizable data monitor. Holley Terminator X 3.5 in. handheld controllers include mounting sleeve, power and extension harness, SD card, and user manual CD. Features: * Laptop-free tuning changes to help optimize mileage, drivability, and performance * Basic tuning options allow simple adjustments of Basic Fuel, Fuel Learn, Basic Idle, Spark, and more * System tuning options allow modifications to Outputs, Engine Setup, Ignition Setup * Advanced tuning options allow fine tuning of Fuel, Closed Loop, Learn, and Idle (including IAC parameters and Idle Spark) * Monitor a vast number of parameters in pre-configured Multi-Gauge and Monitor Screens, or customize your own * Set up ECU datalogging, download datalogs to SD card, upload and download global folders via SD card, update ECU firmware, and adjust rev limiters 1 and 2
( 2 )
$349.95
$314.95
Does your vehicle constantly smell like raw gas? Do you hate keeping it in the garage because it makes the whole garage and house smell like gas? The Vapor Trapper Performance charcoal filter with Basic installation package from Shop 48 provides everything you need for a proper Vapor Trapper installation in on package! The Vapor Trapper is trusted by many pro shops nationwide as the go-to solution to eliminate the unwanted fuel smell from vintage cars, hot rods, trucks, and boats. The Shop 48 Vapor Trapper is a high-quality billet aluminum charcoal canister designed to eliminate fuel odors from vehicles with vented fuel tanks. It works by trapping fuel vapors using a specialized charcoal media blend, keeping your garage or cabin free of unwanted fumes. Designed for universal fitment, it installs easily in line with your fuel tank vent hose (fuel-rated vent hose is to be supplied by customer) and supports almost any inlet/outlet configuration. Plus, Vapor Trapper is fully serviceable and rechargeable, meaning you can replace the charcoal media when needed, keeping it performing like new for years to come. Built to handle the toughest conditions, the Vapor Trapper ensures the vehicle stays odor-free without restricting airflow or affecting fuel system performance. Whether you're restoring a classic, upgrading a hot rod, or maintaining a boat, it's a perfect solution for a clean, professional setup. Vapor Trapper Basic Install Package Includes: * (1) Vapor Trapper (select model for your application: 4 in, 6 in., or 8 in.) * (2) Barb fittings (select fittings for your application: 1/4 in. or 3/8 in.) * (2) Dell clamps * Available in silver or black anodized finishes (select finish you'd prefer) Note: Fuel-rated vent hose supplied by customer.
( 2 )
$329.00
—
$349.99
The "next generation of air intake technology" K&N 50 Series NextGen cold air intake kits are precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow. Every detail of the intake system is thoughtfully designed to deliver performance, plus make the installation process DIY-friendly. NextGen cold air intakes are dyno-tested to provide a guaranteed increase in horsepower and torque on your engine's stock tune, and they are back by K&N's 55+ years of engine protection. Enjoy the roar of your engine on acceleration without any drone at cruising speeds; select the K&N 50 Series NextGen cold air intake kit designed for your vehicle. NextGen CAI details: * High-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow to your engine and provides an increase in horsepower and torque with no tune required * Custom NextGen hybrid air box design incorporates an enlarged factory fresh air inlet for more airflow and lower inlet air temperatures * Easy-view open top for quick filter access * Oversized performance high-flow air filter, washable and reuseable, provides added surface area to flow more air and hold more dirt * Quick Lock air filter technology allows the filter to snap into place, and a sealing bead secures the system with just one hose clamp * CAD-designed large diameter tube with integrated airflow channels force an increase in velocity of air into your engine
( 10 )
$375.56
—
$449.99
On Sale
Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers give you access to a wide range of tuning options. These hand-held controls can be used as a fully customizable data monitor—and with the unit's 3 1/2 in. display, your Sniper EFI system vitals can be viewed at a quick glance! Monitor a vast number of parameters in pre-configured, multi-gauge, and monitor screens—or customize your own with Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers. Features and benefits include: * Full-color, backlit 3 1/2 in. touch-screen LCD * Laptop-free tuning changes to help optimize mileage, drivability, and performance * Basic tuning options allow simple adjustments of basic fuel, fuel learn, basic idle, spark, and more * System tuning options allow modifications to outputs, engine setup, and ignition setup * Advanced tuning options allow fine-tuning of fuel, closed loop, learn, and idle—including IAC parameters and idle spark * Set up ECU data-logging, download data-logs, or upload and download global folders with the SD card, update ECU firmware, and adjust rev limiters 1 and 2 * Includes the touch screen controller, mounting sleeve, power and extension harness, and SD card * Screen dimensions – 3.350 in. wide x 2.850 in. tall x 0.700 in. thick * Sleeve dimensions – 3.625 in. wide x 2.925 in. tall x 1.000 in. thick
( 1 )
$279.95
$251.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$339.95
—
$632.95
$305.95
—
$493.95
Turn up the heat up on big performance with Trick Flow® Track Heat® intake manifolds for your Ford 351C or Clevor. These single plane aluminum manifolds feature a high-rise, one-piece spider design and high-flowing individual extended runners for significantly more power in the 3,000-7,000 rpm range. Other features include OE 2V port locations and dimensions, a raised plenum floor for increased flow velocity and fuel atomization, integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. The manifolds will work in all 2V and 4V applications and with all square bore four barrel carbs.
