Availability
On Sale
Holley EFI fuel system plumbing kits are the perfect complement to your Sniper EFI or Holley EFI kit. These plumbing assemblies are engineered using Holley fuel pumps, regulators, and filters—coupled with Earl's Performance plumbing, to provide a fuel system tailored to your vehicle's specific needs. Components vary, depending on the kit you select.
( 34 )
$368.95
—
$528.95
$332.05
—
$475.95
On Sale
Holley Sniper EFI Stealth fuel crossover kits are designed to be used with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems. These pre-assembled fuel crossovers are designed to provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. Available in two variations, both contain a braided fuel hose with crimp-on ends for a leak-free installation and two fuel bowl standoffs. One variation includes a T-fitting and the other a black anodized billet fuel regulator, preset to 58.5 psi, and a mounting bracket.
( 1 )
$319.95
$287.95
On Sale
Holley offers a selection of both dedicated and universal-style fuel lines for their carburetors. Hard lines are chrome plated and double flared at the outlets. Braided stainless steel lines offer premium features such as rugged billet-style construction and AN aluminum fittings.
( 171 )
$266.95
—
$281.95
On Sale
The amazing HydraMat fuel pickups feature Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks, as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. The Holley HydraMat fuel pickups are the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. Holley HydraMats are available in various sizes and shapes to fit a wide variety of stock fuel tanks and/or race fuel cells. Features and benefits: * Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells * Greatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and/or engine stalling * Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions * Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells * Not for use with diesel fuels
( 64 )
$499.95
$278.95
—
$448.95
On Sale
Holley boost control solenoids are designed for optimal performance when using the boost control function of Holley EFI. Some setups require two solenoids and some require one. They're driven by a Pulse Width Modulated (PWM) output of the ECU. It is advised NOT to use the PWM+ outputs on a Holley HP ECU, but rather use the PWM- outputs. If you have a Holley Dominator ECU, use either the PWM- outputs or a PWM+ output on the J2B connector.
( 4 )
$449.95
$403.95
On Sale
Holley bypass fuel pressure regulator kits are part of a complete line of fuel system products from Holley. Offering several different kits, each features a billet or diecast aluminum regulator with an adjustable psi for precise fuel pressure changes and they are finished for corrosion resistance and good looks. The regulators are fitted with a 1/8 in. NPT gauge port and include an Earl's fuel pressure gauge, three adapter fittings, a barbed fitting for the vacuum port, a mounting bracket, and all necessary hardware. Choose the kit to best fit your project's needs and performance.
( 30 )
$349.95
$269.95
—
$331.95
On Sale
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$415.95
$299.95
—
$373.95
Holley EFI water and methanol injection solenoids, when used with their other water/meth injection components take your forced induction ride to the next level. Integrated into the Holley HP and Dominator EFI Systems is the capability to control water/methanol injection, allowing you to safely run on lower octane pump gas! These solenoids are run by an injector driver output and are compatible with a water/methanol mix of up to 50 percent methanol.
Not Yet Reviewed
$449.95
On Sale
Holley universal, in-line fuel pumps are intended for fuel injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They're all rated for continuous duty service and have been tested up to 2,500 hours. The high-output versions are great for serious performance work. These pumps should be mounted below the fuel level of the tank for a good gravity feed on the inlet side. Features include: * OE-proven design * Lightweight and compact * Fits most EFI applications including turbo and supercharged * Not for use on aircraft of any type
( 41 )
$318.95
$287.05
Looking for a pump that is quiet, stylish, powerful, and dependable? Holley HP Series fuel pumps feature an exclusive gerotor gearset that quietly and efficiently pumps the fuel without the noise of traditional vane pumps. The chrome motor and trick powdercoated bracket match the mil-spec hard anodized base for unmatched beauty and durability. While these pumps have the capability to feed stout race engines, they are equally at home on the street due to their design and construction techniques. These pumps set new industry standards for appearance and design while providing maximum pumping efficiency. They are equally at home on the street as well as at the races. Features include: * Gerotor design for quiet, smooth operation and durability * Black Mil-spec nickel PTFE hard anodized billet base * Show quality chrome 12 V motor * Profiled, black powdercoated mounting bracket * Laser engraved Holley logo and inlet/outlet designations * 3/8 in. NPT inlet and outlet fittings
