Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
OER Authorized Bolt-In IFS Conversion Kits
OER Authorized bolt-in IFS conversion kits are available for 1947-54 GM pickups with a V8 engine. The kits will improve your vehicle's ride, handling, and performance. These steel crossmember kits convert your antiquated stock front suspension and steering box to a more modern 1974-78 Mustang II or 1974-80 Pinto/Bobcat setup. Enjoy better handling with the addition of rack and pinion steering and twice the suspension travel when compared to stock. Combine this advancement in steering and suspension with the added benefit of modern braking power, and this setup becomes a no-brainer. The bolt-in kit is designed for use on 1947-54 Chevy 1/2 ton or light-duty 3/4 ton frames, and will drop the ride height approximately 2 1/2 to 3 in. using stock Mustang II front spindles. Lower control arm pivot tubes and gussets are not included in this kit. (A weld-in crossmember it is also available, if preferred.) Specs: * Bolt-in components. No welding required * Proven Mustang II geometry * Can use stock 1974-78 Mustang II or 1974-80 Pinto suspension components, except control arms. * Requires tubular control arms (strut-less style lowers) * Interlocking bolt-in boxing plates reinforce frame for strength * Requires power steering rack * Stock spindles will drop ride height 2-1/2" - 3 inches * Will work with small block or big block Chevy engines * Not for use with air-ride front ends Note: Additional items may be needed to complete installation, including but not limited to tubular control arms, spindles, coilover springs/shocks, rack and pinion steering, tie rods, calipers, rotors, inner tie-rod extensions. Important: Lower control arms need to be level with the ground (with all the weight on the vehicle) for correct steering geometry.
( 1 )
$404.99
OER Lower Dash Instrument Panels
These lower dash instrument panels are OER quality reproductions of the original lower dash panel section that houses the in-dash radio--the glove box section and air vent assembly. These panels are manufactured to exact specifications and include the same grain as the original to bring that authentic look back to your ride.
( 3 )
$269.99
OER Fuel Tank Kits
These OER fuel tank kits were made to replace all of the necessary components on multiple applications. Each kit provides the individual components needed for a complete replacement. When looking to replace your fuel tank, make sure that you take care of everything else with these OER fuel tank kits.
( 13 )
$308.33
—
$476.33
OER Rear Leaf Springs
OER rear leaf springs are quality reproductions of the original designed to exact specifications to ensure the correct fit, form, and function. These leaf springs are available in applications to fit different make and model vehicles.
( 52 )
$489.99
OER Shifter Assemblies
Your shifter's been discontinued? OER shifter assemblies could be your solution. Their components offer original fit, superior quality, and an authentic appearance to replace your worn, damaged, or missing original equipment assemblies. Many are licensed by GM and include the correct linkage. Get the right fit and a great classic look with OER Reproduction shifter assemblies.
( 10 )
$286.99
OER Gas Tanks
OER offers gas tanks for countless applications from the 1940s and up. Leaky or rusted fuel tanks are both costly and dangerous. These replacements are careful reproductions of the originals, in a variety of sizes, configurations, materials and finishes. All OER gas tanks are meticulously constructed to factory specifications for a proper fit for your specific vehicle. Additional details: * Includes lock ring and O-ring gasket for the fuel sender * Does not include fuel sender (sold separately) * Zinc coated steel tanks offer standard corrosion resistance * OE-quality ni-terne coated steel fuel tanks provide better corrosion resistance * Polished stainless steel fuel tanks offer both show-quality appearance and superior corrosion resistance
( 20 )
$319.99
—
$430.99
OER Authorized 1967-74 GM F/X-Body Upper Control Arms
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1967-74 GM F/X-body upper control arms are reproductions of the original-style arms designed for various GM models. They include pre-installed bushings, shafts, and ball joints. Restore your classic's suspension with OER Authorized control arms.
