Availability
Showing In Stock Items. Show All 277 Items.
Mishimoto factory fit intercooler boot kits have been released as direct-fit silicone boot kits with DuraCore technology. DuraCore is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, this material provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of Mishimoto boots by preventing leaks and blowouts. To add even more reliability, the kits include constant-tension T-bolt clamps for accurate and consistent holding power. Keep your truck on the road by upgrading to these Mishimoto factory fit intercooler boot kits.
( 2 )
$252.95
—
$372.95
Green Filter factory replacement air filters deliver high performance—forever! Manufactured from recycled materials, the filters are stronger than stock, offer an OE fit, and will maintain maximum airflow for increased horsepower and fuel mileage. Their washable and reusable deep double-layered cotton pleats are encased in steel wire mesh and set in hand-molded flexible rubber bases for an airtight seal that also absorbs vibration. So, stop emptying your wallet and filling the landfills. Instead, increase your vehicle's performance with a Green high performance factory replacement air filter. They're available in a wide range of styles and sizes for both universal and vehicle-specific applications.
( 84 )
$259.47
—
$313.68
Jeeps are built for adventure, but stock setups have their limitations. aFe Dynamic Air Scoop snorkels help your Jeep overcome those limits by providing increased protection and airflow for your engine. With a snorkel you can tackle any terrain knowing that your engine is safe from harmful elements, and you'll be ready for whatever the trail throws your way. aFe D.A.S. snorkels boost engine performance and protection, offer easy maintenance along with a simple installation, and a precision fit that ensures each snorkel blends seamlessly with your Jeep's contours, enhancing the rugged aesthetic while delivering exceptional performance. Features: * Forward-facing inlet optimizes airflow to the engine, boosting efficiency, especially at higher speeds * The snorkel's fully sealable system and removable drain plug allow for safe deep-water crossings * No-cut, no-drill cowl pass-through design integrates with the factory airbox, making installation easy and reversible, ensuring original setup remains intact * Premium materials ensure the snorkel withstands the toughest environments * A removable runner section provides quick access to the battery and fuse box * Interchangeable grille and bezel let you personalize the snorkel to suit your style
( 2 )
$535.00
Sikky Manufacturing air intake kits are superior solutions to cobbling together an ill-fitting system with terrible flow. True to Sikky design and engineering, they started from the ground up designing specific couplers and an intake air filter to detailed specs, and then packaged them together in great looking performance kits. The final piece to any LS swap is a proper fitting, high-quality, air intake system. Sikky kits deliver the fit and performance to make your swap a success. Features include: * 4 in. CNC-bent aluminum tube * Silver anodizing for excellent durability * High-quality dry flow air filter (non-oiled) * High-quality couplers * All necessary clamps * Designed to offer maximum clearance between radiator and accessory pulleys * Suitable for import and domestic vehicles, including hot rods, as well as off-road vehicles
( 3 )
$319.19
Go Fast Bits VTAs are a performance blow-off valve solution for a wide range of foreign and domestic cars and trucks with an electronic factory diverter valve. If you want sound with your performance (or performance with your sound!), these VTAs offer just that! By combining the proven performance benefits of GFB's ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: "Keep what works, replace what doesn't." This means Go Fast Bits retained ECU control and the solenoid from the factory diverter to ensure the fastest possible response time—without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism; this is the part GFB has replaced. The VTA features CNC-machined billet components that last a lifetime, and the valve operation method has been updated for better performance. The factory diverter valve can only operate in two states: open or closed. When it opens fully at low boost or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of "pilot operation" in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It's this design philosophy that makes the VTA not only the best performing blow-off valve solution, but also the best value on the market. Order the VTA Performance blow-off valve model recommended for your vehicle. Key features: * TMS Technology for faster boost recovery on gear shift and during throttle modulation * Improved boost holding ability * Atmosphere venting for blow-off sound * Retains ECU control * Simple, direct bolt-on kits include everything you need to install
( 5 )
$251.10
—
$269.10
CSF intercoolers are a complete, full line of intercoolers--with coverage ranging from Audi to Volvo. Several different styles are available, including plastic-aluminum and all-aluminum, with standard tube and fin cores as well as heavy-duty bar and plate cores. CSF OE-replacement intercoolers provide a drop-in fit requiring no modifications. All CSF intercoolers are built to OE specifications, and incorporate the same high-quality and value that CSF has been known for and has represented in the industry for decades.
