Availability
Mishimoto factory fit intercooler boot kits have been released as direct-fit silicone boot kits with DuraCore technology. DuraCore is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, this material provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of Mishimoto boots by preventing leaks and blowouts. To add even more reliability, the kits include constant-tension T-bolt clamps for accurate and consistent holding power. Keep your truck on the road by upgrading to these Mishimoto factory fit intercooler boot kits.
( 2 )
$252.95
—
$372.95
Green Filter factory replacement air filters deliver high performance—forever! Manufactured from recycled materials, the filters are stronger than stock, offer an OE fit, and will maintain maximum airflow for increased horsepower and fuel mileage. Their washable and reusable deep double-layered cotton pleats are encased in steel wire mesh and set in hand-molded flexible rubber bases for an airtight seal that also absorbs vibration. So, stop emptying your wallet and filling the landfills. Instead, increase your vehicle's performance with a Green high performance factory replacement air filter. They're available in a wide range of styles and sizes for both universal and vehicle-specific applications.
( 84 )
$259.47
—
$313.68
Jeeps are built for adventure, but stock setups have their limitations. aFe Dynamic Air Scoop snorkels help your Jeep overcome those limits by providing increased protection and airflow for your engine. With a snorkel you can tackle any terrain knowing that your engine is safe from harmful elements, and you'll be ready for whatever the trail throws your way. aFe D.A.S. snorkels boost engine performance and protection, offer easy maintenance along with a simple installation, and a precision fit that ensures each snorkel blends seamlessly with your Jeep's contours, enhancing the rugged aesthetic while delivering exceptional performance. Features: * Forward-facing inlet optimizes airflow to the engine, boosting efficiency, especially at higher speeds * The snorkel's fully sealable system and removable drain plug allow for safe deep-water crossings * No-cut, no-drill cowl pass-through design integrates with the factory airbox, making installation easy and reversible, ensuring original setup remains intact * Premium materials ensure the snorkel withstands the toughest environments * A removable runner section provides quick access to the battery and fuse box * Interchangeable grille and bezel let you personalize the snorkel to suit your style
( 2 )
$535.00
Sikky Manufacturing air intake kits are superior solutions to cobbling together an ill-fitting system with terrible flow. True to Sikky design and engineering, they started from the ground up designing specific couplers and an intake air filter to detailed specs, and then packaged them together in great looking performance kits. The final piece to any LS swap is a proper fitting, high-quality, air intake system. Sikky kits deliver the fit and performance to make your swap a success. Features include: * 4 in. CNC-bent aluminum tube * Silver anodizing for excellent durability * High-quality dry flow air filter (non-oiled) * High-quality couplers * All necessary clamps * Designed to offer maximum clearance between radiator and accessory pulleys * Suitable for import and domestic vehicles, including hot rods, as well as off-road vehicles
( 3 )
$319.19
Go Fast Bits VTAs are a performance blow-off valve solution for a wide range of foreign and domestic cars and trucks with an electronic factory diverter valve. If you want sound with your performance (or performance with your sound!), these VTAs offer just that! By combining the proven performance benefits of GFB's ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: "Keep what works, replace what doesn't." This means Go Fast Bits retained ECU control and the solenoid from the factory diverter to ensure the fastest possible response time—without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism; this is the part GFB has replaced. The VTA features CNC-machined billet components that last a lifetime, and the valve operation method has been updated for better performance. The factory diverter valve can only operate in two states: open or closed. When it opens fully at low boost or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of "pilot operation" in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It's this design philosophy that makes the VTA not only the best performing blow-off valve solution, but also the best value on the market. Order the VTA Performance blow-off valve model recommended for your vehicle. Key features: * TMS Technology for faster boost recovery on gear shift and during throttle modulation * Improved boost holding ability * Atmosphere venting for blow-off sound * Retains ECU control * Simple, direct bolt-on kits include everything you need to install
( 5 )
$251.10
—
$269.10
CSF intercoolers are a complete, full line of intercoolers--with coverage ranging from Audi to Volvo. Several different styles are available, including plastic-aluminum and all-aluminum, with standard tube and fin cores as well as heavy-duty bar and plate cores. CSF OE-replacement intercoolers provide a drop-in fit requiring no modifications. All CSF intercoolers are built to OE specifications, and incorporate the same high-quality and value that CSF has been known for and has represented in the industry for decades.