Not Yet Reviewed
$256.99
OER Authorized Gas Tanks
OER Authorized gas tanks are manufactured with high standards to last a long-life of clean, debris-free fuel for your vehicle. Impact resistant construction will hold up to road and rough driving conditions. A tight seal will keep moisture from entering your fuel system.
( 46 )
$257.99
—
$485.99
OER Authorized 1967-74 GM F/X-Body Lower Control Arms
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1967-74 GM F/X-body lower control arms are reproductions of the original-style arms designed for various GM models. They include pre-installed bushings, shafts, and ball joints. Restore your classic's suspension with OER Authorized control arms.
( 1 )
$279.99
OER Authorized Heater Boxes
OER Authorized heater boxes are authentic reproductions of your original assembly. These detailed replacements are manufactured to exact factory dimensions and contours for classic car applications from the 1960s, '70s, and '80s. Depending on the model you select, the heater box may be crafted from original-style polymer or stamped steel with an EDP coating for rust prevention. Features may include: interior air control doors and flaps, heater core mount, fan chamber, fresh air inlet, case clips and gasket set, heater tube retainer plate, and more. Order the model recommended for your vehicle.
( 5 )
$279.99
—
$291.99
OER Authorized 1965-70 Chevy Tubular Control Arms
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1965-70 Chevy tubular control arms are engineered for maximum strength and visual impact. Designed as stock replacements, the arms capture both sides of the bushing, unlike the originals that only retained one side. This safety feature allows full control with virtually no flex on the control arm when cornering. They are available in pairs for upper or lower or as a set with both upper and lower control arms. Choose the ones you prefer.
( 2 )
$347.98
OER Authorized 1958-64 Chevy Full Size Upper Control Arms
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1958-64 Chevy full size upper control arms offer an original appearance, steel construction, a black powdercoat finish, and feature pre-installed rubber bushings, shafts, and ball joints. Restore your classic's suspension with OER Authorized control arms.
Not Yet Reviewed
$315.99
OER Authorized Fuel Tank Relocation Kits
OER Authorized fuel tank relocation kits meet or exceed OER's stringent quality control standards. Offering several choices, each kit will relocate the fuel tank from inside the cab to underneath the truck on the frame rail, helping to eliminate gas fumes in the cab, while adding the benefit of more interior storage space. Conversion kits are available for your classic pickup, whether stock or custom, with a 20-gallon side fill tank or a 17-gallon top fill tank that relocates the neck of the tank 3 in. from the left of your bed's centerline. All OER Authorized fuel tank relocation kits will include tank, straps, and the correct ohm fuel sending unit with gasket and lock ring. Select the kit designed for your truck.
Not Yet Reviewed
$287.99
OER 1968 Chevelle Dash Gauge Clusters
OER 1968 Chevelle dash gauge clusters are reproductions of the in-dash clock and gauge cluster for 1968 Chevelle and El Camino models. Manufactured exactly as the original GM-issued part, they feature sweeping individual gauges for fuel, temperature, oil, and battery, along with a quartz movement clock and one-piece gauge face plate. OER's gauge clusters are constructed from stamped steel with the correct colors and fonts, just like the originals. Restore your vehicle's interior the right way with OER 1968 dash gauge clusters.
Not Yet Reviewed
$364.99
OER Authorized Disc Brake Drop Spindles
OER Authorized disc brake drop spindles are available for a wide variety of classic GM and Mopar vehicles. They allow you to correctly lower the front end of your car in conjunction with lowering springs and shocks. These replacements are for use on cars with factory disc brakes—or can be used to convert cars that originally came with drum brakes in the front. Order the pair recommended for your application.
( 3 )
$319.99
OER Authorized Radiator Supports
If you're restoring a car with a rusted or damaged radiator support, then OER Authorized has the solution! These high-quality radiator supports are available for a variety of applications. OER Authorized radiator supports are constructed from stamped steel and are EDP coated for durability. OER Authorized radiator supports are quality reproductions that will directly replace the originals. These supports feature predrilled holes for an easy installation.
( 15 )
$264.99
