Availability
Showing In Stock Items. Show All 22 Items.
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
Supercharged Gen III Hemi engines have a relatively large intercooler manifold on the back of the supercharger; therefore, the factory manifold may cause clearance issues in an engine swap into a classic muscle car or truck. Earl's Gen III Hemi Supercharger intercooler manifolds are the solution. They are shorter, providing an additional 1.875 in. of clearance, and allows the use of AN hoses for the coolant. Order the Supercharged Gen III Hemi intercooler manifold recommended for your application. Additional product features and details: * Fits: 2015 and up Gen III Hemi 6.2L Hellcat engines * Billet aluminum intercooler manifold with black anodized finish * Replaces bulky factory manifold * Provides additional clearance at the back of the engine to firewall * 1.875 in. shorter than the factory intercooler manifold; extra firewall clearance in engine swap * Two -10 AN female O-ring ports * Works with factory sensor (3/8 in. NPT female port) and bleeder (1/8 in. NPT female port)
Not Yet Reviewed
$499.95
Replace your broken or cracked intake manifold with an updated 1999-2004 Mustang GT 4.6L 2V PI intake from Ford Performance! The factory GT intake manifold had a plastic coolant crossover that eventually cracked over time, causing increased heat and wear to your engine. Ford Performance has now updated this intake manifold with a new runner design and tooling used to bring back a PI intake manifold. One of the largest improvements was to update the gaskets on the intake to more modern integrated O-ring seals for an easy installation without extra gaskets needed. Another major improvement was the change to an all-aluminum coolant crossover with two sensor bungs, which works with multiple applications. All mounting locations are reinforced and have metal threaded inserts for the fuel rail, coil packs, and lower intake plenum, compared to threading into plastic like other aftermarket options. Ford Performance also includes a new 195 degrees thermostat, thermostat gasket, and alternator bracket. Additional details: * Larger bell mouth * Shorter runner * More rounded runner * Deeper plenum * Fits 1999-2004 Power Improvement (PI) heads * Designed for off-road use; can be used on 1996-98 engines with Performance Improvement (PI) heads (custom calibration required) * Additional parts and modifications may be required * Eliminate irritating coolant leaks and ensure the engine in your 1999-2004 Mustang GT is performing as it should
Not Yet Reviewed
$467.99
Tuned Port Injected (TPI) engines with Vortec heads are a reality, thanks to the Chevrolet Performance team. Their engine dynometer tests have shown a 40 hp gain with the new Vortec TPI base plate and stock Vortec heads versus the stock L98 engine. The Vortec TPI base manifold was designed from the original GM TPI intake to be a universal fit for Chevrolet/Pontiac cars (1985-92) that were equipped with factory Tuned Port Fuel Injection—and the cylinder heads have been replaced with the new style raised-port improved flowing Vortec heads from Chevrolet Performance. * Performance gains: In-house testing has proven a gain of 40 hp over a stock L98 engine. The larger runners of the TPI Vortec baseplate, combined with the excellent flow characteristics of the GM Vortec heads, produced 300 hp on an otherwise stock L98 engine. Other modifications such as camshafts, rocker arms, and injectors produced as much as 375 hp with the stock computer and throttle body. Testing was performed with a mass airflow (MAF) sensor system. * Minor modifications required: TPI Vortec baseplates are a universal design that we patterned after the original GM TPI baseplate. Because it is a universal design, you should first test fit all components that bolt directly to the intake and make any required modification prior to final installation. Some modifications may be required of the external components related to the intake and EGR systems.
Not Yet Reviewed
$449.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$549.95
$493.95
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
$508.95
These aFe EGR Coolers utilize larger-than-OEM diameter tubes with a thicker wall to reduce clogging, extend life, and resist failure. They are manufactured from stainless steel with all connections TIG-welded, not braised, and pressure-tested at the factory. They feature a direct-flow design providing seven large diameter flow-through tubes to resist clogging, resulting in the extended life of the cooler. The heat exchanger tube wall thickness is more than twice as thick as the OEM versions.
( 3 )
$484.05
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$450.95
Hamburger's Performance LS lifter valley covers take functionality and wrap it up in a high-tech, high-class package. These quality covers fit Gen III (Non-DoD) engines, and are milled from a solid block of 6061-T6 aircraft aluminum to tolerances only attainable through CNC machining. They offer outstanding block rigidity, while the precision machined under side provides an excellent seal using the existing factory O-ring. The wide chamfered edges ensure adequate intake manifold runner clearance. Finished with a hard anodizing, these covers really stand out when used on carbureted LS engines.
Not Yet Reviewed
$261.99
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$517.95
$284.95
On Sale
Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.
( 10 )
$512.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$446.95
$402.26
—
$509.95
On Sale
Holley EFI LS single plane mid-rise intake manifolds are great for your higher horsepower engine. Featuring cast aluminum construction, these manifolds are also great for centrifugal blower, turbocharged, or NOS mild power adder applications. The efficient casting design is lightweight--11.5 lbs.--with consistent wall thickness and strong mounting flanges. The optimized runner layout and constant cross sectional area offer a broad torque curve, with the best vehicle performance from 2,500 to 7,000 rpm. The mid-rise design offers minimum carb mounting flange height--without sacrificing power--and is another plus for vehicles with minimum hood modifications. Holley EFI LS single plane mid-rise intake manifolds include zinc-plated hex head cap mounting bolts and washers, pipe plugs to block manifold vacuum and MAP sensor ports, and Viton® O-ring cylinder head mounting flange gaskets for an OEM-style seal.
( 9 )
$479.95
—
$549.95
$430.95
—
$493.95
Turn up the heat up on big performance with Trick Flow® Track Heat® intake manifolds for your Ford 351C or Clevor. These single plane aluminum manifolds feature a high-rise, one-piece spider design and high-flowing individual extended runners for significantly more power in the 3,000-7,000 rpm range. Other features include OE 2V port locations and dimensions, a raised plenum floor for increased flow velocity and fuel atomization, integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. The manifolds will work in all 2V and 4V applications and with all square bore four barrel carbs.
( 8 )
$411.99
On Sale
These Edelbrock Buick B-4B intake manifolds are a resurrection of the popular B-4B manifolds made in the late 1960s for street use. The only change to the original design is the addition of Edelbrock's proven Performer-style mounting pad that accepts either square bore or spread bore carburetors. That addition makes these manifolds an excellent choice for both restoration and performance-minded Buick fans.
( 5 )
$573.95
$516.56
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