( 18 )
$499.00
Set your engine free to breathe cool, dense air for increased horsepower and fuel economy normally restrained by your factory air box. Roush Mustang cold air intake kits increase horsepower, torque, and fuel mileage with improved throttle response. These Mustang cold air intake kits are much more efficient than stock. They feature a reusable filter element that traps the smallest particles and a cool air dam that surrounds the filter to keep hot air from the engine and further maximize performance. Roush Mustang cold air intake kits are easy to install; just grab your basic tools, and you're ready. For a legendary ride, go with the performance engineers at Roush.
( 20 )
$287.99
—
$549.99
ICT Billet LSA supercharger lid spacers are used to increase airflow and velocity in the supercharger. They're compatible with both CTS-V and ZL-1 style LSA superchargers. Each order includes a 2-piece spacer kit with one supercharger perimeter gasket, one intercooler gasket, and mounting hardware.
( 2 )
$399.99
On Sale
Maximize your engine's performance with Airaid SynthaMax CAD cold air intake kits. The cold air dam design seals directly to the hood and isolates engine heat away from your intake, allowing cooler air to run through the system. These cold air intake kits feature dual-layered SynthaMax filters, constructed using the finest 100 percent synthetic materials for unrivaled filtering efficiency. Servicing the filters is easy with oil-free maintenance—simply wash them in a mild household detergent and rinse. Airaid SynthaMax cold air intake kits are built with a hand-poured urethane body that won't crack, curl, or shrink. They use the stock air filter location, but add a boost with a huge air inlet that keeps more cold air flowing through the 360 degree filter. Hundreds of models are available for a wide range of vehicle applications. Maximize your horsepower, torque, and fuel efficiency with Airaid SynthaMax CAD cold air intake kits.
( 27 )
$314.99
$264.99
On Sale
AEM Induction cold air intake kits outperform every other cold air kit on the market. The difference is in their mandrel-bent aluminum or polyethylene intake pipe, which relocates the air filter outside of the engine bay for a cooler, denser intake charge. Unlike many other kits available, each pipe is individually tuned, in both length and diameter, to a specific application for maximum power gains. These AEM Induction cold air intake kits include an air filter, intake tube, and complete hardware kit. Order the model designed for fitment and best performance on your specific vehicle.
( 103 )
$419.99
$369.99
With a goal of changing the marketplace, Excess Injectors intends to create the best tested, matched, and most accurate performance fuel injectors in the world and become the new standard for performance injectors. When you purchase a set of Excess injectors, you also gain access to the Exact Match Data app. This app allows you to unlock the full potential of your injectors by providing access to comprehensive testing and matching data, including data downloads for HP Tuners and more. With over 20 years of experience, they continue to help you build better, faster, more powerful and fuel efficient vehicles. Take your ride's performance to the next level with the Excess Injectors fuel injectors best suited for your application. Product features, items, and specifications include: * Tracking app features over 6,500 measured flow points on each injector * Measurement of flow slope done with 1,200 recorded flow samples * High flow slopes matched within one percent in every set * Dead times matched within two percent in every set * Cloud server access allows you to see how tightly matched your specific set is, flow profiles, and each injector's testing parameters for full disclosure
Not Yet Reviewed
$401.31
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$399.95
—
$525.95
$285.95
—
$472.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
Granatelli Motor Sports is proud to offer a variety of performance throttle bodies for late model, drive-by-wire engines. Their throttle bodies are precision-machined to exceed the demands required for increased airflow on high performance applications, both naturally aspirated and forced induction. These upgraded throttle bodies can be used with factory or aftermarket manifolds and utilize the OEM harness connector. The increased size also allows for smoother and quicker engine acceleration--and there's no need to transfer anything over from the factory unit. Proper tuning is highly recommended after installation. Granatelli throttle bodies are available for hundreds of vehicles from the 1990s and up.
( 10 )
$423.94
JLT cold air intakes are engineered to minimize air restriction and increase airflow far better than your stock system. The intake tube is roto-molded plastic with a huge filer opening for superior airflow and no heat soak like metal tubes. The air filter is custom-built for super smooth and fast airflow and has huge deep pleats for more surface area than filters that look much bigger. The ABS plastic heatshield blocks engine heat at idle and low speed. It uses a large area to make sure the filter has tons of cool air and uses the factory fresh air inlet from the bumper to keep temps cool. Improve your vehicles horsepower and performance with one of JLT's cold air intakes!