( 18 )
$499.00
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$399.95
—
$525.95
$285.95
—
$472.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
Granatelli Motor Sports is proud to offer a variety of performance throttle bodies for late model, drive-by-wire engines. Their throttle bodies are precision-machined to exceed the demands required for increased airflow on high performance applications, both naturally aspirated and forced induction. These upgraded throttle bodies can be used with factory or aftermarket manifolds and utilize the OEM harness connector. The increased size also allows for smoother and quicker engine acceleration--and there's no need to transfer anything over from the factory unit. Proper tuning is highly recommended after installation. Granatelli throttle bodies are available for hundreds of vehicles from the 1990s and up.
( 10 )
$423.94
JLT cold air intakes are engineered to minimize air restriction and increase airflow far better than your stock system. The intake tube is roto-molded plastic with a huge filer opening for superior airflow and no heat soak like metal tubes. The air filter is custom-built for super smooth and fast airflow and has huge deep pleats for more surface area than filters that look much bigger. The ABS plastic heatshield blocks engine heat at idle and low speed. It uses a large area to make sure the filter has tons of cool air and uses the factory fresh air inlet from the bumper to keep temps cool. Improve your vehicles horsepower and performance with one of JLT's cold air intakes!
( 1 )
$319.00
—
$449.00
Supercharged Gen III Hemi engines have a relatively large intercooler manifold on the back of the supercharger; therefore, the factory manifold may cause clearance issues in an engine swap into a classic muscle car or truck. Earl's Gen III Hemi Supercharger intercooler manifolds are the solution. They are shorter, providing an additional 1.875 in. of clearance, and allows the use of AN hoses for the coolant. Order the Supercharged Gen III Hemi intercooler manifold recommended for your application. Additional product features and details: * Fits: 2015 and up Gen III Hemi 6.2L Hellcat engines * Billet aluminum intercooler manifold with black anodized finish * Replaces bulky factory manifold * Provides additional clearance at the back of the engine to firewall * 1.875 in. shorter than the factory intercooler manifold; extra firewall clearance in engine swap * Two -10 AN female O-ring ports * Works with factory sensor (3/8 in. NPT female port) and bleeder (1/8 in. NPT female port)
Not Yet Reviewed
$499.95
The "next generation of air intake technology" K&N 50 Series NextGen cold air intake kits are precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow. Every detail of the intake system is thoughtfully designed to deliver performance, plus make the installation process DIY-friendly. NextGen cold air intakes are dyno-tested to provide a guaranteed increase in horsepower and torque on your engine's stock tune, and they are back by K&N's 55+ years of engine protection. Enjoy the roar of your engine on acceleration without any drone at cruising speeds; select the K&N 50 Series NextGen cold air intake kit designed for your vehicle. NextGen CAI details: * High-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow to your engine and provides an increase in horsepower and torque with no tune required * Custom NextGen hybrid air box design incorporates an enlarged factory fresh air inlet for more airflow and lower inlet air temperatures * Easy-view open top for quick filter access * Oversized performance high-flow air filter, washable and reuseable, provides added surface area to flow more air and hold more dirt * Quick Lock air filter technology allows the filter to snap into place, and a sealing bead secures the system with just one hose clamp * CAD-designed large diameter tube with integrated airflow channels force an increase in velocity of air into your engine
( 10 )
$375.56
—
$449.99
Momentum Pro 5R air intake systems from aFe are designed around a large pre-oiled 7.5 in. tall, oval, cotton media filter with five layers of progressively finer mesh to maximize performance. These incredible filters fit into equally impressive one-piece housings with auxiliary air scoops and large clear sight windows. When combined with the housings, these aFe air intake systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro 5R air intake systems.
