Availability
Wilwood SV-GT Series directional vane brake rotors use the increased cooling capacity and improved structural stability of the staggered vane design. They are manufactured from premium-grade, long-grain carbon iron for long wear, high-thermal conductivity, and extreme resistance to distortion. Wilwood SV-GT Series directional vane brake rotors are fully machined to eliminate stress points and maintain less than .001 in. flatness, parallelism, and runout over the entire rotor. Their unique, asymmetrical face groove pattern provides smoother engagement through reduced harmonics and even pad wear from improved thermal balanced rotor faces. The Wilwood SV-GT Series directional vane brake rotors are individually spin-balanced to ensure vibration-free performance at all speeds.
( 4 )
$419.00
—
$428.71
Wilwood lug drive dynamic hats have a design that allows you to incorporate a new rotor mounting system that eliminates the rotor bolts and allows the rotors to move independently of the hats. They help rotors stay flat and run true, while keeping braking response and pedal feel consistent. Pad knock-back and rotor drag are both eliminated as well. These hats cause all problems associated with thermal distortion to be eliminated, including bolt hole alignment issues when trying to reinstall new rotors on previously used hats.
Not Yet Reviewed
$282.27
Wilwood truck hats offer lightweight strength for your truck, SUV, or 4WD vehicle. These hats are precision-machined from premium aluminum alloys and feature threaded rotor mount holes for use with standard through-hole mount rotors. Wilwood truck hats feature strengthening ribs on a flared bell configuration for big rotor brake kits on several lug configurations.
Not Yet Reviewed
$317.56
—
$374.79
Clearance
Wilwood GT rotor and lug drive hat assemblies are pre-assembled packages of Wilwood's latest and greatest technology and design. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. They are paired with GT 72 Curved Vane Spec-37 rotors that are manufactured from a proprietary iron alloy developed to withstand extreme temperatures—with the highest possible degree of resistance against distortion, warping, cracking, and wear. Left and right side assemblies are available separately.
Not Yet Reviewed
$694.99
$288.50
—
$381.88
Wilwood's Big Brake Dynamic Lug Drive hats incorporate a new rotor mounting system that eliminates the rotor bolts and allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points, therefore, the rotors stay flatter and run truer. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. A large, single snap-ring retains the rotor in the hat, making assembly and installation literally a snap. There's no longer a need to torque or safety wire rotor mounting bolts. These lightweight stainless alloy discs are additionally drilled, removing unnecessary rotating weight from driveline. Key features and benefits include: * Brake response and pedal feel remain consistent * Pad knock back, and rotor drag are eliminated * The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors * All problems associated with thermal distortion, including bolt hole alignment issues when trying to re-install new rotors on a previously used hat are eliminated
Not Yet Reviewed
$263.72
—
$317.61
Wilwood Big Brake Dynamic flared bell hats are precision-machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature dynamic mount T-nut mount holes for use with standard through-hole mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, Big Brake Dynamic hats provide solid, reliable performance in the most demanding conditions. Short offset hats are for narrow space applications and maximize clearance. They're available for most rotor bolt patterns in a variety of 4- and 5-lug wheel patterns.
Not Yet Reviewed
$282.27
Wilwood Ultralite HP 32 vane rotor and hats extend the service life of brakes on heavier competition vehicles and other severe-duty applications. These replacement rotors are precision-machined to less than .001 in. tolerance for overall flatness, parallelism, and radial runout on Wilwood's long-grain carbon iron castings. Plus, their superior thermal conductivity and stability properties resist distortion and fatigue. For racing or everyday use, Wilwood Ultralite HP 32 vane rotor and hats are a great choice. Order the size, surface style, and bolt pattern needed for your application.
( 3 )
$251.36
—
$352.82
Wilwood GT Series curved vane rotors are built for the extreme conditions of professional motorsports. The superior heat absorption and dissipation characteristics of these heavy-wall rotors are the keys to preventing heat-fade—and realizing a long service life from the rotors and pads. All rotors are cast from premium-grade, long-grain carbon iron for extended wear, thermal stability, and resistance to distortion. Wilwood GT rotors are fully detail-machined to eliminate stress points and unnecessary weight away from the pad sweep face. Each rotor faces and O.D. is precision-turned to less than .001 in. for flatness, parallelism, and runout. An asymmetrical face slot pattern provides smoother engagement through reduced harmonics—and improved thermal balance between the I.D. and O.D. of the rotor. Every rotor is then individually dynamic-balanced to offer vibration-free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme-braking short tracks and road course competition.