( 1 )
$259.00
—
$449.00
Supercharged Gen III Hemi engines have a relatively large intercooler manifold on the back of the supercharger; therefore, the factory manifold may cause clearance issues in an engine swap into a classic muscle car or truck. Earl's Gen III Hemi Supercharger intercooler manifolds are the solution. They are shorter, providing an additional 1.875 in. of clearance, and allows the use of AN hoses for the coolant. Order the Supercharged Gen III Hemi intercooler manifold recommended for your application. Additional product features and details: * Fits: 2015 and up Gen III Hemi 6.2L Hellcat engines * Billet aluminum intercooler manifold with black anodized finish * Replaces bulky factory manifold * Provides additional clearance at the back of the engine to firewall * 1.875 in. shorter than the factory intercooler manifold; extra firewall clearance in engine swap * Two -10 AN female O-ring ports * Works with factory sensor (3/8 in. NPT female port) and bleeder (1/8 in. NPT female port)
Not Yet Reviewed
$499.95
The "next generation of air intake technology" K&N 50 Series NextGen cold air intake kits are precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow. Every detail of the intake system is thoughtfully designed to deliver performance, plus make the installation process DIY-friendly. NextGen cold air intakes are dyno-tested to provide a guaranteed increase in horsepower and torque on your engine's stock tune, and they are back by K&N's 55+ years of engine protection. Enjoy the roar of your engine on acceleration without any drone at cruising speeds; select the K&N 50 Series NextGen cold air intake kit designed for your vehicle. NextGen CAI details: * High-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow to your engine and provides an increase in horsepower and torque with no tune required * Custom NextGen hybrid air box design incorporates an enlarged factory fresh air inlet for more airflow and lower inlet air temperatures * Easy-view open top for quick filter access * Oversized performance high-flow air filter, washable and reuseable, provides added surface area to flow more air and hold more dirt * Quick Lock air filter technology allows the filter to snap into place, and a sealing bead secures the system with just one hose clamp * CAD-designed large diameter tube with integrated airflow channels force an increase in velocity of air into your engine
( 10 )
$375.56
—
$449.99
Momentum Pro 5R air intake systems from aFe are designed around a large pre-oiled 7.5 in. tall, oval, cotton media filter with five layers of progressively finer mesh to maximize performance. These incredible filters fit into equally impressive one-piece housings with auxiliary air scoops and large clear sight windows. When combined with the housings, these aFe air intake systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro 5R air intake systems.
( 12 )
$361.00
—
$475.00
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$339.95
—
$632.95
$305.95
—
$493.95
Keep the fuels flowing with Edelbrock Quiet-Flo electric fuel pumps. They're engineered with heavy-duty internals for extreme durability; while the inline fuel flow design keeps everything cool, even in harsh environments. The housings are constructed of aluminum and have a hard anodized finish for great looks. Edelbrock tests every Quiet-Flo fuel pump at the factory to ensure dependable, lasting performance. Some units also include mounting brackets. Order the model with the inlet/outlet sizes, fuel pressure, and flow rate desired for your gasoline or methanol application.
( 115 )
$295.95
—
$307.95
On Sale
FASS Fuel Systems Titanium Series replacement pumps are far superior to your factory fuel filter. They have a filtration rating of 3 micron, and the added filtration will help improve your engine's idle and extend the life of the injectors and injection pump. These systems feature a compact design with a very powerful motor which holds up to the most extreme conditions—and is capable of flow rates of up to 220 gph. In addition to improved fuel flow, the FASS Titanium Series lift pumps offer an advanced filtration method for your diesel fuel, removing water, air, vapor, and debris. Universal-fit and application-specific models are available.
( 23 )
$299.25
—
$418.00
$269.32
—
$376.20
Roush cold air intakes feature a premium reusable air filter with a mounting clamp and a custom-formed, glass-filled nylon air box tray. Some models will include a high-flow 3 in. stainless steel induction tube. These intakes utilize your factory PCM calibration and give you a sleek black factory look. You'll gain power and performance with a Roush cold air intake, available for fitment on dozens of vehicle applications.
( 37 )
$362.99
—
$439.99
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$549.95
$274.95
—
$531.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