( 12 )
$361.00
—
$475.00
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$339.95
—
$632.95
$305.95
—
$493.95
Keep the fuels flowing with Edelbrock Quiet-Flo electric fuel pumps. They're engineered with heavy-duty internals for extreme durability; while the inline fuel flow design keeps everything cool, even in harsh environments. The housings are constructed of aluminum and have a hard anodized finish for great looks. Edelbrock tests every Quiet-Flo fuel pump at the factory to ensure dependable, lasting performance. Some units also include mounting brackets. Order the model with the inlet/outlet sizes, fuel pressure, and flow rate desired for your gasoline or methanol application.
( 115 )
$295.95
—
$307.95
On Sale
FASS Fuel Systems Titanium Series replacement pumps are far superior to your factory fuel filter. They have a filtration rating of 3 micron, and the added filtration will help improve your engine's idle and extend the life of the injectors and injection pump. These systems feature a compact design with a very powerful motor which holds up to the most extreme conditions—and is capable of flow rates of up to 220 gph. In addition to improved fuel flow, the FASS Titanium Series lift pumps offer an advanced filtration method for your diesel fuel, removing water, air, vapor, and debris. Universal-fit and application-specific models are available.
( 23 )
$299.25
—
$394.25
$269.32
—
$354.82
Roush cold air intakes feature a premium reusable air filter with a mounting clamp and a custom-formed, glass-filled nylon air box tray. Some models will include a high-flow 3 in. stainless steel induction tube. These intakes utilize your factory PCM calibration and give you a sleek black factory look. You'll gain power and performance with a Roush cold air intake, available for fitment on dozens of vehicle applications.
( 37 )
$362.99
—
$439.99
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$549.95
$274.95
—
$531.95
Summit Bucks
Cold Air Inductions intake systems have a simple goal--maximizing your vehicle's performance by keeping your intake air as cool as possible! First, every CAI intake is specifically designed and engineered for the vehicle it is sold for, resulting in maximum performance, an easy install, and a perfect fit. Next, their intakes are made of high-quality aluminum--not heat-absorbing plastic. Their intake tubes have a ceramic coating both inside and out to reduce heat soak, as well as to keep radiant heat from penetrating the intake air. And they've applied 3/8 in. thermal insulation inside the air box to prevent heat transfer from the engine bay. Each cold air intake is TIG-welded by hand and powdercoated, plus the air box lids feature a clear viewing window for easier filter inspection. What should a high performance cold air intake system look like? Just like Cold Air Inductions intake systems! Additional features include: * High performance lifetime air filters provide protection with minimal airflow restriction * Black couplers and elbows made from 4 or 5-ply silicone rubber for durability * Entire system meets OEM standards and requirements * Stainless steel clamps and fasteners * Direct replacements for factory air intakes--no tuning required * Everything needed for installation is included * Many systems are available with your choice of near-chrome or textured black powdercoat * Most systems are direct replacements for the OEM air box--no modifications required and the OEM washer bottle is retained in the stock location
( 180 )
$299.99
—
$399.99
On Sale
Holley Sniper in-tank fuel pump modules are direct-fit units to drop directly into the specific vehicle application. Two modules--the Sniper 340 lph and Holley 525 lph--feature a 6061 T-6 flange that has a bright dip black anodized finish for corrosion protection and long-lasting good looks. The flanges have a 6AN O-ring outlet and return port making the plumbing connections easy. The assembled modules include a new filter sock and the lock ring to complete the installation into your stock fuel tank. Choose the module designed for your vehicle. Notes: * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for the specific application * 340 lph module supports up to 700 EFI or 900 hp carbureted * 525 lph module supports up to 1,200 EFI or 1,450 hp carbureted * Both EFI and carbureted systems will need a bypass design regulator
Not Yet Reviewed
$519.95
$466.95
On Sale
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 110 )
$284.96
—
$469.46
$256.46
—
$422.51
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 229 )
$259.99
—
$485.99
On Sale
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$524.99
$287.24
—
$474.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