( 8 )
$411.99
Tear up the track with a Trick Flow® Track Heat® intake manifold! These aluminum dual plane manifolds feature a one-piece spider-type design with extended, high-flow runners and a raised plenum floor for more horsepower and torque. Other highlights include A319 aluminum construction, integral bosses for nitrous nozzles, and extra material for custom porting. These intake manifolds deliver peak power in the in the 3,000 to 7,000 rpm range and work with all square bore-style carburetors.
( 17 )
$499.99
—
$524.99
Trick Flow® R-Series intake manifolds for small block fords are designed for maximum power delivery on heavily modified street/strip and race engines that operate in the 3,500-7,500+ rpm range--right where it's needed the most. Vital features include A319 aluminum construction, integral bosses for nitrous or fuel injection nozzles, and extra material for custom port work. These carb-style EFI manifolds accept standard Bosch or Siemens-type fuel injectors. Overall height to the mounting pad is 6.300 in. (5.0L/302) or 6.450 in. (351 Windsor).
( 4 )
$462.99
—
$468.99
Making your car one-of-a-kind is great--unless you can't find what you need. AEM Induction universal cold air intake kits solve your customizing problems, fitting your engine swap with lots of cool flowing air. AEM universal kits provide parts that offer you multiple options and configurations to create your own special high-flowing system. They also include an instruction guide to assist you on installing and tips on how to make everything fit and work together--mass air sensor setup, bracket placement, welding, tube connection, and more. AEM Induction universal cold air intake kits include: * AEM Dryflow filter * Three 4 in. diameter pre-bent aluminum tubes * Straight 36 in. long tube * 4 in. diameter tube * Seven assorted couplers (elbow, straight, and step) * Weld-on MAF sensor mount for Hitachi blade sensors * Two brackets * Two 1 in. long rubber mounts * Two 12 in. long weld-on mount brackets * Two weld-on 3/8 in. x 1 3/4 in. long nipples * Two 3 1/2 in. to 4 1/2 in. range hose clamps * 35 in. 3/8 in. breather hose
( 5 )
$350.99
Trick Flow® R-Series single plane intake manifolds for GM LS3 bring the simplicity of carbureted-style aspiration to GM's late model aluminum powerhouse. The intakes are engineered to produce supreme power in heavily modified engines with 3,500-7,500 plus RPM powerbands. Other significant features include A319 aluminum construction, a one-piece spider-type design, high-flow individual runners combined with a raised plenum floor, integral bosses for adding nitrous, and extra material for custom porting. The manifold accepts Holley 4150-style square bore carburetors. Overall height to the mounting pads is 6.285 in.
