Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
JET Streetmaster Quadrajet Stage 2 Carburetors
JET Streetmaster Quadrajet Stage 2 carburetors have all the same great attributes of JET's Stage 1 versions—plus the additional benefits of fully recalibrated idle, off idle, main, accelerator pump, and high-speed circuits to match any modifications done to the engine, such as the intake manifold, headers, ignition, or mild cam change. With the JET Streetmaster Quadrajet Stage 2 carburetors, you can expect improved idle quality, and instant throttle response, along with maximum torque and horsepower for street/strip vehicles, tow vehicles, RVs, and watercraft with modified engines.
( 124 )
$499.99
JET Rochester 2G Stage 1 Carburetors
JET Rochester 2G Stage 1 carburetors are perfect for use in Circle Track racing. JET begins with a .130 in. needle and seat assembly for adequate fuel supply, and a small diameter float for maximum float blow volume. The cluster is then modified, based on engine and vehicle specs, to keep the fuel curve correct throughout the rpm range. Idle, transition, and accelerator pump circuits are modified for each specific application. The 2Gs are then tapped to accept Holley jets for ease of tuning, and finished with a 3/8 in. fuel inlet. Only the highest quality components are used throughout the assembly process as the 2Gs are returned to factory color and condition.
( 14 )
$409.99
JET Streetmaster Quadrajet Stage 1 Carburetors
The JET Streetmaster Quadrajet Stage 1 carburetors start with a complete disassembly of the hand selected core, cleaning and inspection procedure. The casting plugs are sealed with epoxy to prevent leak-down into the intake manifold. All circuits are checked for proper sizing and the calibration is checked for proper jets, primary metering rods and secondary metering rods. The carburetor is then carefully reassembled using the highest quality components with a new float, choke pull-off and bronze brushed throttle shafts. Stage 1 Quadrajet carburetors are intended to restore factory stock performance. Not intended for engines with RV or performance type cams.
( 39 )
$499.99
JET Powr-Flo Throttle Bodies
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 111 )
$334.99
—
$499.99
JET Rochester Big Block Quadrajet Carburetors
JET Performance has released these Quadrajet carburetors for Chevy and GMC cars and trucks with 396 c.i.d. and larger modified big block engines. The carburetors are extensively reworked with an increased main well size and are balanced to ensure top-end high-rpm fuel flow. Several circuit modifications are made to keep the fuel curve correct throughout the entire rpm range and to keep consistent idle quality. The carburetors include a .149 in. needle and seat to ensure adequate fuel flow. They are designed for modified big block motors with dual plane intake manifolds, headers, an 8.5-9.5:1 compression ratio, and mild ported or aftermarket heads.
( 15 )
$499.99
JET Marine Carburetors
JET offers a complete line of marine carburetors to keep your boat motoring the waterways. They are remanufactured using the highest quality parts to meet strict quality standards and ensure high performance for your boat. Don't be left in the wash--power your vessel with quality remanufactured JET marine carburetors.
( 19 )
$499.99
JET Circle Track Quadrajet Carburetors
These JET Circle Track Quadrajet carburetors feature an increased main well size and they are balanced to ensure high-rpm fuel flow. Several circuit modifications have been made for a richer fuel curve throughout the entire rpm range, particularly at wide-open throttle. The JET Circle Track Quadrajet carburetors include a 0.149 in. needle and seat to ensure adequate fuel flow. They are designed for heavily modified 355-406 c.i.d. small block motors with a single plane intake manifold, headers, an 11.5:1 compression ratio, and high-flowing cylinder heads. These JET Circle Track Quadrajet carburetors are the perfect choice for consistent performance, lap after lap.
( 4 )
$499.99
JET Powr-Flo Mass Airflow Sensors
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$259.99
—
$373.99
JET Stage 2 Computer Chips/Modules
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 113 )
$329.99
—
$341.99
JET Stage 1 Computer Chips/Modules
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$314.99
—
$340.99
JET Ford Computer Modules
These performance modules from JET will improve the performance of your Ford car or truck with very little work. Perfect for vehicles with little or no modifications, they're programmed for power increases under hard throttle conditions such as towing and wide-open throttle. They offer a full range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno-tested to ensure the most possible power without affecting drivability or fuel economy.
( 46 )
$314.99
—
$334.99
JET V-Force Plus Power Control Modules
These V-Force Plus power control modules are designed for the performance enthusiast who wants improved performance, acceleration, and the ability to monitor vehicle information. V-Force Plus power control modules are designed around a 20 MHz RISC processor. V-Force Plus power control modules optimize ignition advance and fuel maps for optimum horsepower and drivability. In addition, the software in the program allows you to select from 14 different screens to monitor throttle position, mass airflow, manifold pressure, fuel economy, and air/fuel ratio. This allows you to monitor your driving habits for the best fuel economy and performance.
( 12 )
$319.99
JET Underdrive Pulley Kits
JET underdrive pulley sets reclaim lost horsepower and mileage by reducing the drag placed on the engine to drive the accessories, such as the air conditioning, power steering, and water pump. The pulleys slow down these accessories to allow the engine to turn with less effort without any adverse effect on the operation of A/C, power steering, charging, or cooling systems. Installation consists of simple bolt-on replacement of the stock pulleys. Kits include pulleys, hardware, complete instructions, and part number for new serpentine belt as most kits will require use of smaller size belt. Belt is not included with kit. The number and type of pulleys will vary per application.
( 12 )
$262.99
—
$358.99
