Availability
Showing In Stock Items. Show All 16 Items.
Rein Automotive intake manifold adjusting units are made to factory specifications ensuring proper fit, form, and function. They adjust intake runner length to optimize the vehicle's performance throughout the entire rpm range by adjusting airflow to the engine. Rein Automotive intake manifold adjusting units aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE component. Order the unit model designed for fitment on your vehicle.
Not Yet Reviewed
$332.99
Trick Flow® is no stranger to substantially improving airflow. These replacement EFI lower intake manifold bases are the foundation for Trick Flow's® high-horsepower aluminum EFI intake manifold kits. They're made from A319 aluminum and are computer-modeled to produce maximum torque and horsepower. The bases are available in several styles and finishes for Ford 5.0L, 351 Windsor, 4.6L 2V, 351C, and Clevor engines. Units must be used with corresponding Trick Flow® upper intake plenum.
( 8 )
$399.99
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 56 )
$339.99
—
$379.99
$319.99
—
$339.99
With Offenhauser single-quad intake manifolds, you can replace an old-style induction systems with an updated manifold. These units blend some of the nostalgic look of the older systems with the improved power, responsiveness, and ease of tuning of a modern 4-barrel. Their design equalizes distribution to all cylinders for better efficiency throughout the rpm range. The single-quad intakes are offered in multiple configurations to fit different applications.
( 32 )
$572.99
On Sale
Fit your GM Gen V LT1 Holley Hi-Ram manifold with one of their LT Hi-Ram intake plenum tops. Holley offers several versions of these cast aluminum units for your dual 4150 or 4500 carburetors. They're available with a black or natural finish. Complete your tunnel ram intake with Holley LT Modular Hi-Ram intake manifold tops; order the model recommended for your year/make and engine application. Features include: * Modular design with removable top * Overall height: 12.10 in. with carb-style top * Height at plenum flange: 9.44 in. * O-ring seals on plenum top * Easy assembly with top-mounted screws on plenum top (all except front two screws)
( 1 )
$280.95
—
$299.95
If you want to build a carbureted LS3 engine. Edelbrock's Performer RPM LS3 intake manifolds afford you that opportunity. Originally computer-controlled engines, you can top your LS3 with one of these Performer RPM manifolds and a carburetor to gain maximum power and a broad torque curve. They include provisions for a timing control module, passages for clean-look wiring, and a special throttle/transmission bracket to make these units an easy retro-fit. Go carbureted with Edelbrock Performer RPM LS3 intake manifolds.
( 1 )
$422.95
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
( 1 )
$449.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 439 )
$374.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$484.95
On Sale
Holley Pro-Jection intake manifolds are designed for Holley 2-barrel Pro-Jection systems. The high-rise, dual-plane manifolds are perfect for powerband ranges from idle to 6,000 rpm. With these manifolds, there is no need for manifold-to-TBI adapters. To make installation easy Holley utilizes late model alternator and A/C bracket mounting bosses and include provisions for an EGR valve and vacuum taps off of the runners. Power is made easy with Holley Pro-Jection intake manifolds.
( 6 )
$433.95
—
$504.95
$328.95
—
$389.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