( 16 )
$292.85
—
$454.31
Wilwood Super Alloy series rotors are manufactured to improve overall performance for a wide range of competition applications. With their lowered rotating weight, you'll experience quicker acceleration, deceleration, and improved handling; without shrinkage, warping, or degradation. Wilwood's specially formulated ferrous alloy manufacturing process gives these rotors high resistance to thermal distortion with excellent friction and wear characteristics against the pads, low maintenance without the need for coatings, and it passes all sanctioning body magnetic tests. Their drilled, slotted, or scalloped design gives you excellent high-temperature stability, rapid heat dissipation, and consistent performance from the brake pads.
Not Yet Reviewed
$254.04
—
$266.79
Wilwood GT 72 Series curved vane Spec-37 Dynamic lug mount rotors are machined from a proprietary iron alloy developed to withstand extreme temperatures—with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme-duty military-spec rotors that are manufactured by Wilwood. Combined with the proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you're assured the smoothest braking available. GTB rotors also feature a black e-coat finish for applications where corrosion resistance is a concern. Wilwood offers the driver and passenger side GT 72 Series curved vane rotors separately.
( 1 )
$441.06
—
$454.31
If you've had a Wilwood front disc brake kit on your ride for a while and notice the effects of worn-out hubs, the complete solution is at your fingertips. These replacement forged billet aluminum brake hub assemblies are made from premium-grade alloy, crafted into shape under high heat and pressure, and then CNC-machined for a precise fit on each vehicle application. Wilwood brake hub assemblies are available for a variety of spindle types and rotor styles, and some packages include new bearing races and aluminum caps.
( 20 )
$317.57
Wilwood HD Series curved vane brake rotors can handle the heat and keep you in the race. These HD curved vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. They are precision-machined to less than .001 in. runout, flatness, and parallelism, and receive full detail machining and smooth pad contact faces without slots. At the track or on the road, Wilwood HD Series curved vane brake rotors are right at home.
Not Yet Reviewed
$321.99
Wilwood GT Series dynamic mount rotor drag hats are engineered to withstand the rigors and demands of your extreme motorsports competition. The hats are precision-machined from premium-grade aluminum, offering high strength with low unsprung and rotating weight. Wilwood T-nuts float within the hat and provide for true dynamic mounting of standard through-hole mount rotors. The wide load-bearing load surface of the T-nut and the straight-through hole mount rotors provide the most durable and accurate method of isolating potential pad engagement harmonics and the in-service thermal variations that occur between the hat and the rotor. Wilwood GT Series dynamic mount hats are available in a variety of configurations for use with racing hubs, flanged axles, and several OE applications.
Not Yet Reviewed
$299.91
Wilwood offers drum brake backing plates for a variety of applications, including many Ford, Chevy, and GMC axles. These replacements are manufactured from high-strength aluminum alloy and use steel clinch nuts for caliper bracket or accessory mounting. Each backing plate comes fully populated with drum parking brake shoes, springs and adjusters.
( 1 )
$387.95
—
$406.50
For custom, show, and high performance sport driving, SRP rotors offer the high-tech look and improved performance of a directional cross-drill and face slot pattern. The venting and cleaning action of the holes and slots reduce pad glaze, disperse gasses, and decrease heat generated at the pad-to-rotor interface. The holes and slots also inhibit irregular pad compound buildup on the rotor faces, resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung weight. Each rotor is precision-machined to less than .001 in. tolerances for overall flatness, parallelism, and radial run-out on long-grain carbon-iron castings. The rotors are finished with a black electro coat or silver zinc wash finish to provide corrosion resistance. SRP rotors are available in all popular sizes used in Wilwood's Pro Series and Big Brake conversion kits.
( 27 )
$294.61
—
$485.17
Wilwood steel rotors are constructed from a special high-strength steel alloy, with a processing technique that provides greater strength, stability, and resistance to warping. They're great for use on lightweight formula, open wheel, dirt track, and drag race cars—because the rotors don't require continuous thermal cycling or cooling periods. Their lightweight design greatly reduces rotating mass and unsprung weight. Each replacement rotor is ground for flatness and plated with a protective coating. They're available in solid, cross-drilled, and slotted designs. Order the size needed for your vehicle application.