( 105 )
$436.95
On Sale
Holley Sniper 3.5 GPM Twin Pump and Manifold Kits are designed for high performance naturally aspirated and forced induction EFI vehicles. The twin pump manifold utilizes -10 AN male inlet and -8 AN male outlet connections for easy installation on new applications and for quick replacement of existing competitor fuel pumps. They support over 1,000 hp Compatible with Gasoline or E85. The Max Flow is 3.5 gpm @13.5V and 4 gpm @18V. The pump manifold assembly is made from billet, anodized, and laser etched for good looks. The manifold inlet and outlet manifolds have 2 ORB ports each to accommodate for different mounting and plumbing situations. Plugs are included to seal off unused ports. The kit includes connectors, seals and detailed assembly instructions. Holley Sniper 3.5 GPM Twin Pump and Manifold Kits feature: * Max amperage: 20A (per pump) * Rated for gas and E-85, pump life will be diminished if used with 100 percent ethanol fuels * Billet, anodized, laser etched components for good looks * Manifold -10 AN male inlet fitting and -8 AN male outlet fitting included, others must be purchased separately * Pump I/O: -8 AN ORB * Pumps can be staged or ran in parallel * Inlet and outlet manifolds have 2 ORB ports each to accommodate for different mounting and plumbing situations. Plugs are included to seal off unused ports * Wiring kits for each pump that contain connectors and seals included * Detailed assembly instructions included * Can be used in both EFI and carbureted fuel systems
( 2 )
$435.95
$391.95
On Sale
Holley Sniper GPA Series in-tank fuel pumps feature oven-brazed fittings that can withstand up to 100 psi. Designed for Sniper EFI fuel tanks, each of these electric fuel pump assemblies includes a genuine Walbro fuel pump. Additional features include: * 1/4 in. NPT supply and return line * In-tank wire harness * Heavy 10-gauge no-warp mounting plate * Barbed vent fittings
( 3 )
$475.95
$399.95
—
$427.95
On Sale
Holley LS valve cover adapter plates offer an innovative way to add the vintage styling cues of a 1958-86 small block Chevy perimeter bolt valve cover to your modern GM LS engine. These cast aluminum adapter plates include hardware to mount three different generations of coil packs under the valve cover without the need of any coil relocation kit, and you retain all the benefits of OE-style coil-on-plug mounting. These adapter plates feature an integrated oil fill and are pre-threaded for PCV ventilation fittings.
( 4 )
$292.95
—
$299.95
$263.65
—
$269.95
On Sale
Holley 450 lph fuel pump modules feature billet pump flanges that connect to either single or dual 450 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 450 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
( 2 )
$549.95
$493.95
On Sale
Holley 340 lph fuel pump modules feature billet pump flanges that connect to either single or dual 340 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 340 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
Not Yet Reviewed
$516.95
$464.95
On Sale
Holley VR Series fuel pressure regulators are part of their VR1 and VR2 Series brushless fuel systems product line. Designed to handle large volumes of fuel flow, they are capable of supporting 3,000+ horsepower. They are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance. Holley VR Series fuel pressure regulators are available in 2-port and 4-port versions for carbureted or EFI-equipped engines. Features include: * EFI regulators are adjustable from 40 to100 psi * Carbureted regulators are adjustable from 4 to 9 psi * Compatible with gasoline, methanol, and E85 * 1/8 in. NPT gauge port * Designed for use with Holley VR1 and VR2 Series brushless in-line fuel pumps * Can be referenced on a 1:1 ratio--a barb fitting and a -4 AN fitting are included for reference connection * 2-port regulators feature -10 AN O-ring inlet/outlet and return * 4-port regulators feature -10 AN O-ring inlet and return with four -8 AN O-ring outlets
( 4 )
$399.95
—
$449.95
On Sale
Holley has responded to the expanding late model marketplace by developing the most complete line-up of performance upgrades and engine swap products, including Holley power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps also work with Holley's special reservoir kit.
( 1 )
$549.95
$493.95
On Sale
Holley fuel pressure regulators are designed to provide the correct fuel pressure for any high performance vehicle. They're available in a variety of configurations and pressure ranges for both universal and vehicle-specific applications.
( 314 )
$374.95
On Sale
Holley adjustable fuel injection regulators are able to provide all of the fuel pressure that your high performance, fuel injected vehicle will require. They utilize a special wave spring to maintain constant fuel pressure. Some models are universal fit, while others are designed for specific vehicle applications. The regulators are available for inline or fuel rail mount, with various psi ranges. Select the adjustable unit tailored to your driving needs.
( 44 )
$420.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