( 3 )
$424.99
Have you always wanted a cold air intake with a disposable filter--without sacrificing performance? S&B Filters dry filter cold air intake kits offer airflow comparable to their cotton filters with the same great protection. They typically last for 15,000 miles of highway driving and you can extend the life of the filter by blowing it out with compressed air (up to three times). Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 61 )
$349.00
—
$449.00
MagnaFuel ProTuner 625 Series inline fuel pumps feature quiet operation, which makes them ideal for street or performance use. They can support 1,500 hp and up, while offering continuous-duty use. Additional features include: * No pump shaft seals * CNC-machined, hard-anodized aircraft aluminum * High-torque custom motor with low current draw * Double support bearing * Can be mounted vertically or horizontally * Polymer wear plates for quiet, smooth operation * 12 amps at 45 psi * -8 AN inlet and outlet, fittings are sold separately
( 4 )
$464.99
Take a racing unit, make some precise modifications, test and you have an efficient high performance system at all speeds-- VaraRam VR-SC1R Z06 Snake Charmer Ram Air systems. With the input and testing of race teams, top tuners and VaraRam's relentless research and development program they developed one of the most powerful ram air systems for your Z06. Made of high quality cross link material for strength and longevity, these VR-SC1R Snake Charmer systems have a billet air meter and a reusable custom designed green filter with deeper pleats and more pleats per inch with open peaks and valleys for increased air flow showing up in lots of torque! Your friends will be in a trance as you shoot out of corners with the VR-SC1R Snake Charmer under your hood. Peak performance for your Z06 from VaraRam.
( 6 )
$481.99
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$361.00
—
$535.00
Does your vehicle constantly smell like raw gas? Do you hate keeping it in the garage because it makes the whole garage and house smell like gas? The Vapor Trapper Performance charcoal filter with Premium installation package from Shop 48 provides everything you need for a proper Vapor Trapper installation in on package! The Vapor Trapper is trusted by many pro shops nationwide as the go-to solution to eliminate the unwanted fuel smell from vintage cars, hot rods, trucks, and boats. The Shop 48 Vapor Trapper is a high-quality billet aluminum charcoal canister designed to eliminate fuel odors from vehicles with vented fuel tanks. It works by trapping fuel vapors using a specialized charcoal media blend, keeping your garage or cabin free of unwanted fumes. Designed for universal fitment, it installs easily in line with your fuel tank vent hose (fuel-rated vent hose is to be supplied by customer) and supports almost any inlet/outlet configuration. Plus, Vapor Trapper is fully serviceable and rechargeable, meaning you can replace the charcoal media when needed, keeping it performing like new for years to come. Built to handle the toughest conditions, the Vapor Trapper ensures the vehicle stays odor-free without restricting airflow or affecting fuel system performance. Whether you're restoring a classic, upgrading a hot rod, or maintaining a boat, it's a perfect solution for a clean, professional setup. Vapor Trapper Premium Install Package Includes: * (1) Vapor Trapper (select model for your application: 4 in, 6 in., or 8 in.) * (2) Barb fittings (select fittings for your application: 1/4 in. or 3/8 in.) * (2) Premium billet aluminum clamps * Available in silver or black anodized finishes (select finish you'd prefer) Note: Fuel-rated vent hose supplied by customer.
Not Yet Reviewed
$429.99
—
$449.99
Steeda's CNC-machined billet charge motion plates are superior upgrades for your Mustang. Steeda's charge motion plates are designed for a better port match to the intake manifold and cylinder heads than the original plates, reducing turbulence and improving airflow in the intake path for more horsepower and torque. Beautifully CNC-machined out of 6061-T6 aluminum for superior strength and light weight, Steeda's charge motion plates are available with tapped nitrous fitting holes for custom nitrous applications.
( 6 )
$349.95
Replace your broken or cracked intake manifold with an updated 1999-2004 Mustang GT 4.6L 2V PI intake from Ford Performance! The factory GT intake manifold had a plastic coolant crossover that eventually cracked over time, causing increased heat and wear to your engine. Ford Performance has now updated this intake manifold with a new runner design and tooling used to bring back a PI intake manifold. One of the largest improvements was to update the gaskets on the intake to more modern integrated O-ring seals for an easy installation without extra gaskets needed. Another major improvement was the change to an all-aluminum coolant crossover with two sensor bungs, which works with multiple applications. All mounting locations are reinforced and have metal threaded inserts for the fuel rail, coil packs, and lower intake plenum, compared to threading into plastic like other aftermarket options. Ford Performance also includes a new 195 degrees thermostat, thermostat gasket, and alternator bracket. Additional details: * Larger bell mouth * Shorter runner * More rounded runner * Deeper plenum * Fits 1999-2004 Power Improvement (PI) heads * Designed for off-road use; can be used on 1996-98 engines with Performance Improvement (PI) heads (custom calibration required) * Additional parts and modifications may be required * Eliminate irritating coolant leaks and ensure the engine in your 1999-2004 Mustang GT is performing as it should
Not Yet Reviewed
$467.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