( 13 )
$254.74
—
$422.99
Wilwood brake caliper mounting brackets are designed to keep your caliper in the right position for your aftermarket brake kit. They're made from quality aluminum or steel and feature a black finish to resist rust and corrosion. These replacement brackets are available for dozens of front and rear axle model applications. Order the individual bracket or set recommended for your brake kit part number.
( 41 )
$387.95
—
$441.13
These Wilwood parking brake hats are premium-grade hats and are used with Wilwood internal shoe parking brake kits. They are precision-machined and electro-coated for corrosion resistance. If you're in need of new parking brake hats, Wilwood has what you need.
Not Yet Reviewed
$374.79
Would you love to have the braking power of dual piston calipers, but don't have the room on your 1968 or later GM car or truck? Now you do with Wilwood D52 dual piston caliper kits. These 2-piston calipers offer the high performance halting power you want and are built to mount in the stock location with stock-sized rotors! The D52 dual piston calipers are crafted with forged billet aluminum bodies, stainless steel pistons, and competition-style high-temperature seals. They provide low-maintenance performance and a huge weight savings with high-temperature reliability for the street and track. You'll have no more of the rust, bore pitting, or seal failures that plague the OEM caliper design. These much-improved red powdercoated D52 caliper kits are available for the front and rear and include pads and slide bolts. Bring your muscle to a stop--upgrade to GM D52 dual piston caliper kits from Wilwood.
( 134 )
$484.13
Wilwood C10 Steel ProSpindles provide a pair of one-piece drop spindles with integrated steering arms, constructed from a proprietary grade of cast from steel, and black e-coated. They are specifically designed for use with Wilwood disc brake kits and have a 2.50 in. drop for a more aggressive stance without affecting steering geometry. They are designed with a traditional bearing snout that supports Wilwood kit-specific hubs in both 5 x 4.75 in. and 5 x 5.00 in., or 6 x 5.50 in. wheel bolt circles. Select the C10 Steel ProSpindles designed for your vehicle.
( 2 )
$419.21
Wilwood C1500 Steel ProSpindle kits contain a pair of one-piece drop spindles with integrated steering arms specifically designed for use with Wilwood disc brake kits. They feature a 2.00 in. drop that provides an aggressive stance without affecting steering geometry. Constructed from a proprietary grade of cast steel and given a black e-coat, they have a traditional bearing snout that supports Wilwood kit-specific hubs in both 5 x 4.75 in. and 5 x 5.00 in. wheel bolt circles.
( 2 )
$419.21
Wilwood AFX ProSpindles are high-strength steel spindles for GM A-, F-, and X-body vehicles that use the original bolt-on steering arms. They are specifically designed for use with Wilwood disc brake kits with a 2.00 in. drop for a more aggressive stance without affecting steering geometry. They offer the added benefits of providing a lower center of gravity, raised front roll center, and a decreased camber change, improving handling with less body roll. Wilwood AFX ProSpindles install using the OE ball joints using original or aftermarket control arms.
( 3 )
$317.57
Wilwood Mustang II Aluminum ProSpindle kits include steering arm and hub assembly, and are precision engineered for use in fabricated A-arm suspensions on kit cars, street rods, drag cars, and other custom or race applications configured around Pinto/Mustang II suspension geometry. ProSpindle bodies are one-piece forged aluminum construction and the bolt-on, sealed dual mount bearing hub supports 5 x 4.50 in./4.75 in. bolt patterns. The 2 in. dropped spindle pin provides the desired lowered ride height without disturbing the suspension geometry. The bolt-on (front steer) steering arm is strong and can be replaced by custom designed steering arm to accommodate rear steer configurations.
Not Yet Reviewed
$444.41
Wilwood forged DynaPro 6A lug-mount calipers combine pure-bred racing technology with contemporary design—to deliver superior braking and high-tech style on a wide range of custom, show, and competition vehicles. They feature reinforced triple bridge construction, with five high-strength steel bridge bolts, making them the strongest and stiffest DynaPro 6 calipers ever built. These replacements offer direct interchange with a 5.25 in. pattern lug mount DynaPro and Dynalite calipers. Additional information: * Forged aluminum caliper material * Six-piston differential bore body * Stainless steel pistons with high-temperature seals * Accommodate rotors up to 13 in. diameter and widths from .38 in. to 1.10 in. * Available in or red or black powdercoat, or Quick-Silver nickel base plated finish
( 2 )
$352.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
