Availability
Get one of these Rhodes Race Cars Pro Series anti-roll bar/sway bar kits for your ride, and let the performance begin! They are available in 24 in. and 36 in. frame rail widths and feature 1 1/2 in. diameter, .188 in. wall 4130 chromoly shafts that pivot on PTFE bushings for smooth and controlled body roll. The 4130 weld-on arms in these RRC kits will not slip or become loose like bolt-on arms. They work on cars up to 1,500 hp and up to 4,000 lbs. RRC Pro Series anti-roll kits come complete with all mounting tabs, rod ends, and Grade 8 hardware.
( 8 )
$324.95
—
$340.00
Control wheel stands and put more power into moving the car forward. Get Rhodes Race Cars Sportsman Series wheelie bars for your vehicle today. Features and benefits: * Made from 1 1/8 in. diameter, .058 wall, 4130 chromoly tubing for the ultimate in strength * Main tubes come with TIG-welded wheel brackets installed * Wheel brackets are made from 4130 chromoly with a second hole to raise the wheelie bar for additional ground clearance during loading and unloading * Designed to be 70 in. from center of the rear end housing to center of the wheelie bar wheel * Comes complete with mild steel rod ends, pull pins, aluminum wheels, and all hardware necessary (welding required) * Welded kits available with lower section completely welded * Welded kits have upper bars with one threaded bung welded in; the second bung must be welded in once height has been established
( 6 )
$349.95
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 141 )
$334.95
—
$534.95
Rhodes Race Cars Funny Car cage conversion kits include all the tubing necessary to upgrade your existing roll cage. These conversion kits can be installed in virtually any existing roll cage or tube chassis vehicle. The tubing is purposely left long so that it can be cut to fit to your vehicle's particular chassis application. Funny Car cage conversion kits are available in the following materials: * 1 5/8 in. X .134 in. wall ERW mild steel * 1 5/8 in. X .120 in. wall DOM * 1 5/8 in. X .083 in. wall chromoly
( 6 )
$309.95
—
$324.95
Rhodes Race Cars roll cage conversion kits are designed to convert your existing roll bar into a 10, 12 or even 14-point roll cage. RRC conversion kits meet or exceed the NHRA and IHRA requirement for roll cage tubing. These kits include roof tubes, windshield post runners, and dash crossmember. Conversion kits may be available in any of the following materials: * 1-5/8 in. x .134 in. wall mild steel tubing * 1-5/8 in. x .120 in. wall DOM tubing * 1-5/8 in. x .083 in. wall 4130 chromoly tubing Note, because of differing driver sizes and main hoop locations, these kits are not notched!
( 6 )
$274.95
—
$474.95
Rhodes Race Cars double-adjustable ladder bar kits are available in mild steel or chromoly. These RRC bars highlight their unique design that reduces binding and side load on the ladder bars, making re-installing them after adjustments a breeze. RRC ladder bar kits feature either 1 in. diameter .156 wall DOM tubing, or 1 3/8 in. lower and 1 1/4 in. upper .095 wall chromoly tubes. Rhodes Race Cars double-adjustable ladder bar kits include: * Durable black powdercoated finish * Rod end safety loops * Rod ends, adjusters, jam nuts, and Grade 8 hardware * Sportsman housing brackets * Set up for 33 in. from center of housing to center of rod end
( 2 )
$299.95
—
$499.95
Rhodes Race Cars Elite Series wishbone kits are the best way to keep your rear-end centered in the vehicle. These RRC kits eliminate the binding that can occur when using a diagonal link or panhard bar. Rhodes Elite wishbone kits include: * 1 in. diameter .083 in. wall 4130 chromoly tubing * 4130 chromoly greaseable slide tube * 4130 chromoly billet chassis mounts * 4130 Elite Series housing mount * 4130 RRC Elite HD rod ends * NAS hardware
( 1 )
$299.95
Rhodes Race Cars Pro Series 4-link suspension kits are for competitive racers building their performance ride. Package specs and features: * 1/4 in. mild steel Sportsman Series housing and chassis brackets * Housing brackets have integrated shock and wheelie bar mounts * Housing brackets are for 3 in. axle housing tubes * 1 1/4 in. O.D. .095 wall chromoly 4-link tubes * 4 left and 4 right hand 3/4 in.-16 weld-in threaded bungs * Coilover shock mounting kit * Grade 8 mounting hardware * Overall length is 18 in.
( 3 )
$299.95
When it comes to high-horsepower applications, Rhodes Race Cars fabricated Ford 9 in. housings are the only way to go. Available in 48 in. and 60 in. lengths, all the kits feature face plates with 3/8 in. press-in studs, billet aluminum fill caps, and drain fittings. Mild steel housings have 3 in. axle tubes; chromoly housings use 3 1/2 in. axle tubes. They are available with many different options--get one for your ride today. Un-welded kits require a rear end housing fixture (sold separately) to ensure proper axle alignment. Welded kits are available from mild to wild for a wide range of horsepower applications and feature: * Housing ends of your choice * 4-link or ladder bar brackets * Mild steel or chromoly back braces
( 17 )
$274.95
—
$439.95
Rhodes Race Cars Radial Series 4-link brackets are designed to provide a strong, adjustable mounting platform for a 4-link suspension system in high-horsepower drag cars, specifically those using radial tires. These brackets are engineered to handle the extreme forces and torque generated by radial tire drag racing and help control wheelie action. By providing a strong, adjustable, and purpose-built mounting system, Rhodes Race Cars Radial Series 4-link brackets help racers achieve better launches and improved consistency, as well as overall enhanced performance on the track. Order the brackets for your application needs. Product Overview: * Set of (4) brackets * Made from 1/4 in. thick mild steel or 4130 Chromoly for strength and durability * Available for 2 3/4 in., 3 in., 3 1/4 in., and 3 1/2 in. axle tubes * Hosing brackets mount directly to the axle housing tubes and often include integrated shock mounts and Pro-Jack mounts * Chassis brackets mount to the vehicle's chassis * The 4-link geometry, when properly tuned, helps to transfer power to the tires more efficiently, preventing excessive wheelspin and maximizing acceleration * Provides adjustability in mounting locations for the 4-link bars, allowing racers to fine-tune the suspension for optimal performance * The design helps control wheelie action by managing how the rear axle lifts during acceleration * Features 1/2 in. holes for rod ends
Not Yet Reviewed
$299.95
Rhodes Race Cars offers Elite Series housing brackets to facilitate your chassis and suspension fabrication. Machined from 1/4 in. or 3/8 in. 4130 chromoly steel, these brackets are available in different styles, including with wheelie bar and shock mounts. Order the set best suited for your application.
Not Yet Reviewed
$299.95
You should have the advantages of Rhodes Race Cars Sportsman Series 4-link suspension kits for your car. Features and specs: * 1/4 in. mild steel housing and chassis brackets * Housing brackets are for 3 in. axle housing tubes * 1 in. O.D. .156 in. thick wall DOM 4-link tubes * Grade 8 mounting hardware * Overall length is 18 in.
Not Yet Reviewed
$274.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
